Hi all,
in a previous topic I've asked pic of M1145...I've get something now I would know if someone can ID these antennas.
If you have other pics or if you can add a name to this devices that would be great.
Also...do you know if for these type of thing there's an AM set?!I know voyager did something but as far I know their products aren't these one in the photo.
Regards
Ciro

Hi Ciro,
Antenna # 2 is no Duke antenna I think it`s a VHF antenna. For antenna #1, you can use the one from AFV Clubs M1130 Stryker.
BTW have you got my drawings?

Cheers
Hans-Hermann

Hi Hans-Hermann!!
thank you very much for the drawings!it's a great thing you've done!!
Hmmm now I need to get these antennas....2nd type is also in the afv club equipment set so I need the VHF...
Cheers
Ciro

Ciro

The antenna #2 looks very similar to the VHF-AM & UHF-AM Antenna used with the GRC-206 system :

http://www.prc68.com/I/AS3588.shtml

Talking about the GRC-206, you'll find some more pics (+ informations and even some dimensions) here :

http://www.prc68.com/I/MT6250.shtml

HTH

Frenchy

Hi Ciro,

building the VHF is no problem, jusst cut a piece of 2 mm rod and a piece of 4 mm rod to lenght and wrap a piece of 0,5 mm wire around the 2 mm rod.

Cheers
Hans-Hermann

@ Frenchy
Merci for the additional pics of the AN/GRC 206

thank you Frenchy and Hans-Hermann!!suggestions and pics are really great!
Regards

Ciro

That second one is called a donkey di[k. (we call a fuel spout that too) I'd use this for the bottom:

http://www.google.com/imgres?q=flexible+straws&um=1&hl=en&sa=N&rls=com.microsoft:en-us:IE-SearchBox&rlz=1I7RNSM_enUS389&biw=1280&bih=572&tbm=isch&tbnid=Bj9qYf6QpmA1rM:&imgrefurl=http://www.uh.edu/engines/epi2047.htm&docid=Kxzw8tMnj0CGiM&imgurl=http://www.uh.edu/engines/flexstrawstraight.jpg&w=500&h=367&ei=1DSvTo3yO6eLiAKPnZkL&zoom=1&iact=hc&vpx=167&vpy=245&dur=2216&hovh=192&hovw=262&tx=118&ty=82&sig=115635588698593363610&page=1&tbnh=120&tbnw=160&start=0&ndsp=15&ved=1t:429,r:0,s:0

Great Idea Robert!I need to get this thing in the right size....hmmm...I can also add the wire as said by Hans and then add some putty to get a better look.I need to do some attempts.Anyway if I'm lucky enough to get the right donkey di[k that woulb be awesome.
Thank you!
Ciro