Hi Guys,
Wondering if anybody could fill me in on the length and diameter of the main part and also the length and diameter of the base part?
Cheers
Rob

If you search my posts you'll find one where I supplied the dimensions of the Duke, as well as a comparison of three different resin offerings to see which one was closest to being in scale. I think it may have been about six months ago. Unfortunately I don't have the time to look it up myself.

I found this reply from 18Bravo to a former post
"My own measurements:
DUKE ANTENNA (right front) 4 1/2" diameter can, 3' 5" in height; bottom of antenna to flange: 8", Portion underflange: 1' 5"

That would compute to the following in 1/35:
1/8" diameter; 1 5/32" tall; 7/32" bottom of antenna to flange; portion under flange 15/32"

There is also a topic that toward the bottom I included a drawing of a scaled down Duke, It is 1/8" to tall but the rest of the measurements work out good. Here is the link

https://armorama.kitmaker.net/forums/150674#1265800

Thanks Cory,
Good find, but there is still a more recent one (I think I sent that one from Iraq)in which I compared the Dukes from Legend, Cromwell, and a third which escapes me. Pro Art perhaps...
At any rate, I hope those measurements are what you need.

howe about blast
henk

and D.toys

Here's the other post I mentioned:

https://armorama.kitmaker.net/forums/150674&page=1&ord=1

By the way, the third resin firm was Vajra.

Rob,
Send me an e-mail ([email protected]) and I can send you a scan of the measurements in 1:1 scale as well as 1:35, if you might want to build your own...

John

Thanks For All The Info Guys
All will come in very handy
Greatfully appreciated
Cheers
Rob