Louisiana, United States
Joined: March 06, 2010
KitMaker: 3,128 posts
Armorama: 2,959 posts
Posted: Tuesday, December 29, 2015 - 10:58 AM UTC
@John ;
THANKS!
I'll be plugging on with that big turret guy. The PE and barrel are somewhere in some shipping-container on some mega-ship slurging along across some ocean... It's like snail mail, for sure. I'm just hoping that the bits will arrive soon, as I hope to get this monster into a local model show late JAN...
Meanwhile, I pulled out those kit link-n-length tracks and put them together last weekend... I found that they cleaned up nicely and mostly went together quite well - and boy do they look just massive! I'm actually quite impressed - Trumpy did a good job on these! What's cool about the set is that the top runs are pre-sagged - a nice feature as the real things were generally saggy and loose-looking. The kit sag is not over-done, but one can deepen the dips if desired (some of the real things looked REALLY loose...). It should be noted by KV builders that the saggy top run was always accompanied by saggy and "bowed-down" sections below the idler and sprocket (when the beast was standing still) - the kit tracks assemble those areas as pretty straight and tight-looking, and these sections should be relaxed a bit to be consistent with a saggy top run.
I'll get a wip pic up soon.
Bob

#041
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Friday, January 01, 2016 - 09:33 PM UTC
I am finally getting ready to start working on my build for this campaign. The Dragon IS-2. It looks to be a straight forward build.
More to follow soon



Campaign'oholic - 252+ campaigns completed

#041
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Sunday, January 03, 2016 - 05:08 PM UTC
A little progress has been made. So far this kit looks great and goes together very well.
More to follow soon


Campaign'oholic - 252+ campaigns completed
Wisconsin, United States
Joined: July 30, 2013
KitMaker: 584 posts
Armorama: 525 posts
Posted: Saturday, January 09, 2016 - 02:06 AM UTC
Better then late then never!
Here are some progress shots, I started not too long ago, but wanted to wait until I had something of substance to post.
Like all things Zevezda, this kit has a boat load of parts, and is a very tedious build. Slow and steady on this one. I'm hoping to have this done by the deadline.






Thanks for looking!
Vietnam
Joined: May 07, 2006
KitMaker: 416 posts
Armorama: 312 posts
Posted: Saturday, January 16, 2016 - 09:06 PM UTC
Hi,
Some my progresses:


@Houle: I also have a Zvez's T-90 like you. Waiting your work.
Regards,
K.

#041
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Monday, January 18, 2016 - 09:23 AM UTC
Looks nice, mr. K. Interesting to build and weather in stages like that.
Looking forward to see more

Campaign'oholic - 252+ campaigns completed
Vietnam
Joined: May 07, 2006
KitMaker: 416 posts
Armorama: 312 posts
Posted: Tuesday, January 19, 2016 - 07:37 PM UTC
Quoted Text
Looks nice, mr. K. Interesting to build and weather in stages like that.
Looking forward to see more 
Thanks, Jesper.
I'm thinking about the base like the boxart's scene.

#041
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Tuesday, January 19, 2016 - 09:49 PM UTC
Sounds cool, mr. K. If you got the "interaction" between the tank, figures, and snow ground work right, it will look awesome.
Looking forward to see more

Campaign'oholic - 252+ campaigns completed
England - East Anglia, United Kingdom
Joined: September 18, 2014
KitMaker: 91 posts
Armorama: 91 posts
Posted: Friday, January 22, 2016 - 08:06 PM UTC
Hi all!
I hope everyone's builds are going well. I am calling my KV-1 finished after adding some soot with Humbrol weathering powders - I do not think I will use them again as they are quite large particles - and fuel stains with an AK Interactive product. It took me ages of searching, trying to work out where the fuel tanks are and where the fuel would likely be spilt

I could not find out for certain where fuel went during the refuelling procedure but decided the back engine deck would not be a silly place for some patches of spilt fuel.
Well without further ado, here are the pictures of the finished model, including the gallery shot





All best,
David

Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
Armorama: 212 posts
Posted: Saturday, January 30, 2016 - 06:14 AM UTC
Hi,
I´m going to begin this campaign with this Trumpeter KV-2,


#041
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Saturday, January 30, 2016 - 12:17 PM UTC
A little more progress on my build. Main construction is finished. Next is s base coat and then the main colors.
More to follow


Campaign'oholic - 252+ campaigns completed

#298
Hong Kong S.A.R. / 繁體
Joined: August 08, 2002
KitMaker: 1,182 posts
Armorama: 665 posts
Posted: Sunday, January 31, 2016 - 06:22 AM UTC
Just started to build my entry, Takom 1/35 Soviet Heavy Tank Object 279.
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
Armorama: 212 posts
Posted: Saturday, February 06, 2016 - 02:58 AM UTC
It look very nice that tank Lap Man
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
Armorama: 212 posts
Posted: Saturday, February 06, 2016 - 03:36 AM UTC
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
Armorama: 212 posts
Posted: Tuesday, February 09, 2016 - 12:05 AM UTC

#041
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Tuesday, February 09, 2016 - 03:29 AM UTC
A little more progress on my IS-2. The base color is on followed by mud and some sprayed on mud.
I will try to use the pictures of the Leopard 2A6 from AKInteractive's app. There are some really good pictures of mud and how it dries, spreads on the running gear etc.
More to follow soon



Campaign'oholic - 252+ campaigns completed

#298
Hong Kong S.A.R. / 繁體
Joined: August 08, 2002
KitMaker: 1,182 posts
Armorama: 665 posts
Posted: Wednesday, February 10, 2016 - 01:00 PM UTC

#041
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Wednesday, February 10, 2016 - 02:06 PM UTC
Nice progress, Lap man.
How is the figure that is included? Is it good quality?
Campaign'oholic - 252+ campaigns completed

#041
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Monday, February 15, 2016 - 10:30 AM UTC
Campaign'oholic - 252+ campaigns completed

#016
England - East Anglia, United Kingdom
Joined: March 18, 2009
KitMaker: 142 posts
Armorama: 138 posts
Posted: Tuesday, February 16, 2016 - 12:22 PM UTC
Hi guys I'm thinking of a KV2 not sure witch kit to get and would like some help if possible I'm looking for a kit with separate track links was thinking of trumpeter. I was going to have a look thought the kit reviews. Some good builds going on looking forward to getting started
Dave
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
Armorama: 212 posts
Posted: Wednesday, February 17, 2016 - 04:33 PM UTC
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
Armorama: 212 posts
Posted: Thursday, February 18, 2016 - 03:39 AM UTC

#041
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Friday, February 19, 2016 - 01:36 AM UTC
Nice progress, Daniel.
Dave, as I recall Trumpeters kit has link and length tracks. It is a good kit and great value for money.
Campaign'oholic - 252+ campaigns completed

#016
England - East Anglia, United Kingdom
Joined: March 18, 2009
KitMaker: 142 posts
Armorama: 138 posts
Posted: Friday, February 19, 2016 - 03:11 AM UTC
Quoted Text
Nice progress, Daniel.
Dave, as I recall Trumpeters kit has link and length tracks. It is a good kit and great value for money.
Thanks Jesper I was thinking of getting one there normally quite good kits
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
Armorama: 212 posts
Posted: Monday, February 22, 2016 - 06:18 AM UTC