_GOTOBOTTOM
AFV Painting & Weathering
Answers to questions about the right paint scheme or tips for the right effect.
Mixing Washes
Trenchfoot
Visit this Community
Arkansas, United States
Joined: December 11, 2011
KitMaker: 18 posts
Armorama: 14 posts
Posted: Sunday, December 18, 2011 - 12:21 AM UTC
Hey All

Needing to mix some new washes. Normally I use a medium like Turpinoid or some such with an oil paint. I saw where someone...well several folks were using a thinner called Mona Lisa, and they commented that it was oderless and very mild on the existing basecoats of Acrylic paint. Anyone out there used this product before, and what were the results?

Thanks as always

Ken
(Trenchfoot 1*)
c5flies
Visit this Community
California, United States
Joined: October 21, 2007
KitMaker: 3,684 posts
Armorama: 2,938 posts
Posted: Sunday, December 18, 2011 - 04:31 AM UTC
Hey Ken,

I've used Mona Lisa odorless paint thinner before and can highly recommend it over acrylic paints...as for results, well only limited by my skill level

Also, at the time I purchased it (at Michaels) it was a fair bit cheaper than Turpenoid.

Trenchfoot
Visit this Community
Arkansas, United States
Joined: December 11, 2011
KitMaker: 18 posts
Armorama: 14 posts
Posted: Sunday, December 18, 2011 - 04:44 AM UTC
Thanks james

I just mixed up a new wash with it, and i like it...seems to flow better and doesn't leave that shiny film that Turpinoid did. Looks like I finally took a chance and it paid off.
Delbert
#073
Visit this Community
Pennsylvania, United States
Joined: October 05, 2002
KitMaker: 2,659 posts
Armorama: 1,512 posts
Posted: Sunday, December 18, 2011 - 08:40 AM UTC
Hey Ken..

I've used the Mona Lisa thinner a bunch of times.. I tend to mix my washs with oil paint and it works well for that. I've never had any problems with my base coats, Although I will say I mostly use enamels.

I've used both the Mona Lisa and turpinoid and the Mona Lisa seems to be a bit milder.

Delbert
Trenchfoot
Visit this Community
Arkansas, United States
Joined: December 11, 2011
KitMaker: 18 posts
Armorama: 14 posts
Posted: Sunday, December 18, 2011 - 10:34 AM UTC
Thanks

I swear, if I knew what I was doing when I build a model, I'd be dangerous!!!

scratchmod
Visit this Community
Massachusetts, United States
Joined: November 07, 2008
KitMaker: 796 posts
Armorama: 763 posts
Posted: Monday, December 19, 2011 - 01:06 AM UTC
I've been using it for the past 7 years and have had no problems with it s far. One thing I always do when using oils, even for washes, is to first place dabs of the oils on a piece of cardboard and let it sit for a good 15 minutes. The cardboard will soak up the linseed oil so when you mix your wash with the Mono Lisa thinner, you'll have a nice dead flat finish and no sheen.

Hope this helps.

oh yeah, the stuff is cheap and lasts a very long time.
 _GOTOTOP