Яusso-Soviэt Forum
Russian or Soviet vehicles/armor modeling forum.
Russian or Soviet vehicles/armor modeling forum.
Hosted by Darren Baker, Jacques Duquette
Panda Hobby 1:35 2S6M Tunguska
hashaney
Joined: December 03, 2008
KitMaker: 11 posts
Armorama: 11 posts
Posted: Thursday, November 01, 2012 - 01:44 AM UTC
This is my build on PH Tunguska M... The most obvious is the part B102 (Commander's Vision Block) is only 1 available.. Did some scratchbuilt. The instruction manual is so small and hard to understand the exact orientation. Had to based on real photos. Here goes from my own blog....
hashaney
Joined: December 03, 2008
KitMaker: 11 posts
Armorama: 11 posts
Posted: Thursday, November 01, 2012 - 01:54 AM UTC
Another pics...
The Radar face had to be puttied because of sink hole
Some small part on the gun are not fix because its so difficult to put missile assembly next to it...
Just fix one cable but the attachment is fix in place
This is how the PE part on the rear should look like. The instruction is so confuse...
The Radar face had to be puttied because of sink hole
Some small part on the gun are not fix because its so difficult to put missile assembly next to it...
Just fix one cable but the attachment is fix in place
This is how the PE part on the rear should look like. The instruction is so confuse...
valholm
Joined: January 14, 2012
KitMaker: 19 posts
Armorama: 13 posts
Posted: Thursday, November 01, 2012 - 02:00 AM UTC
Ah, the new Tunguska from Panda. I want that too 
- Will follow you progress and hopefully pick up some hits and tricks along the way too.
How does the kit hold together? Any flash or parts that does not fit properly?
- Will follow you progress and hopefully pick up some hits and tricks along the way too.How does the kit hold together? Any flash or parts that does not fit properly?
hashaney
Joined: December 03, 2008
KitMaker: 11 posts
Armorama: 11 posts
Posted: Thursday, November 01, 2012 - 02:04 AM UTC
Rear Turret PE
The "not enough" B102 part is been scratchbuilt with Epoxy Putty. The two white thing on the commander's hatch.
Prime with Gunze Surfacer 1000
Using Gunze Solvent based paint C301 Extra Dark Gray, C303 Green and C319 Yellow and C33 Flat Black for the Guns. Based on Moscow Victory Parade 2008 Photos except the top side which I could not find in the internet. This is the outcome:
The "not enough" B102 part is been scratchbuilt with Epoxy Putty. The two white thing on the commander's hatch.
Prime with Gunze Surfacer 1000
Using Gunze Solvent based paint C301 Extra Dark Gray, C303 Green and C319 Yellow and C33 Flat Black for the Guns. Based on Moscow Victory Parade 2008 Photos except the top side which I could not find in the internet. This is the outcome:
hashaney
Joined: December 03, 2008
KitMaker: 11 posts
Armorama: 11 posts
Posted: Thursday, November 01, 2012 - 02:10 AM UTC
Quoted Text
Ah, the new Tunguska from Panda. I want that too
How does the kit hold together? Any flash or parts that does not fit properly?
The kit hold very good. Some not so hard flash to remove but not a big deal actually... Pack with small small part and very detail kit
hashaney
Joined: December 03, 2008
KitMaker: 11 posts
Armorama: 11 posts
Posted: Thursday, November 01, 2012 - 02:18 AM UTC
Here is the comparison picture... Not sure is the green is right. The top side is fictions and it base on my logic...
Left side
.jpg)
Right Side
.jpg)
Left side
Right Side
aristeidis
Joined: September 15, 2012
KitMaker: 621 posts
Armorama: 592 posts
Posted: Thursday, November 01, 2012 - 02:31 AM UTC
Nice work and nice kit! Can you please confirm the numbers of the colors used? Especially the light buff color!!
hashaney
Joined: December 03, 2008
KitMaker: 11 posts
Armorama: 11 posts
Posted: Thursday, November 01, 2012 - 02:35 AM UTC
Quoted Text
Nice work and nice kit! Can you please confirm the numbers of the colors used? Especially the light buff color!!
Sorry, my mistake. Its C313 Yellow. The rest is correct. The Dark Gray is added a bit flat black...
aristeidis
Joined: September 15, 2012
KitMaker: 621 posts
Armorama: 592 posts
Posted: Thursday, November 01, 2012 - 02:39 AM UTC
Quoted Text
Quoted TextNice work and nice kit! Can you please confirm the numbers of the colors used? Especially the light buff color!!
Sorry, my mistake. Its C313 Yellow. The rest is correct. The Dark Gray is added a bit flat black...
Thank you! Keep up the good work!
bison126
Joined: June 10, 2004
KitMaker: 5,329 posts
Armorama: 5,204 posts
Posted: Thursday, November 01, 2012 - 03:04 AM UTC
Thanks for sharing your experience on this kit. It is looking really good with its paint on.
Olivier
Olivier
Gorizont
Joined: November 28, 2007
KitMaker: 1,462 posts
Armorama: 1,289 posts
Posted: Thursday, November 01, 2012 - 03:41 AM UTC
Nice build so far!
Since some months I waited for this kit. (see my thread some months ago.
greetings and thanks for the in-progress images!!!
Since some months I waited for this kit. (see my thread some months ago.
greetings and thanks for the in-progress images!!!
floggerspam
Joined: October 02, 2008
KitMaker: 119 posts
Armorama: 118 posts
Posted: Thursday, November 01, 2012 - 04:49 AM UTC
Very nice build !!
The Trumpy T-64A is $#@!*&^ $60.00 !!! AAAHHHHH!!!!!
Cheers
John
The Trumpy T-64A is $#@!*&^ $60.00 !!! AAAHHHHH!!!!!
Cheers
John
zontar
Joined: August 27, 2006
KitMaker: 1,646 posts
Armorama: 1,557 posts
Posted: Thursday, November 01, 2012 - 06:52 AM UTC
Hashaney: very nice build! You've captured the example paint job quite well. Thanks for sharing!
Happy Modeling, -zon
Happy Modeling, -zon
SGTJKJ
#041
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Thursday, November 01, 2012 - 07:02 AM UTC
Great job on the camouflage. It is spot on with the pictures of the real thing.
Looking forward to see more
Looking forward to see more
hashaney
Joined: December 03, 2008
KitMaker: 11 posts
Armorama: 11 posts
Posted: Thursday, November 01, 2012 - 04:27 PM UTC
Thanks guy for the encouragement. Anyway, does anyone have any photos with this scheme on the top side. I still can do some adjustment and correction...
Thanks in advance
Thanks in advance
juge75
Joined: May 02, 2009
KitMaker: 843 posts
Armorama: 841 posts
Posted: Thursday, November 01, 2012 - 06:36 PM UTC
The kit and this photo two different version tunguska.
Panda kit is M, Photo M1.
Te running wheels, track links and fenders different the M and M1 and M2.
Panda kit is M, Photo M1.
Te running wheels, track links and fenders different the M and M1 and M2.
juge75
Joined: May 02, 2009
KitMaker: 843 posts
Armorama: 841 posts
Posted: Thursday, November 01, 2012 - 06:44 PM UTC
Kit is M version, photos the real M:
Belorus M, parade.
Berezina 2002:
Photos: Miroslav Gyűrösi.
Belorus M, parade.
Berezina 2002:
Photos: Miroslav Gyűrösi.
juge75
Joined: May 02, 2009
KitMaker: 843 posts
Armorama: 841 posts
Posted: Thursday, November 01, 2012 - 06:49 PM UTC
Tunguska M version:
juge75
Joined: May 02, 2009
KitMaker: 843 posts
Armorama: 841 posts
Posted: Thursday, November 01, 2012 - 06:52 PM UTC
Tunguska M1:
hashaney
Joined: December 03, 2008
KitMaker: 11 posts
Armorama: 11 posts
Posted: Thursday, November 01, 2012 - 07:59 PM UTC
Quoted Text
The kit and this photo two different version tunguska.
Panda kit is M, Photo M1.
Te running wheels, track links and fenders different the M and M1 and M2.
Thanks for the head-up... Did notice that, only the lower hull is different... The rest is the same I think except some variant with different search radar. Maybe can swap with M1 and M2 lower hull later or just change the road wheel and track since I won't glue the hull...
pilote14
Joined: November 01, 2010
KitMaker: 459 posts
Armorama: 432 posts
Posted: Thursday, November 01, 2012 - 08:20 PM UTC
Nice build and nice paint ! i want one !
juge75
Joined: May 02, 2009
KitMaker: 843 posts
Armorama: 841 posts
Posted: Thursday, November 01, 2012 - 08:27 PM UTC
Yes, very nice paint!
hashaney
Joined: December 03, 2008
KitMaker: 11 posts
Armorama: 11 posts
Posted: Thursday, November 01, 2012 - 08:44 PM UTC
Quoted Text
Yes, very nice paint!
Can you translate for me please? I mean the picture
Gorizont
Joined: November 28, 2007
KitMaker: 1,462 posts
Armorama: 1,289 posts
Posted: Thursday, November 01, 2012 - 09:07 PM UTC
Quoted Text
Quoted TextYes, very nice paint!
Can you translate for me please? I mean the picture
I tried to translate some words using bing-translator... that was not possible.
(but funny to read some of the words)
greetings...
Soeren
hashaney
Joined: December 03, 2008
KitMaker: 11 posts
Armorama: 11 posts
Posted: Thursday, November 01, 2012 - 09:36 PM UTC
Still waiting for the translation 
Some small updates...
Track assembly.... 212 guide horn to installed
... Just finished one side...
Wheel composition to be painted. 4 road wheel in each camouflage colours..
Lower hull is painted and wheels are dry fit attached
Right side
Left side
Withe upper hull attached to see the result
Some small updates...
Track assembly.... 212 guide horn to installed
... Just finished one side... Wheel composition to be painted. 4 road wheel in each camouflage colours..
Lower hull is painted and wheels are dry fit attached
Right side
Left side
Withe upper hull attached to see the result
 |
WEB HOSTING BY
Copyright ©2021 Armorama and Kitmaker Network, a subsidiary of Silver Star Enterprises
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.