Hi Guy's,

I just bought the 35th Meng Bradley M2A3 with busk yesterday. I'm gonna start it when I get it. Have any of you guy's who have built this kit have any pointer's on anything to watch for building it or adding anything to it?

Thanks

Ben

Please make a search : http://www.google.com/custom?domains=armorama.com&q=M2A3+BUSK&sa=Search&sitesearch=armorama.com&client=pub-4463977780468403&forid=1&ie=ISO-8859-1&oe=ISO-8859-1&safe=active&flav=0000&sig=TLSTHwEtdKy6FG66&cof=GALT%3A%23008000%3BGL%3A1%3BDIV%3A%23336699%3BVLC%3A663399%3BAH%3Acenter%3BBGC%3AFFFFFF%3BLBGC%3A000000%3BALC%3A0000FF%3BLC%3A0000FF%3BT%3A000000%3BGFNT%3A0000FF%3BGIMP%3A0000FF%3BLH%3A50%3BLW%3A168%3BL%3Ahttp%3A%2F%2Farmorama.com%2Fimages%2Flogo.gif%3BS%3Ahttp%3A%2F%2Farmorama.com%3BFORID%3A1%3B&hl=en

Pascal has done a very job on his. The kit is superb, but not without some minor problems. As you begin, you may want to check out this thread:

https://armorama.kitmaker.net/forums/219834

I address a few of the problems in the engine bay. Later on when I get a chance to start building again I'll address the rear area, which does not reflect the 1/4 inch armor plates, but probably necessary since the went with the A/C units instead of the storage lockers.