I have an idea but i can't imagine it
So if you have one please write it to me here

Pictures:





If you have an idea how i can continue write it down please

Put the table in between the sniper and the window. The sniper will sit on a chair in front of the table. Modify the window so that the 2 window panels are slightly open (kind of like ^) and the rifle muzzle will be in between the opening of the 2 window panels. The sniper will use the table as his platform. Put a smoking cigarette on the edge of the table (the butt stick out) next to the sniper. Put a wood cross or a small cross necklace on the table (like saving private Rayne, the sniper kiss the cross before kill). Need to modify the sniper to sit position, elbows on the table to support rifle.
Or
The sniper sit on the floor with legs crossed. Use window frame as rifle support. Same setting for the table but on the side.
If the sitting position height is not high enough to use window frame as rifle support, let the sniper sit on the chair to see if that works.
Just my 2 cents
Best Regards,
Steven Lu

Hi Polaris

If you can form another couple of floors in the same materials as you have already used and have the sniper in the top floor with stairs in the recess you have made in the floor try to knock out some small shell holes as if blasted by smaller caliber shells and have the sniper posed on the floor on an old matress or something with the rifle pointed towards the hole but no poking through.

You could have his observer with binoculers, a sub machine gun and a couple of grenades for defending if they get pounced on.

You could even have a German or three trying to creep up the stairs to set upon them.

Just a thought and hope you get some good work going.

Nige

I'm with Nige. The sniper wouldn't rest his barrel on the window frame. If you want to leave him in the laying position go with Nige's idea of the large caliber bullet holes with the barrel aiming towards the hole. Put the table over top of him so anyone looking through the window would (in theory) only see the table and not the man underneath. Also put him as far from the hole as possible, this would reduce the chance of anyone seeing his muzzle flash. I'd place him near the far left wall (opposite the window in picture three) with the hole near the floor on the wall with the window.

Anyways that's just my thoughts.

thank i will do it
just need new man
here is one :
it is not painted so...

i think it good for it

Are those modifications of the old Tamiya Russian Infantry?

No both of is from Zvezda's kit but i very modifited
But the helmet is from Tamiya's kit

Now the dio is in good progress:

I am back and the ground floor (just part of the floor)is almost done and the sniper got a new outfit
The building :

and the sniper without his rifle :

sorry for his arm it is not the final paints

Set him back 3ft from the window. Sniper in widow way is good silloette target

I,d knock a loophole(outside make look like battle damage) in one of the walls back him up a few inchs from it he would be able to make a shoot and see through it and not leave a target of himself. Table and inside leave gear. So far work looks good.

It will have 2 floor wit rooftop and the sniper will be on the 2nd floor
I will use your recommendation so i will make a "loophole"

thanks all

not a problem will be waiting to see how it turns out.