And I hope to get some detailed information graphic.
Please help me.
Thanks again, the same hope you like it.
Blackwater
AFV SHOT KAL 1973
My ultimate goal
Production process
Hosted by Darren Baker
IDF Nagmackon （Production process) 1/35
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Saturday, January 29, 2011 - 12:54 AM UTC
As an avid fan IDF armored vehicles, Nagmachon is my favorite vehicles. I have been trying to accomplish it. But because there is no detailed information, the whole production process is very painful. Now I show them some pictures, I hope you help me point out the mistakes and shortcomings, I will improve it. Thank you very much.
And I hope to get some detailed information graphic.
Please help me.
Thanks again, the same hope you like it.
Blackwater
AFV SHOT KAL 1973
My ultimate goal
Production process
And I hope to get some detailed information graphic.
Please help me.
Thanks again, the same hope you like it.
Blackwater
AFV SHOT KAL 1973
My ultimate goal
Production process
gariwulf
Joined: May 22, 2008
KitMaker: 40 posts
Armorama: 39 posts
Posted: Saturday, January 29, 2011 - 02:04 AM UTC
HI WJ,
its a nice build indeed!
Im so interested in and look forward your next post!
Cheers
SiNam
its a nice build indeed!
Im so interested in and look forward your next post!
Cheers
SiNam
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Saturday, January 29, 2011 - 02:10 AM UTC
Thank you Nam
nakpadon
Joined: November 21, 2005
KitMaker: 86 posts
Armorama: 75 posts
Posted: Saturday, January 29, 2011 - 02:17 AM UTC
You are one of the best scratch builders i have come across and think what you have done so far is excellent. Would it not have been easier to buy Legends Nagmachon or do you like the challenge?
Keep up the good work,
Paul.
Keep up the good work,
Paul.
bison126
Joined: June 10, 2004
KitMaker: 5,329 posts
Armorama: 5,204 posts
Posted: Saturday, January 29, 2011 - 03:09 AM UTC
Hi Blackwater,
you're really a brave modeler to scratch this one.! I wish you all the best but I'm sure you'll get a stunning result in the end !
Olivier
you're really a brave modeler to scratch this one.! I wish you all the best but I'm sure you'll get a stunning result in the end !
Olivier
PedroA
Joined: December 27, 2010
KitMaker: 324 posts
Armorama: 322 posts
Posted: Sunday, January 30, 2011 - 12:12 AM UTC
Beautiful IDF model. I see another great job.
Regards. Pedro.
Regards. Pedro.
glock17c
Joined: May 16, 2007
KitMaker: 133 posts
Armorama: 130 posts
Posted: Tuesday, February 01, 2011 - 02:44 AM UTC
Dear Blackwater,
This is quite a project. Your scratch building skills are realy something.
As to reference material please watch this thread.
Please note the shape of the raised driver's location + hatch as can be seen in page 1 in the thread.
The model is highly accurate and based on concrete material.
http://www.idf-in-scale.com/forum/phpBB3/viewtopic.php?f=6&t=536&start=0
Michael Mass
This is quite a project. Your scratch building skills are realy something.
As to reference material please watch this thread.
Please note the shape of the raised driver's location + hatch as can be seen in page 1 in the thread.
The model is highly accurate and based on concrete material.
http://www.idf-in-scale.com/forum/phpBB3/viewtopic.php?f=6&t=536&start=0
Michael Mass
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Thursday, February 03, 2011 - 12:51 AM UTC
Quoted Text
You are one of the best scratch builders i have come across and think what you have done so far is excellent. Would it not have been easier to buy Legends Nagmachon or do you like the challenge?
Keep up the good work,
Paul.
Hello Paul
Is honored to have such a high rating you, thank you. I'm glad you like it.
Legend is indeed a very good choice, but I want to challenge it. I hope I can be successful.
Your friends
Blackwater
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Thursday, February 03, 2011 - 12:57 AM UTC
Quoted Text
Hi Blackwater,
you're really a brave modeler to scratch this one.! I wish you all the best but I'm sure you'll get a stunning result in the end !
Olivier
hi Olivier
Thank you for your blessing, I will do my best to finish it, when hope it will not disappoint you.
Cheers
Blackwater
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Thursday, February 03, 2011 - 01:08 AM UTC
Quoted Text
Beautiful IDF model. I see another great job.
Regards. Pedro.
Thank you, Pedro.
You like it. I am very happy. Your work is so perfect, masterpieces.
Nice to meet you. Thank you for your reply
Greetings
Blackwater
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Thursday, February 03, 2011 - 01:22 AM UTC
Quoted Text
Dear Blackwater,
This is quite a project. Your scratch building skills are realy something.
As to reference material please watch this thread.
Please note the shape of the raised driver's location + hatch as can be seen in page 1 in the thread.
The model is highly accurate and based on concrete material.
http://www.idf-in-scale.com/forum/phpBB3/viewtopic.php?f=6&t=536&start=0
Michael Mass
Hello Michael
Thank you for your link, this is a very good reference, so I have the courage to do it.
Once again express our sincere gratitude to you.
Your friends
Blackwater
miaonowitzki
Joined: July 27, 2008
KitMaker: 65 posts
Armorama: 63 posts
Posted: Thursday, February 03, 2011 - 05:26 PM UTC
顶黑水！
Captin_Caveman_III
Joined: October 20, 2008
KitMaker: 1,069 posts
Armorama: 1,062 posts
Posted: Thursday, February 03, 2011 - 09:09 PM UTC
I hope you build that cage as well. Grate photo by the way.
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Friday, February 04, 2011 - 01:02 AM UTC
Quoted Text
I hope you build that cage as well. Grate photo by the way.
Yes, I intend to challenge "cage. "
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Friday, February 04, 2011 - 01:03 AM UTC
Quoted Text
顶黑水！
谢谢，兄弟。
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Friday, February 04, 2011 - 01:13 AM UTC
February 4, 2011 Update
8 hours produced reactive armor, I'm exhausted. . . But I am very satisfied with the results. I hope you like it.
Blackwater
8 hours produced reactive armor, I'm exhausted. . . But I am very satisfied with the results. I hope you like it.
Blackwater
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Tuesday, February 08, 2011 - 03:17 AM UTC
Hello everybody
I was making when the turret window trouble, especially the edges. I use the plastic sheet and copper are not very successful. Is there any simple way? Is there any better material? Please share with me, very much need your help.
Any comments
Thank you very much
Blackwater
I was making when the turret window trouble, especially the edges. I use the plastic sheet and copper are not very successful. Is there any simple way? Is there any better material? Please share with me, very much need your help.
Any comments
Thank you very much
Blackwater
PedroA
Joined: December 27, 2010
KitMaker: 324 posts
Armorama: 322 posts
Posted: Tuesday, February 08, 2011 - 05:54 AM UTC
You can use my step by step, drawing the window. If you have not the program, you can say to me the distances. I will make the drawings for you.Regards. Pedro.
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Sunday, February 13, 2011 - 12:39 AM UTC
February 13 update
Side skirt armor, there are many details that need to make.
Tracked AFV, the effect is good.
There will be more pictures later. . . . .
Side skirt armor, there are many details that need to make.
Tracked AFV, the effect is good.
There will be more pictures later. . . . .
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Sunday, February 13, 2011 - 12:48 AM UTC
Thank you
BLACKWATER
Joined: August 05, 2010
KitMaker: 449 posts
Armorama: 441 posts
Posted: Sunday, February 13, 2011 - 01:28 AM UTC
Quoted Text
@:) You can use my step by step, drawing the window. If you have not the program, you can say to me the distances. I will make the drawings for you.
Regards. Pedro.
Hi Pedro
Thank you very much for your advice, I will try to draw the drawings. This will allow me to better understand its structure. The problem is I want to know what material to make it?
Bless you
Blackwater
Wisham
Joined: September 05, 2007
KitMaker: 133 posts
Armorama: 119 posts
Posted: Thursday, March 17, 2011 - 11:39 AM UTC
Wow, this is coming along fantastic. Good job, I look foward to more pics
guido
Joined: August 26, 2005
KitMaker: 437 posts
Armorama: 437 posts
Posted: Thursday, March 17, 2011 - 08:44 PM UTC
Simply F A N T A S T I C !!!!!!
nakpadon
Joined: November 21, 2005
KitMaker: 86 posts
Armorama: 75 posts
Posted: Thursday, March 17, 2011 - 09:29 PM UTC
Fantasic work. 
Captin_Caveman_III
Joined: October 20, 2008
KitMaker: 1,069 posts
Armorama: 1,062 posts
Posted: Tuesday, March 22, 2011 - 10:01 AM UTC
Man I have bin missing this sweet work. Black you have the tuch aka: top noch scratchbuilding skills. LOve your work man. An BTW I'm studying your work.
An BTW I'm studying your work. 
 |
WEB HOSTING BY
Copyright ©2021 Armorama and Kitmaker Network, a subsidiary of Silver Star Enterprises
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.