_GOTOBOTTOM
AFV Painting & Weathering
Answers to questions about the right paint scheme or tips for the right effect.
Help with whitewashing
fireman1208
Visit this Community
North Carolina, United States
Joined: January 03, 2004
KitMaker: 4 posts
Armorama: 0 posts
Posted: Sunday, January 04, 2004 - 04:22 AM UTC
I have a German 8ton semitrack with quat 20mm mounted on it. I want to use it in a winter scene and want to white wash it (maybe) or what ever would look the best. Any ideas. I am up for anything, I just want it to look real.
One more question, I have found a good cheap camo net, I use the papertowels that have the woven cords in them. If you soak them long enough the paper will dislove leaving the cords. A little dye and they look great. The question is did they use cammo netting during the winter with snow and if so what did it look like.
Plasticbattle
#003
Visit this Community
Donegal, Ireland
Joined: May 14, 2002
KitMaker: 9,763 posts
Armorama: 7,444 posts
Posted: Sunday, January 04, 2004 - 05:54 AM UTC
Hi fireman. there was a post a few days about winter white-washing.

see here

Hopefully that will help you with what you want. I have added two different methods there.
About the camo nets ....... not sure. Why use camo nets if the vehicle is already camouflaged? Im not sure they made actual camo nets the camoīd for winter white ......... a white tarp would be more likely. Probably better to look for some reference for this one!
4-Eyes71
Visit this Community
Metro Manila, Philippines
Joined: December 02, 2003
KitMaker: 424 posts
Armorama: 41 posts
Posted: Wednesday, January 07, 2004 - 11:56 AM UTC
Pastel chalk (white) will do the trick. Best that you brush it on by hand. White washes are never neat so using the brush is more realistic.
ZoomieE7
Visit this Community
Texas, United States
Joined: October 17, 2002
KitMaker: 145 posts
Armorama: 0 posts
Posted: Wednesday, January 07, 2004 - 12:33 PM UTC
You might try doing a "negative" paintjob for your winter camo. That is, paint the vehicle solid white, and drybrush the OD, Panzergrau, whatever. Whitewash wore very unevenly, and drybrushing will let you control EXACTLY how much base color shows through, and where.
CptSy
Visit this Community
Quebec, Canada
Joined: December 29, 2003
KitMaker: 16 posts
Armorama: 0 posts
Posted: Thursday, January 08, 2004 - 11:09 AM UTC
Its not actually painting, but it might be something interesting in your winter diorama.

http://web135.kserver7.erfurt12.de/index_en.html?en_tip_schnee.html&1
flitzer
Visit this Community
England - North West, United Kingdom
Joined: November 13, 2003
KitMaker: 2,240 posts
Armorama: 808 posts
Posted: Saturday, January 10, 2004 - 03:41 AM UTC
I have tried with some success, poster paint '"process white" painted over the original camo scheme.
Add a little washing-up liquid to the water to help it adhere to the paint surfaces.
As it's done the same way it was done for real, it can look pretty authentic.
After painting, it can be sealed with matt varnish to protect it.
It can be brushed or air brushed with no problems.
Cheers
Peter
the_unborn
Joined: December 24, 2003
KitMaker: 126 posts
Armorama: 0 posts
Posted: Saturday, January 10, 2004 - 04:01 AM UTC
Try artist's tube water paints, i found the results very realistic, i saw that in Weathering heresies article
Envar
Visit this Community
Uusimaa, Finland
Joined: March 07, 2002
KitMaker: 1,088 posts
Armorama: 0 posts
Posted: Saturday, January 10, 2004 - 05:16 AM UTC
Fireman, check out this thread: Envarīs BT-7 Winter wash

The progress of this winter scheme is explained in the posts.
Try it out, it worked for me!

m:-)

Toni
flitzer
Visit this Community
England - North West, United Kingdom
Joined: November 13, 2003
KitMaker: 2,240 posts
Armorama: 808 posts
Posted: Saturday, January 10, 2004 - 06:06 PM UTC
Speaking of Artist's water based paints, Gouache is also good. It's similar to Water Colours but is opaque. When its thinned and applied it coats the surface but let's just enough of the camo scheme to show through.
Gouache is usually placed near all the other Artist's paints in most good art shops. Can be known as Designer's Colours.

Ta Ta
Peter :-)
fireman1208
Visit this Community
North Carolina, United States
Joined: January 03, 2004
KitMaker: 4 posts
Armorama: 0 posts
Posted: Sunday, January 11, 2004 - 03:40 AM UTC
Just an update on my progress, I have whitewashed my semi-track, added some dirty snow and mud. I plan on adding som fresh snow to the body and canopy. Ok folks, how does it look ? Anything else I need to do. Check it out im my gallery.
propboy44256
Visit this Community
Ohio, United States
Joined: November 20, 2002
KitMaker: 1,038 posts
Armorama: 454 posts
Posted: Monday, January 12, 2004 - 04:31 AM UTC
I have used white chalk ground into powder. Add a little water and brush it on...When it dries..it will turn white...Works well
MrRoo
Visit this Community
Queensland, Australia
Joined: October 07, 2002
KitMaker: 3,856 posts
Armorama: 2,984 posts
Posted: Monday, January 12, 2004 - 07:56 AM UTC
why have you left the canvas top?

how about posting these pics in rivet review board? This is just a suggestion mate.
the_unborn
Joined: December 24, 2003
KitMaker: 126 posts
Armorama: 0 posts
Posted: Monday, January 12, 2004 - 08:52 AM UTC

Quoted Text

I have used white chalk ground into powder. Add a little water and brush it on...When it dries..it will turn white...Works well


that's true, pastel chalks are amazing, they allow you to do anything on your vehicles
 _GOTOTOP