I'm working on an old Alan kit,I decided to add some detail, so I will replace the moulded air inlet meat and replace it with wire mesh. Anyone has more info about the air inlet? It seems to have louvers inside it, I clearly see one in the attached link:

http://svsm.org/gallery/Su-76aberdeen/IMG_4793

But they may be two of them. It looks like there are no pics on available books. Further info will be really appreciated. Thanks a lot in advance. Best regards.

José

Here are some links, that I hope will be of help, Jose!
Restoration of Su-76M:
http://arergard.com/photoarhive/restavracia-tehniki/category/69-sau-su-76m

SU-76M Walkaround(12th from top to bottom on the left line)
https://www.components-and-parts.com/tanks-and-self-propelled-guns

José

This photo will help you -

http://data4.primeportal.net/tanks/daniel_fliundra/su-76/index.php?Page=1

And -

http://modelizm.forum2x2.ru/t548-topic

If the photo does not open, change ___.org to ___.cc.

Another walkaraund -
http://modelizm.forum2x2.ru/t800-topic
https://get.google.com/albumarchive/116579531675940889219/album/AF1QipOLOZRWWcddZdmcwSFVb3zaQtMvIcAy3V1KUoOz

I took photo with a tape measure -

https://yadi.sk/a/c9M1-ctl3VRPZf

Here you can also see the original grid.
Bottom air intake grid was also

Good luck to you with Alan kit!)

Oh my gosh! Nice set of pictures... Didn't know it also had screen mesh at the bottom, I thought it was a box. Thank you for the links I searched on the net for hours and didn't find anything useful. Best regards.

José