Hello!

This is the beginning of my Scammell Heavy Artillery Tractor from Thunder Models and some aftermarket from Resicast.

First, the workable steering by Resicast :

DSC_0125 by Christophe Nachtergael, sur Flickr
DSC_0124 by Christophe Nachtergael, sur Flickr
DSC_0123 by Christophe Nachtergael, sur Flickr
DSC_0122 by Christophe Nachtergael, sur Flickr

Next, the engine...
A little bit updated with some 0.3mm wire.
DSC_0119 by Christophe Nachtergael, sur Flickr
DSC_0117 by Christophe Nachtergael, sur Flickr
DSC_0115 by Christophe Nachtergael, sur Flickr

And some paint and Ak products after...
DSC_0121 by Christophe Nachtergael, sur Flickr
DSC_0127 by Christophe Nachtergael, sur Flickr
DSC_0126 by Christophe Nachtergael, sur Flickr

More dust are coming on the engine...

Impressive work as usual

Thanks Robin!

The engine is a work of art!!! Will be following this.

Excellent work Christophe. Fantastic paint work on the engine.

Nice work Christophe.. that engine is stunning!!

I have to ask though, why go to Resicast for steering parts? It's easy to drill them yourself and make it all work.

http://www.armorama.co.uk/forums/263985&page=1


I will shortly be starting a double build of the R100 and the SV2S from Thundermodel and will show how I did this. I have also found a couple of small changes to the build process to make life easier which I will show.

All in all, these are great kits though eh?

Thanks all!


@ Nigel : Why buy commercial products rather than doing it yourself?

Because I'm worth it!

great work I will wachk this post .

If I may give you a tip Christophe.. before you paint the front bulkhead of the cab check the clearance over the engine. On my transporter i had to remove plastic from the top of the "tunnel" to clear the engine.

I also fitted B31 to the top of the engine before painting because the thin tube that goes up from the vacuum pump needs to be moved to fit B31.