Hi fellas
this is my first posting in RRB . (so be nice to me..hehe :-) )
This is custom dioramics Flak embankment.
I build it for a friend of mine.
This is also my first time painting any wall embankment. Using a couple of techniques.
I painted it using various colors. I pre-shaded with Flat Black and then using various earth tone and grey color.
Then I dry brush with buff, grey, dark yellow, mid stone.
Then a raw umber and black oil wash were given to the bunker.
Please be patience with the photos...it's large (forgive me for this)...
Here are the photos..
The grass were woodland scenic static grass painted with various shade of green and yellow. The dead tree was backyard dead tree root.
The door is still unfinished. Will add a few rust streak to it.
this is still in progress and I hope to get a very good constructive comments on the color and painting.
Soon, they're going to be a flak and a few figurines added to the diorama.
I hope i can get as many consturctive comments ti improve this enbankment.
thanks for viewing.!
Constructive Feedback
For in-progress or completed build photos. Give and get contructive feedback!
For in-progress or completed build photos. Give and get contructive feedback!
Hosted by Darren Baker, Dave O'Meara
Flak bunker
Silantra
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Sunday, September 11, 2005 - 02:08 PM UTC
ShermiesRule
Michigan, United States
Joined: December 11, 2003
KitMaker: 5,409 posts
Armorama: 3,777 posts
Joined: December 11, 2003
KitMaker: 5,409 posts
Armorama: 3,777 posts
Posted: Sunday, September 11, 2005 - 02:20 PM UTC
Looks great. I'm sure later when you add the gun and figs it will look better. Don't forget to add trash and debris
Posted: Sunday, September 11, 2005 - 02:43 PM UTC
It's looking very good Zaidi, I like the way you painted the concrete, very realistic. But there are some prominent airbubbles on the edge of the wall, by the tree. You should either fill them in or srape them out a bit ( rough) to simulate wear or damage.
A few ruststreaks on the door would look good, but what happend to the door handle... .
Looking forward to the addition of the Flak.
Cheers
Henk
A few ruststreaks on the door would look good, but what happend to the door handle... .
Looking forward to the addition of the Flak.
Cheers
Henk
beachbum
Kuala Lumpur, Malaysia
Joined: March 05, 2004
KitMaker: 1,735 posts
Armorama: 586 posts
Joined: March 05, 2004
KitMaker: 1,735 posts
Armorama: 586 posts
Posted: Sunday, September 11, 2005 - 03:30 PM UTC
Pre shading came out very well Zaidi. A good overall finish. Just some small suggestions.
1. It may be the contrast on the photos but adding a few more black oil wash might bring out the finer wall details a bit better.
2. Also a bit of light green and/or brown wash on the areas of the wall near ground level and steps to simulate moss and mud might help the place look more like its been around a while.
3. Roughening up some of the edges especially on the steps may give it a more "used" look too.
4. If you like you could add a bit of fine sized soil on the steps and at the edges of the floor to simulate the mud left behind by soldiers moving around.
Small details though as you've definitely done a fair bit of work on this one, my friend.
1. It may be the contrast on the photos but adding a few more black oil wash might bring out the finer wall details a bit better.
2. Also a bit of light green and/or brown wash on the areas of the wall near ground level and steps to simulate moss and mud might help the place look more like its been around a while.
3. Roughening up some of the edges especially on the steps may give it a more "used" look too.
4. If you like you could add a bit of fine sized soil on the steps and at the edges of the floor to simulate the mud left behind by soldiers moving around.
Small details though as you've definitely done a fair bit of work on this one, my friend.
95bravo
Kansas, United States
Joined: November 18, 2003
KitMaker: 2,242 posts
Armorama: 504 posts
Joined: November 18, 2003
KitMaker: 2,242 posts
Armorama: 504 posts
Posted: Sunday, September 11, 2005 - 03:32 PM UTC
I like it as well.
My only suggestion would to be to add faint rust streaks in various locations along the wall where they would have removed the wires that held the forms, or perhaps spot where the re-bar would be exposed. And perhaps a faint hint of moss along the lower parts of the wall near the grass.
Can't wait to see it it when it's complete!
My only suggestion would to be to add faint rust streaks in various locations along the wall where they would have removed the wires that held the forms, or perhaps spot where the re-bar would be exposed. And perhaps a faint hint of moss along the lower parts of the wall near the grass.
Can't wait to see it it when it's complete!
Silantra
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Sunday, September 11, 2005 - 03:59 PM UTC
thanks gentlemen your your quick replies...
Henk, i dont know if there is a handle for the door... i only noticed about the bubble after the base coat was applied. I try to fill them with Mr Surfacer but they still showed.. i think i may take your suggestion to scrap them to look like battle damage or maybe bullet hole..
Thanks for the suggestion CK..yes i think the wall need some black washes.... However the raw umber wash was given and it's still need more shadow...
any ideas on how to do the realistic moss?? can plaster and some glossy green colors do it??
i will ground some fine sand later...i think it need some extra fine sands...
will take your ideas as well..
thanks guys!!
Quoted Text
It's looking very good Zaidi, I like the way you painted the concrete, very realistic. But there are some prominent airbubbles on the edge of the wall, by the tree. You should either fill them in or srape them out a bit ( rough) to simulate wear or damage.
A few ruststreaks on the door would look good, but what happend to the door handle... .
Looking forward to the addition of the Flak.
Cheers
Henk
Henk, i dont know if there is a handle for the door... i only noticed about the bubble after the base coat was applied. I try to fill them with Mr Surfacer but they still showed.. i think i may take your suggestion to scrap them to look like battle damage or maybe bullet hole..
Quoted Text
Pre shading came out very well Zaidi. A good overall finish. Just some small suggestions.
1. It may be the contrast on the photos but adding a few more black oil wash might bring out the finer wall details a bit better.
2. Also a bit of light green and/or brown wash on the areas of the wall near ground level and steps to simulate moss and mud might help the place look more like its been around a while.
3. Roughening up some of the edges especially on the steps may give it a more "used" look too.
4. If you like you could add a bit of fine sized soil on the steps and at the edges of the floor to simulate the mud left behind by soldiers moving around.
Small details though as you've definitely done a fair bit of work on this one, my friend
Thanks for the suggestion CK..yes i think the wall need some black washes.... However the raw umber wash was given and it's still need more shadow...
any ideas on how to do the realistic moss?? can plaster and some glossy green colors do it??
i will ground some fine sand later...i think it need some extra fine sands...
Quoted Text
I like it as well.
My only suggestion would to be to add faint rust streaks in various locations along the wall where they would have removed the wires that held the forms, or perhaps spot where the re-bar would be exposed. And perhaps a faint hint of moss along the lower parts of the wall near the grass.
Can't wait to see it it when it's complete!
will take your ideas as well..
thanks guys!!
jimbrae
Provincia de Lugo, Spain / Espaņa
Joined: April 23, 2003
KitMaker: 12,927 posts
Armorama: 9,486 posts
Joined: April 23, 2003
KitMaker: 12,927 posts
Armorama: 9,486 posts
Posted: Monday, September 12, 2005 - 03:37 AM UTC
I really think you have done total justice to this kit - superb!
Regarding further weathering, I wouldn't personally go over the top with it although one thing I would suggest is the following: many times when concrete is poured, at the joints, here can be a build up of a white, salt-like substance - perhaps you could consider this? Just remember, that many of these bunkers were relatively new at the end of WW2 so there would be (some) weathering but not in excessive quantities...
What are you going to mount in it? I have the Tristar 2cm AA gun and am looking for something similar to do a small dio on the Normandy coast - so yours has come at an excellent time for me!...JIm
Regarding further weathering, I wouldn't personally go over the top with it although one thing I would suggest is the following: many times when concrete is poured, at the joints, here can be a build up of a white, salt-like substance - perhaps you could consider this? Just remember, that many of these bunkers were relatively new at the end of WW2 so there would be (some) weathering but not in excessive quantities...
What are you going to mount in it? I have the Tristar 2cm AA gun and am looking for something similar to do a small dio on the Normandy coast - so yours has come at an excellent time for me!...JIm
beachbum
Kuala Lumpur, Malaysia
Joined: March 05, 2004
KitMaker: 1,735 posts
Armorama: 586 posts
Joined: March 05, 2004
KitMaker: 1,735 posts
Armorama: 586 posts
Posted: Monday, September 12, 2005 - 12:22 PM UTC
Zaidi you can simulate the moss with drybrushing with a super diluted light green wash. I got lots of fine sand already sorted out. If you need the soil just call me or drop by the next time your with the Home Ministry visiting TESCO Puchong.
Silantra
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Monday, September 12, 2005 - 12:37 PM UTC
Quoted Text
I really think you have done total justice to this kit - superb!
Regarding further weathering, I wouldn't personally go over the top with it although one thing I would suggest is the following: many times when concrete is poured, at the joints, here can be a build up of a white, salt-like substance - perhaps you could consider this? Just remember, that many of these bunkers were relatively new at the end of WW2 so there would be (some) weathering but not in excessive quantities...
What are you going to mount in it? I have the Tristar 2cm AA gun and am looking for something similar to do a small dio on the Normandy coast - so yours has come at an excellent time for me!...JIm
Jim, thanks for your kind words and suggestion...that also will take in my consideration...
the bunker will be mount with Flak 43....even though i found that there is not enough space for the Flak to tranverse 360 degree but that's is what my friend ask me to do...the kit is Italeri Flak 43...
CK,
thanks for the offer.... next time i'll be in puchong i let u know..or perhaps u could have a tea tarik just like the good old days..haha
eerie
United Kingdom
Joined: September 26, 2004
KitMaker: 1,008 posts
Armorama: 242 posts
Joined: September 26, 2004
KitMaker: 1,008 posts
Armorama: 242 posts
Posted: Monday, September 12, 2005 - 07:40 PM UTC
Superb Superb
Silantra
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Monday, March 13, 2006 - 06:02 AM UTC
hi again fellas...
it's been 6 months already since my last update. pardon me...i tend to forgot things.. hehe
well, last firday, beachbum paid me a visit and suggested me to finish this diorama and post it to Armorama... after he left, i think he's right. so here it goes
this is Italeri Flak 43 build OOTB
i painted it with tamiya german grey and i overspray flat white to the center of the panel. The flak barrel was painted with Gunze Mr Metal. The gold round was painted with Mr Metal gold.
The challange was to get the 'basket net' into the shape.
Photos of the flak mounted inside the bunker:
The leaves had grown after 6 months.
I use dried small tress which i found in the back garden and glue them the the tree branches.
The figures are ready. The one standing in the bunker is from DML set.
The figure reading the newspaper is from LEgend Production. I dont know what happen, the newspaper was lost. I got the newspaper from Tamiya field briefing set .. and now it's gone. So who know anybody that make 1/35 print out?
the other 2 figures are from CMK resin kit.
All figures were painted with vallejo and tamiya paints.
this is the look of the completed diorama from various angle and camera setting
more photos, please click here
comments are welcome. let me know what do u think, and how to improve my skill.
thanks for veiwing
it's been 6 months already since my last update. pardon me...i tend to forgot things.. hehe
well, last firday, beachbum paid me a visit and suggested me to finish this diorama and post it to Armorama... after he left, i think he's right. so here it goes
this is Italeri Flak 43 build OOTB
i painted it with tamiya german grey and i overspray flat white to the center of the panel. The flak barrel was painted with Gunze Mr Metal. The gold round was painted with Mr Metal gold.
The challange was to get the 'basket net' into the shape.
Photos of the flak mounted inside the bunker:
The leaves had grown after 6 months.
I use dried small tress which i found in the back garden and glue them the the tree branches.
The figures are ready. The one standing in the bunker is from DML set.
The figure reading the newspaper is from LEgend Production. I dont know what happen, the newspaper was lost. I got the newspaper from Tamiya field briefing set .. and now it's gone. So who know anybody that make 1/35 print out?
the other 2 figures are from CMK resin kit.
All figures were painted with vallejo and tamiya paints.
this is the look of the completed diorama from various angle and camera setting
more photos, please click here
comments are welcome. let me know what do u think, and how to improve my skill.
thanks for veiwing
MEBM
Indiana, United States
Joined: July 19, 2003
KitMaker: 1,055 posts
Armorama: 530 posts
Joined: July 19, 2003
KitMaker: 1,055 posts
Armorama: 530 posts
Posted: Monday, March 13, 2006 - 06:19 AM UTC
Looks good! I have a couple of questions: Where did you get this bunker, and how much did it cost? Thanks for your time.
Silantra
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Monday, March 13, 2006 - 06:33 AM UTC
Quoted Text
Looks good! I have a couple of questions: Where did you get this bunker, and how much did it cost? Thanks for your time.
the bunker is manufactured by Custom Dioramics. As mentioned in my first posting, a friend of mine got all of them and ask me to build it. I think he got it from eBay. Sorry mate, i didnt know who much it cost. Probably around $20.
but i think there're many store over there that carry custom dioramics products.
cheers
umustb
Singapore / 新加坡
Joined: April 27, 2005
KitMaker: 1,396 posts
Armorama: 0 posts
Joined: April 27, 2005
KitMaker: 1,396 posts
Armorama: 0 posts
Posted: Monday, March 13, 2006 - 04:19 PM UTC
Hi there Zaidi... 6 months has been a long time but hey... who cares when it's such an awesome build. Great job there.
A little observation and I notice a seamline on the hand of the soldier holding the MG.
A little observation and I notice a seamline on the hand of the soldier holding the MG.
keenan
Indiana, United States
Joined: October 16, 2002
KitMaker: 5,272 posts
Armorama: 2,844 posts
Joined: October 16, 2002
KitMaker: 5,272 posts
Armorama: 2,844 posts
Posted: Monday, March 13, 2006 - 04:38 PM UTC
Question and a suggestion:
Is the bunker big enough to allow the flak to rotate 360 degrees? In the first picture it looks like the brass catcher would hit the wall. It may be the angle of the picture.
Suggestion: Turn the MG42 right side up. I don't think anyone, soldier or civilian would put a rifle muzzle down and lean on it. Asking for trouble with that.
Looks great and thanks for the up date.
Shaun
Is the bunker big enough to allow the flak to rotate 360 degrees? In the first picture it looks like the brass catcher would hit the wall. It may be the angle of the picture.
Suggestion: Turn the MG42 right side up. I don't think anyone, soldier or civilian would put a rifle muzzle down and lean on it. Asking for trouble with that.
Looks great and thanks for the up date.
Shaun
MrMox
Aarhus, Denmark
Joined: July 18, 2003
KitMaker: 3,377 posts
Armorama: 1,088 posts
Joined: July 18, 2003
KitMaker: 3,377 posts
Armorama: 1,088 posts
Posted: Monday, March 13, 2006 - 04:51 PM UTC
Nice work, looks really great.
I dont know about bunkers in France or other places, but in Denmark a lot of the bunkers were actually painted to blend in with the surroundings, and even today they show signs of applied camuflage in dunkelgelb, green and brown.
The steeldoors I have seen are mostly painted yellow and are even today in fairly good shape especially those protected from the wheather.
Considering that most of those bunkers in the atlanticwall was between 2-3 years old when the war ended I would recon, that wear and wheathering would be at a minimum - allso considering that maintanace is allways used to keep soldiers everywhere occupied :-)
Attractive as the little tree is, I would suspect that most guncrews would cut it down to get a free field of fire and view?
I like the figures a lot, they bring life to the scene and are well executed!
I dont know about bunkers in France or other places, but in Denmark a lot of the bunkers were actually painted to blend in with the surroundings, and even today they show signs of applied camuflage in dunkelgelb, green and brown.
The steeldoors I have seen are mostly painted yellow and are even today in fairly good shape especially those protected from the wheather.
Considering that most of those bunkers in the atlanticwall was between 2-3 years old when the war ended I would recon, that wear and wheathering would be at a minimum - allso considering that maintanace is allways used to keep soldiers everywhere occupied :-)
Attractive as the little tree is, I would suspect that most guncrews would cut it down to get a free field of fire and view?
I like the figures a lot, they bring life to the scene and are well executed!
Silantra
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Tuesday, March 14, 2006 - 06:21 AM UTC
Quoted Text
Hi there Zaidi... 6 months has been a long time but hey... who cares when it's such an awesome build. Great job there.
A little observation and I notice a seamline on the hand of the soldier holding the MG.
JM, thanks. You have a very sharp eyes. Yeah..i noticed it too just after eading your post..now it's too late for me...
Quoted Text
Question and a suggestion:
Is the bunker big enough to allow the flak to rotate 360 degrees? In the first picture it looks like the brass catcher would hit the wall. It may be the angle of the picture.
Suggestion: Turn the MG42 right side up. I don't think anyone, soldier or civilian would put a rifle muzzle down and lean on it. Asking for trouble with that.
Looks great and thanks for the up date.
Shaun
Shaun,
as mentioned in my earlier post, there's no enough space for the flak to rotate 360 degree. i found this during construction stage and i told my friend about this, well he just said it's ok sicne this is a display model and the flak will never rotate. that's his answer..so i continued the work. but it's not that bad...the brass catcher would touch the wall if the flak is rotate...
about the soldier holding the MG :
well actually, in this diorama my friends specifically mentioned that he want the diorama in really relax scene that's why he rejected when i decided to use flak crew set. instead he wanted s few relax soldier on the bunker. So i decided to posed the figure in relax mode and in the case of the figure that holding the MG, he's actually going to inspect and cleaning the MG. the mg is already unloaded and safe. I plan to put a few others thing beside that to really show that this 2 soldier were doing some maintance work to the MG... anyone have better suggestion of what to put? and being in the army, he knew better the risk of holding the mg and learn in front of the muzzle like that
thanks for your comment and your time
Quoted Text
Nice work, looks really great.
I dont know about bunkers in France or other places, but in Denmark a lot of the bunkers were actually painted to blend in with the surroundings, and even today they show signs of applied camuflage in dunkelgelb, green and brown.
The steeldoors I have seen are mostly painted yellow and are even today in fairly good shape especially those protected from the wheather.
Considering that most of those bunkers in the atlanticwall was between 2-3 years old when the war ended I would recon, that wear and wheathering would be at a minimum - allso considering that maintanace is allways used to keep soldiers everywhere occupied
Attractive as the little tree is, I would suspect that most guncrews would cut it down to get a free field of fire and view?
I like the figures a lot, they bring life to the scene and are well executed!
Jan,
thanks for your kind words,...
noted about the colors. I think in the earlier discussin in this thread of maybe in other thread with regards to ww2 bunker ,somebody pointed out about the color and even cammo bunker.
When i build this bunker, i simply dont do any research and i dont have any specific region where this bunker was. so i just observed the 3-4 years old wall around my house for the color and wethering reference....
thanks for mention it once again.........
about the tree, notice in the early stages when the leaves were not gorwn yet, i plan to put the tree just like that, without the leaves... but somehow after 6 months, i forgot and the leaves has grown...
many many thanks guys for your observation and comments
cheers
zaidi
moJimbo
Shah Alam, Malaysia
Joined: October 06, 2004
KitMaker: 986 posts
Armorama: 387 posts
Joined: October 06, 2004
KitMaker: 986 posts
Armorama: 387 posts
Posted: Tuesday, March 14, 2006 - 08:52 AM UTC
what most impressed me are the groundwork and the bunker. as is shown in your earlier pics in september, the painting and weathering are really good.
the tree is well done too... i agree with mrMox that in reality it will block the flak's field of fire. the barbed wire is a nice touch. btw how did you do the wire?
the 37mm flak looks nice, though perhaps it will stand out more if you painted it in dark yellow to contast with the grey bunker.
for the figs, individually they are ok, though IMO some variation will help. of the 4 crewmen on the bunker maybe you can use different headgear or a bare head, or different uniforms i.e: camo smocks or a blue luftwaffe uniform... anyway, the standing pair look like twins (?)...
correct me if i'm wrong, but the aa gunsight on the MG34 should only be fitted if the gun is on an AA tripod mount... the dude with the MG42- his hand isn't rested properly on the gun butt....and is the camo-clad fig pointing his mp44 at his 'crown jewels'? ouch!
overall, a good job!.. you should be proud of it...
the tree is well done too... i agree with mrMox that in reality it will block the flak's field of fire. the barbed wire is a nice touch. btw how did you do the wire?
the 37mm flak looks nice, though perhaps it will stand out more if you painted it in dark yellow to contast with the grey bunker.
for the figs, individually they are ok, though IMO some variation will help. of the 4 crewmen on the bunker maybe you can use different headgear or a bare head, or different uniforms i.e: camo smocks or a blue luftwaffe uniform... anyway, the standing pair look like twins (?)...
correct me if i'm wrong, but the aa gunsight on the MG34 should only be fitted if the gun is on an AA tripod mount... the dude with the MG42- his hand isn't rested properly on the gun butt....and is the camo-clad fig pointing his mp44 at his 'crown jewels'? ouch!
overall, a good job!.. you should be proud of it...
Silantra
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Tuesday, March 14, 2006 - 09:43 AM UTC
Quoted Text
what most impressed me are the groundwork and the bunker. as is shown in your earlier pics in september, the painting and weathering are really good.
the tree is well done too... i agree with mrMox that in reality it will block the flak's field of fire. the barbed wire is a nice touch. btw how did you do the wire?
the 37mm flak looks nice, though perhaps it will stand out more if you painted it in dark yellow to contast with the grey bunker.
for the figs, individually they are ok, though IMO some variation will help. of the 4 crewmen on the bunker maybe you can use different headgear or a bare head, or different uniforms i.e: camo smocks or a blue luftwaffe uniform... anyway, the standing pair look like twins (?)...
correct me if i'm wrong, but the aa gunsight on the MG34 should only be fitted if the gun is on an AA tripod mount... the dude with the MG42- his hand isn't rested properly on the gun butt....and is the camo-clad fig pointing his mp44 at his 'crown jewels'? ouch!
overall, a good job!.. you should be proud of it...
moJimbo....
thanks for your comments
the barbed wire is from Aber PE. I twisted them. painted with black then i washed them with raw umber, black and burnt seina oil paints...
i didnt realised the dude is resting his MG44 pointing at his ..ouch....
it's supposed to be rested by his side on the box. Man, thanks for correcting this...
the other crew are just fine as what my friend ask me to do...
perhaps a few personnel gears scattered on the floor would further enhance the diorama...i just have this idea
thanks
Grumpyoldman
Consigliere
Florida, United States
Joined: October 17, 2003
KitMaker: 15,338 posts
Armorama: 7,297 posts
Joined: October 17, 2003
KitMaker: 15,338 posts
Armorama: 7,297 posts
Posted: Tuesday, November 27, 2007 - 07:03 PM UTC
Nice to see this one pop up again- New Daddy!
Have you considered sending some photos for a nice On Display?
Have you considered sending some photos for a nice On Display?
Silantra
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Tuesday, November 27, 2007 - 07:19 PM UTC
Quoted Text
Nice to see this one pop up again- New Daddy!
Have you considered sending some photos for a nice On Display?
Hey Dave,
Thanks pal and how did you know this old stuff poped out..hehe
About the On Display thinghy, well nobody ask and my work is not really nice to be featured..
But I will be honored to..
ps: have you got my PM..sent a couples of PMs to you before....
Grumpyoldman
Consigliere
Florida, United States
Joined: October 17, 2003
KitMaker: 15,338 posts
Armorama: 7,297 posts
Joined: October 17, 2003
KitMaker: 15,338 posts
Armorama: 7,297 posts
Posted: Tuesday, November 27, 2007 - 07:28 PM UTC
Yes, but I figured I'd let the New Daddy get settled into the New Daddy Routine, before being pestered by an old grouch. PM has finally been answered. It was only TWO weeks late.
Scott or Keith for dioramas...
Scott for Tools and Supplies....
Hopefully more members will realize that none of the Editors bite, and are more than willing to work with members to get their works published. Who knows it just may help launch a new career for some!
Scott or Keith for dioramas...
Scott for Tools and Supplies....
Hopefully more members will realize that none of the Editors bite, and are more than willing to work with members to get their works published. Who knows it just may help launch a new career for some!
okdoky
Scotland, United Kingdom
Joined: April 30, 2007
KitMaker: 1,597 posts
Armorama: 806 posts
Joined: April 30, 2007
KitMaker: 1,597 posts
Armorama: 806 posts
Posted: Wednesday, November 28, 2007 - 01:37 PM UTC
Hi there
Only comments would be that placing the muzzle of the MG down onto the ground would pick up a nice thick plug of earth with a gun of that size and weight. He would be very popular with the firing team.
Better to have it resting on his toe of his thick boots or something more solid that would not get him on a charge for miss treating his weapon.
The same guy has a nice head angle that would give him a degree of interaction with the sitting guys if he were facing one or other.
I wonder if it would have been possible to convert the kneeling guy into one of the flak crew walking up the steps with mugs of hot coffee or something for the three other crew looking outwards with no MG there. After all they are not at risk with the other MG crew nearby. Better to only have their personal side arms handy on the wall.
If the kneeling guy's right leg was replaced with a streight leg he would already be stepping up. A photo of yourself climbing steps with coffee cups would give you an idea of how best to make the changes to the figure to get the angle of knees and feet in careful motion.
Would maybe help make the link between the two figure groups.
Lovely dio
Only comments would be that placing the muzzle of the MG down onto the ground would pick up a nice thick plug of earth with a gun of that size and weight. He would be very popular with the firing team.
Better to have it resting on his toe of his thick boots or something more solid that would not get him on a charge for miss treating his weapon.
The same guy has a nice head angle that would give him a degree of interaction with the sitting guys if he were facing one or other.
I wonder if it would have been possible to convert the kneeling guy into one of the flak crew walking up the steps with mugs of hot coffee or something for the three other crew looking outwards with no MG there. After all they are not at risk with the other MG crew nearby. Better to only have their personal side arms handy on the wall.
If the kneeling guy's right leg was replaced with a streight leg he would already be stepping up. A photo of yourself climbing steps with coffee cups would give you an idea of how best to make the changes to the figure to get the angle of knees and feet in careful motion.
Would maybe help make the link between the two figure groups.
Lovely dio
Silantra
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Wednesday, November 28, 2007 - 02:14 PM UTC
Quoted Text
Hi there
Only comments would be that placing the muzzle of the MG down onto the ground would pick up a nice thick plug of earth with a gun of that size and weight. He would be very popular with the firing team.
Better to have it resting on his toe of his thick boots or something more solid that would not get him on a charge for miss treating his weapon.
The same guy has a nice head angle that would give him a degree of interaction with the sitting guys if he were facing one or other.
I wonder if it would have been possible to convert the kneeling guy into one of the flak crew walking up the steps with mugs of hot coffee or something for the three other crew looking outwards with no MG there. After all they are not at risk with the other MG crew nearby. Better to only have their personal side arms handy on the wall.
If the kneeling guy's right leg was replaced with a streight leg he would already be stepping up. A photo of yourself climbing steps with coffee cups would give you an idea of how best to make the changes to the figure to get the angle of knees and feet in careful motion.
Would maybe help make the link between the two figure groups.
Lovely dio
Nige,
thanks for your comments..
However the date of this thread so long ago and changes to the setting is not possible now. The dio was not with me and it has found a new home somewhere far away from me.