i have three different airbrush's a paasche XL, aztek 470, and a badger 200.does anyone know if you can get an adapter to run all three from the same compresser? the 470 and the badger each have a nut type connection which ins'nt too bad to swap over, but the paasche has a knurled sleeve type connection which will only fit directly to the compresser,which bypasses the regulater/moisture trap setup i have. the compresser it self has been slightly modified to accept the reg/trap, but i really could do with having the paasche connected through the reg, and then i'll have a nice little setup

Almonkey,

Take a look here http://www.obeeliks.com/en-gb/dept_35.html

You can find here al sorts of connectors for different brands of airbrushes,
you can connect to an airhose with NW 2.7 Quick couplings

cheers mate! i found an adapter on that site that will solve all my problems, you're a star! :-)

al,
try machine mart they also do a double feed off a compresser running 3 eh
you are a pervert!