I am going to be building bronco's
Buffalo mrap and I seem to recall
a posting with photos on the errors
on the assembly instructions how bronco got
the assembly of the front and rear whells crossed i cant seem to find it on here
Can anyone help?

Good news : here's the thread you're taking about :

https://armorama.kitmaker.net/forums/188403&ord=&page=2

Bad news : most of the related pics are gone...

H.P.

Here's my build log if it's any help. I don't recall the instructions being too faulty, but dry fit everything if you can. The suspension is very fiddly

http://forum.ipmsireland.com/topic/11292214/1/

Nick, if I recall correctly it was the Panda M-ATV that had the issues with the instructions regarding the suspension. I may be wrong in this but I found the instruction photos that had corrections done in red ink. When I compared the photos to the instructions that came with my M-ATV, Panda had corrected them. The thread on Pascal's Buffalo appears to be talking about detail Bronco left off of the model, not mistakes in the instructions. I hope this helps.

Regards,

Eric

I built the Bronco Buffalo, and don't recall any issues with the suspension. I also dry fitted prior to gluing, and remember there was not much of an issue. I left rear main arms unglued during assembly, this allowed me to ensure all wheels ended up level and on the ground.