I know I posted this here Lastnight so I will try again.
About 20 some odd years ago I did this in 1/87.
[img width=640 height=480]http://i1060.photobucket.com/albums/t455/lnerj72a/M901A2%20project/DSC08875.jpg[/img]

So once Revell came out with the M2/M3 Bradley (kit 03143)
I decided to try it withe the Hammerhead from ESCI's M901.
This is what I started with.
[img width=640 height=480]http://i1060.photobucket.com/albums/t455/lnerj72a/M901A2%20project/DSC08876.jpg[/img]

Here is where I am when I decide to take a break.
[img width=640 height=480]http://i1060.photobucket.com/albums/t455/lnerj72a/M901A2%20project/DSC08877.jpg[/img]

well it's after Midnight so I'll call it quits for now.

Great idea, only problem I see with your prototype is a lack of a reloading hatch in the rear. You've got a bunch of tools back there instead

Thanks for showing me that....
I "Did Not" remove my own posts.

have you considered the LOSAT Bradley?

http://www.google.com/imgres?num=10&hl=en&client=browser-ubuntu&hs=6ha&channel=fe&biw=1366&bih=649&tbm=isch&tbnid=Y45aTe4rNoXgbM:&imgrefurl=http://home.comcast.net/~mksheppard/SPCAMO/BradleyLOSAT/BradleyLOSAT.htm&imgurl=http://home.comcast.net/~mksheppard/SPCAMO/BradleyLOSAT/BradleyLOSAT.jpg&w=800&h=523&ei=fqNDUKmoF7H16AGv7IGIDQ&zoom=1&iact=rc&dur=400&sig=112092956312764776808&sqi=2&page=1&tbnh=133&tbnw=177&start=0&ndsp=20&ved=1t:429,r:1,s:0,i:76&tx=72&ty=61

Sorry....No
I never even heard of it.

Well "inspite" of Nay Sayers on weather or not this is a viable vehicle ....
The progress contenues
Here it is with a new roof:


Here are the parts from ESCI's Hammerhead:


Now, the TC hatch on the Hammerhead is molded closed, as shown here:


So I have taken the parts from ESCI's M113, Namely the TC hatch, so that I can add it to the Hammerhead mount:


I took the Hemmerhead mount, and sanded down the hatch till the M113 TC hatch fit to it:


I will add a MG ring and look for an M60/M60D for mounting to it.
If any questions, feel free to reply.