A german captured KV1 model1941 with simplified turret CHKZ?
I am not sure,It was used first two parts wheel


I used a trumpeter kits: KV-1 Simplified Turret Mod.42 ,but on the barbette two back periscope's position is wrong,& I did it followed specification,it's mustn't be correct

A KV-3,illusion tank

remove some parts position,on the photo.

in the box Trumpeter given 1942 mod road wheel,I used parts form Trumpeter KV1-ADD.ARMOR kits,First two-parts road wheel.


Drill round hole on the tower.

kkiron兄又有新作啊 支持下~~~

Hi very good job so far , the applique armour on the front should be above the top of the drivers armoured plate not level , it sticks up by 45mm , easy to remidy , cut a new one but add the extra height , remove the kit part and kit new one cheers ian

Thanks very much for your suggest,IAN, a gold suggestion:) I will make a new one with plastic flitch
,
HI,my friend,wooshi,I am busy on my work, go on the report one weeks later

to be countinue:[]--

Hi i hope it is not to late but the lower fromt applique armour plate that is over the front towing brackets should have the rare circle cutr out not the oblong as per the kit , again easy to make from plastic card and a punch . good luck and happy new year cheers ian

Hi,my friends ,
I will go on it 3 days later,
& I just do some PE but not the applique armour,just in time
thanks very much for your new suggest,
I think I must do much more change on this KV,

& I will show more change on this kits next week
C[ ]

wire rope form a small factory,I get some for repair my bike but not on
the model.

I used putty to rebuild & fill up,It is innocuity,fastness,easy to mold.
&about 500g just sold about 10 dollars,could use for quite long times.so
I never use tamiya,gunze putty:)

fill the turret:)



IF there are some mistake that I can not find,check out,& I will rebuild it ,

I will share what I done in next week:)

good luck & enjoy your model!

YING/2008/1/6

Ying et al,
A friend of mine, Neil Stokes, did a presentation on KV and its variants from a modeling perspective at the last AMPS regional show we has here in the U.S. Here's the link to it. You may find some of the info useful.
KV Seminar
Regards,
Georg

PS: He's also writing a book on the same subject.

Georg,thaks very much!
IT'S a very good data for me,I am very enjoy it!