I started a little side project to get the courage and guts to do the big surgery on the groundworks of my PAK dio. Juul (zerocool) gave me the dimensions of the little observation bunker and I made them into a little diagram wich is shown below. The dimensions are in CM.
The whole Bunker is made in Styrofoam simply because it is light, easy to work with, Because I work with it for a couple of years and because I still have a huge supply of it. Ok up to the pics

De Bunker that is shown in the pics below was constructed in less then an hour and is completely made out of Styrofoam.
Overview

Front

and back

Ok the building stages are more or less finished now and the next stage is making the concrete of the bunker complete with the planking pattern often seen on those bunkers. This is simply done with Wallspackle. You apply it on one side of the bunker wait for 2 minutes and then you push all sorts of balsastrips on the spackle wait a bit and then pull it off what you get is these stripey things on the sides of the bunker.
Ok Up to the pics of the Spackled and planked bunker also in this stage I have added the "eyes" that they have made in the concrete roof to lift it on top of the bunker itself.



Close up of the planking pattern

First pic of the figure I want with the bunker

Ok that`s all for thge unpainted version now up to the painted version.The bunker is only sprayed in a lightgrey color and is not wetahered yet




And to close this serie off I`ll show you a digital sketch of what the dio setting will be and what kind of ambiance it needs to show

Ok people all feedback is welcome. Next steps are: Weathering, The interior of the Bunker, painting of the figure and the buildup of the groundwork.
