..so now its ready for wash
Яusso-Soviэt Forum: Cold War Soviet Armor
For discussions related to cold war era Russo-Soviet armor.
For discussions related to cold war era Russo-Soviet armor.
Hosted by Jacques Duquette
1/35 Ural Rocket Guntruck
KamilS
Joined: March 08, 2008
KitMaker: 225 posts
Armorama: 137 posts
Posted: Wednesday, February 22, 2012 - 06:23 AM UTC
a minor update:
..so now its ready for wash
..so now its ready for wash
KamilS
Joined: March 08, 2008
KitMaker: 225 posts
Armorama: 137 posts
Posted: Wednesday, February 22, 2012 - 11:31 AM UTC
and washed..:
By the way, according to some questions about ordering this set: as I said I hope that first serie will be ready to ship next week. At this moment I'm just collecting pre-orders to estimate the number of copies necessary to cast.
As for the payment method Paypal will be easiest way to set it.
I do not accept any payment until everything will be ready and conversions prepared for shipping. Then I will contact with each client and completed the deal.
By the way, according to some questions about ordering this set: as I said I hope that first serie will be ready to ship next week. At this moment I'm just collecting pre-orders to estimate the number of copies necessary to cast.
As for the payment method Paypal will be easiest way to set it.
I do not accept any payment until everything will be ready and conversions prepared for shipping. Then I will contact with each client and completed the deal.
KamilS
Joined: March 08, 2008
KitMaker: 225 posts
Armorama: 137 posts
Posted: Wednesday, February 22, 2012 - 11:10 PM UTC
There are some doubts about which kit will be the best as a base for this conversion. Answer is simple:
Ural 4320 from Omaga (qiute rare at this moment), ICM, Alanger and finally from Revell are the same kit, with the same sprues inside boxes. So my resin conversion should fit to all of them.
BTW, I used Alanger's one.
Best regards
~kamil
Ural 4320 from Omaga (qiute rare at this moment), ICM, Alanger and finally from Revell are the same kit, with the same sprues inside boxes. So my resin conversion should fit to all of them.
BTW, I used Alanger's one.
Best regards
~kamil
Spiderfrommars
Joined: July 13, 2010
KitMaker: 3,845 posts
Armorama: 3,543 posts
Posted: Wednesday, February 22, 2012 - 11:17 PM UTC
You've been doing a great job
It could be a silly question but I'd like to know what kind of resin you've used to replicate your parts
Congrats indeed
It could be a silly question but I'd like to know what kind of resin you've used to replicate your parts
Congrats indeed
KamilS
Joined: March 08, 2008
KitMaker: 225 posts
Armorama: 137 posts
Posted: Wednesday, February 22, 2012 - 11:31 PM UTC
to be honest, i'm not casting it myself, so i can't tell you anything about the resin. I just know, that it's the same, which some of you well know from the products of one of polish manufacture specialized in soviet AFVs :>
Karl187
#284
Joined: October 04, 2006
KitMaker: 3,094 posts
Armorama: 2,942 posts
Posted: Wednesday, February 22, 2012 - 11:54 PM UTC
Kamil- I reckon publishers would definetly be interested in this build, regardless of whether you've posted it here or not. It is such a unique build and so professionally done that it would be hard for any Editor to refuse, at least in my opinion anyway!
Fantastic work on the color scheme and wash, it really brings everything to life! Are you planning on setting it in a scene of some sort?
Fantastic work on the color scheme and wash, it really brings everything to life! Are you planning on setting it in a scene of some sort?
edklingon
Joined: October 11, 2010
KitMaker: 194 posts
Armorama: 173 posts
Posted: Thursday, February 23, 2012 - 03:17 AM UTC
Quoted Text
There are some doubts about which kit will be the best as a base for this conversion. Answer is simple:
Ural 4320 from Omaga (qiute rare at this moment), ICM, Alanger and finally from Revell are the same kit, with the same sprues inside boxes. So my resin conversion should fit to all of them.
~kamil
Thanks for this info, I have the Revell kit and will use it.
edklingon
Joined: October 11, 2010
KitMaker: 194 posts
Armorama: 173 posts
Posted: Thursday, February 23, 2012 - 03:19 AM UTC
Quoted Text
Kamil- I reckon publishers would definetly be interested in this build, regardless of whether you've posted it here or not. It is such a unique build and so professionally done that it would be hard for any Editor to refuse, at least in my opinion anyway!
Fantastic work on the color scheme and wash, it really brings everything to life! Are you planning on setting it in a scene of some sort?
Kamil. I have no doubts that Finescale, Military Modeler Magazine, AFV or any other magazine love to have the article!
KamilS
Joined: March 08, 2008
KitMaker: 225 posts
Armorama: 137 posts
Posted: Thursday, February 23, 2012 - 03:43 AM UTC
well.. will see
Vehicle is almost finished. I've add some paintchips and dirt. There are only pigments and some final touches left
Vehicle is almost finished. I've add some paintchips and dirt. There are only pigments and some final touches left
CMSFRAT
Joined: September 13, 2005
KitMaker: 7 posts
Armorama: 5 posts
Posted: Thursday, February 23, 2012 - 05:31 AM UTC
Hi Kamil,
This is Warmodles.... I have purchsed some of your built kits before on eBay.
I would like to know if you are selling this finished Gun Truck. I sent you an email some time back, asking if you would build one and sell it.
You can reply to [email protected]
Warm Regards,
Mark
This is Warmodles.... I have purchsed some of your built kits before on eBay.
I would like to know if you are selling this finished Gun Truck. I sent you an email some time back, asking if you would build one and sell it.
You can reply to [email protected]
Warm Regards,
Mark
KamilS
Joined: March 08, 2008
KitMaker: 225 posts
Armorama: 137 posts
Posted: Thursday, February 23, 2012 - 08:31 AM UTC
Hi Mark!
I will send you a message tonight.
And i hope you like the result of my work on this miniature:
I will send you a message tonight.
And i hope you like the result of my work on this miniature:
edklingon
Joined: October 11, 2010
KitMaker: 194 posts
Armorama: 173 posts
Posted: Thursday, February 23, 2012 - 12:08 PM UTC
ASTOUNDING! 
Karl187
#284
Joined: October 04, 2006
KitMaker: 3,094 posts
Armorama: 2,942 posts
Posted: Thursday, February 23, 2012 - 11:12 PM UTC
Its great to see this beast finished Kamil- simply outstanding work!
richtlv3
Joined: April 10, 2011
KitMaker: 95 posts
Armorama: 94 posts
Posted: Sunday, February 26, 2012 - 06:57 AM UTC
I can't find words man... it's just Great Work. are you sure it's not a real truck ??? 
KamilS
Joined: March 08, 2008
KitMaker: 225 posts
Armorama: 137 posts
Posted: Thursday, March 08, 2012 - 07:53 AM UTC
packing in progress..
everybody who has preordered this set shoud be prepared for a message from me soon
everybody who has preordered this set shoud be prepared for a message from me soon
Teaker11
Joined: July 02, 2009
KitMaker: 962 posts
Armorama: 786 posts
Posted: Thursday, March 08, 2012 - 08:04 AM UTC
Great I look forward to seeing this kit
Jim
Jim
KamilS
Joined: March 08, 2008
KitMaker: 225 posts
Armorama: 137 posts
Posted: Thursday, March 08, 2012 - 08:58 AM UTC
i hope you will receive it in about a week
edklingon
Joined: October 11, 2010
KitMaker: 194 posts
Armorama: 173 posts
Posted: Friday, March 09, 2012 - 05:45 AM UTC
Message received, and payment done!
KamilS
Joined: March 08, 2008
KitMaker: 225 posts
Armorama: 137 posts
Posted: Friday, March 09, 2012 - 06:09 AM UTC
thanks. i will ship your 'copy' on monday. by the way, all orders paid until 3pm (cet) was shipped today (i've just back from post office). i hope you will receive them soon
caryl576
Joined: April 23, 2011
KitMaker: 173 posts
Armorama: 165 posts
Posted: Friday, March 09, 2012 - 06:37 AM UTC
Simply outstanding work there. Really enjoyed following this one
SGTJKJ
#041
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Friday, March 09, 2012 - 07:07 AM UTC
Great build! Very interesting conversion.
Thanks for sharing
Thanks for sharing
Kylewaaagh
Joined: October 03, 2007
KitMaker: 34 posts
Armorama: 32 posts
Posted: Friday, March 09, 2012 - 07:40 AM UTC
Kamil-
You, sir, are a true master builder and modeler! A real artist. Fantastic work!
-Kyle
You, sir, are a true master builder and modeler! A real artist. Fantastic work!
-Kyle
juge75
Joined: May 02, 2009
KitMaker: 843 posts
Armorama: 841 posts
Posted: Friday, March 09, 2012 - 04:21 PM UTC
Kamil Congratulations!
 |
WEB HOSTING BY
Copyright ©2021 Armorama and Kitmaker Network, a subsidiary of Silver Star Enterprises
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.