Here are a couple in progress builds I am doing at the same time.

First up is the Italeri 1/35 LAV-AT. I got the kit second hand and the seller said it was complete but after going over the parts I found that a few parts were missing. Thanks to Ryan (Tank1812) for supplying the missing parts. Also thanks to Rob (18Bravo) for the resin tires. The wire cutters are from the AFV Stryker upgrade set. This will be from OIF 2003 in the NATO camo scheme.








Next up is the AFV 1/35 M1128 Stryker MGS. Thanks again to Rob (18Bravo) for the great Stryker walk around photos to help me along with this build. The DUKE antenna is also from the AFV Stryker upgrade set. I wanted to do one used in Iraq with the slat armor. There are currently no aftermarket slat armor available for the MGS version so unfortunately I will not be adding any and I am not going to attempt to scratch build it, way too complicated for me. It won't be entirely correct but close enough.

Looking good, glad the parts could help out.

Same here. Glad those wheels will go to good use finally. Looking good.

NIce work so far on the M1128. I did notice that you have the 105D antenna for the DUKE system mounted on the wrong side of the PE mount. The antenna mounts to the opposite of the triangular base.
HTH
John

Thanks again Ryan and Rob.

Thanks John!
The DUKE is only dry fitted for now but it is mounted correctly. On the M1128, the mount is flipped. I cropped these two photos and enlarged the areas and you can just make out the mount.

Well, there seems to be an exception to most things and the M1128 seems to be that exception with the 105D antenna mounts. continue with your work Sir, I will be monitoring your progress...

John

LAV-TUA requires a new cupola, kit provided is wrong.

https://www.perfect-scale.de/en/www--perfect-scale-de-3/M901--Hammerhead--Conversion.html

My guess is a clearance issue.