135
Gecko Cruiser Mk.I A9

  • move
John built Gecko Models Cruiser MK I A9 mainly OOB. He only replaced the cables for the light and the spring for the antenna device with copper wire. Painted with Tamiya and weathered with AK.
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move

About the Author

About John Lindbom (JohnLindbom)
FROM: , SWEDEN


Comments

Nice job! Any tips or concern regarding assembly you can pass on?
SEP 27, 2019 - 05:50 AM
Nicely done! Just love these interwar era multi-turret tanks. Going to have to look into this one some more.
SEP 28, 2019 - 02:54 AM
Hello and thanks! The fitting is good, but there is need for Milliputy in some places. I got a space between the machinegun turrets and the fenders that needed filling. The interior is ok, so it is possible to leave the hatches open and see that there is something there. Be careful when removing the springs from the spruces and trimming them. I used the tracks supplied in the kit and they are well detailed, but they also easily splits apart when trying to stretch them a bit to get the right tension on them. Fruilmodels have tracks available. The PE for the exhaust is a bit tricky. I glued the “legs” in place and then the exhaust. I also replaced the two wooden blocks on the back with the real thing.
SEP 28, 2019 - 09:47 PM