I've got a 1/35 launcher, but want to show it firing. Does anyone make a 1/35 MILAN projectile?

AFAIK, no one does. Only possibility to build one from scratch.

Manufacturers site

http://www.mbda-systems.com/product/milan-er/

Reference photos/drawings

https://www.google.de/search?q=MILAN+missile&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjs4fjg2dHVAhXnJMAKHbHMD9MQsAQIPg&biw=1440&bih=763

Take note that the missile container is pushed back in the moment of firing.

ITALERI have a plastic model
ACCURATE ARMOUR have a resin model
i don't know the disponibility???

He need the missile itself, not the launcher.

Accurate Armour does a set of missiles with stencils.

Azimut used to have a set for the VAB Milan. I don't know if they sell the missiles separately though. Mine had a nasty molding line (probably the mold was damaged).

Olivier

Thanks guys but actually after the missile itself. I think I'll have a go at turning one...

Shouldn`t be to difficult. Only 2,9 mm diameter and 22 mm long.

Accurate Armour Accurate Armour Milan only do the vehicles, bulk & individual containers, & the launcher, but not the missile

According to Jane`s the MILAN 1 is 769 mm long and the warhead has a 103 mm diamater. The propulsion section is 115 mm in dia and the midbody 90 mm. My (empty) MILAN tube is 120mm inside.

HTH
Hans-Hermann

I guess it depends on the version...





H.P.

I've made a 3d model, without the fins, just for fun. If you'd like an .stl file, to print it on your own, let me know...

Yes please Andy - I'm unsure what to do with it but I'm sure I'll work it out... please PM me.

Sorry Ian. I read your initial post too fast.
Don't forget to show pics of your result when you print one from Andrew's file.

Olivier

Thanks to Andrey for the Stl. file. Went here and got it printed

https://www.sculpteo.com/en/

Will let you know how it works out.