Hi can anyone point me in direction of references, pics drawings for 2T210 TZ M transporter loader vehicle, specifically loading equipment. I have some photos but none i can take reference points off for scratching the equipment reasonably accurately.
Thanks

Steve,
That is the best I could find about 2T210:


Further-a short description of carried load(translated from Russian):
Transport-loading machine 2T210
Intended use: supply of ZSU-23-4M ammunition, reception and transport of spent cartridges and used ammunition links to combat supply points, it also carries Spare Parts Kit No. 1 of AZP-23M (3 boxes).
2T210 is based on ZIL-131 truck.The equipment is carried in the cargo bay.
Equipment consists of:
2 boxes of ammunition with 2000 cartridges in each box (2 belts with 520 cartridges and 2 belts with 480 cartridges);
1 crate for ammunition links collection;
1 box for collected ammunition links;
1 manometer(in box);
2 compressed air bottles 10-150-U, GOST 949-73;
2 ammo can openers;
1 100 l. coolant tank;
2 crates with blank ammunition loaded belts (belt with 50 blank cartridges per crate);
1 box with pyro cartridges PPL and PPM-2;
1 tray assembly;
Boxes and crates fastening equipment;
DK-4-63 set for special treatment.
The internal dimensions of 2T210(ZIL-131) cargo bay are 3600 x 2320 mm.

HTH

Some of the system components :

http://www.rwd-mb3.de/pages/2t210.htm

http://www.rwd-mb3.de/pages/2i12.htm




H.P.

Frenchy,

Your find is better than mine!
Description is punctual-as usual for German manual.
As written- the NVA used Ural-375D or IFA W50 as base vehicle, not ZIL-131.

The original TZM vehicle is Zil-157K. One ZSU-23-4 battery: 4 ZSU, 4 TZM, 2 workshop vehicle, 1 Battery Commander vehicle /BRDM-2 or FUG, late BTR-60PU-12/.
Hungarian People Army duty 22 ZSU-23-4V1 /11 V1 early, 11 late/, ZIL-157K TZM's.
I have original hungarian handbook the TZM /2T210/ digital PDF.

thanks angel, appreciated..

thanks for the links frenchy, just back from holiday so I can start modelling again.

hi juhasz. thanks for references - can I be cheeky and ask if you have notes on the actual equipment. ie. boxes magazines and feeder equipment? particularly the feeder equipment is it times 2 1 for each pair of magazines or just 1 large dual unit.
thanks again fellas

The charging vehicle pushes the ZSU 90 degrees centrally, the ZSU tower is turned 90 degrees to the left or right, inverted at 60 degrees.
The charger is equipped with the following: Steam storage box 4 pcs, Winch 2 pcs, Gear box 1 pcs, Left side strap box 1 pcs, Right side strap pile 1 pcs, Stand 1 pcs, Mounting fixing parts: Faléc 6 pcs, with pinnacle 2 pcs, Connecting heel 4 pcs, Adjustable screw mounted 2 pcs, Corner 4 pcs, Mounted upper peg 1 pcs, Mounted plate 1 pcs, Screw M12x180-051 8 pcs, Screw M12x25-051 16 pcs, Screw M8x65-051 16 pcs, Screw M8x45 -051 4 pcs, Screw M8x70-051 16 pcs, Mother M12-051 8 pcs, Mother M8-05136 pcs, Washer 00-2001 8 pcs, Washer 12-011 16 pcs, Washer 8. Guest 7735-55 36 pcs, eagle nails 3,2x32-001 16 pcs, Angle K4x100 24 pcs, spring washers 12N65G 8 pcs.
TASZT-ZIP:
Number 5 liquid filled 10 liter can 1 piece, 2A7 and AZP-23 ZIP boxes 2 pieces, Ammunition strap filling and draining device 1 pcs, Ammunition strap separating device 1 pcs, THP Cold bore 1 pcs, Regulating plate 1 pcs, Packing chest 1 pcs, Box for training straps 1 pcs, Training ammunition 100 pcs., Band member 2 JU-3 100 pcs.

Nagyon szépen köszönöm/Big THANK YOU, Gabor!

I'll make good use of these wonderfull refferencies some day,

Hi Juhasz
Brilliant, thank you !!!!!