_GOTOBOTTOM
AFV Painting & Weathering
Answers to questions about the right paint scheme or tips for the right effect.
soaking aztec 470
godfather
Visit this Community
Canada
Joined: June 26, 2002
KitMaker: 817 posts
Armorama: 465 posts
Posted: Wednesday, February 16, 2005 - 07:30 PM UTC
Do people actualy soak their airbrush in thinner to clean the interiors? If so how long and with what? I also have an hp-c could I soak that as well? By soak I mean submerge in thinner/cleaner.
3442
Visit this Community
Quebec, Canada
Joined: March 23, 2004
KitMaker: 2,412 posts
Armorama: 1,174 posts
Posted: Thursday, February 17, 2005 - 07:48 AM UTC
not in thinner, but i have done in something called omni au cleaner, it doesnt damage the rings and prevents the paint from drying, and cleans it out a little, i then take it apart and clean the pieces individualy

personaly, i spray thinner inside after i finished then put it in the omni when i know i wont be cleaning my badger 150 right away. keeps it clean and fonctioning

Frank
Teacher
Visit this Community
England - North West, United Kingdom
Joined: April 05, 2003
KitMaker: 4,924 posts
Armorama: 3,679 posts
Posted: Thursday, February 17, 2005 - 08:16 AM UTC
The 470 can be totally dis-assembled without damage. I do mine every couple of weeks. just rememebr how it goes back together again! If you try it, and run into difficulties, PM me and I'll send some pics.

Vinnie
panic
Visit this Community
Bayern, Germany
Joined: February 13, 2005
KitMaker: 43 posts
Armorama: 35 posts
Posted: Thursday, February 17, 2005 - 08:36 AM UTC

Quoted Text

Do people actualy soak their airbrush in thinner to clean the interiors?


Maybe? But I do not!

According to Aztek the only parts which are resistant to any kind of thinner are those parts which get in contact with color by normal use. Thus i.e. the reverse flow method of cleaning could damage your airbrush, because thinner could get into the region where usually the air comes out. This was supposed to kill my first and my second A470. Turpentine which i regulary use for cleaning melted sensitive plastic parts of the air control valve far back in the airbrush body. Nowadays I use to clean the airbrush by simply spraying thinner, turpentine, xylene, isopropyl alcohol, acetone or what ever is needed through, disassemble the nozzle and drown the nozzle in a jar with universal thinner or an appropriate one. The nozzle resists this treatment .
But please do not drown the complete airbrush body!
You could loose your lifetime warranty!

Stefan
PvtParts
Visit this Community
New Jersey, United States
Joined: June 18, 2003
KitMaker: 1,876 posts
Armorama: 1,120 posts
Posted: Thursday, February 17, 2005 - 08:58 AM UTC
I agree with Panic and was told by testors not to submerge the brush body.
HastyP
Visit this Community
Ontario, Canada
Joined: April 23, 2003
KitMaker: 1,117 posts
Armorama: 468 posts
Posted: Friday, February 18, 2005 - 11:33 PM UTC
Try this site, good Aztek 470 cleaning tips.

http://www.rlm.at/start_e.htm?cont/thema06_e.htm&1

HastyP
procrazzy
Visit this Community
England - South East, United Kingdom
Joined: November 28, 2004
KitMaker: 359 posts
Armorama: 0 posts
Posted: Saturday, February 19, 2005 - 04:40 AM UTC
What is nitro thinner?

cheers

Philip
panic
Visit this Community
Bayern, Germany
Joined: February 13, 2005
KitMaker: 43 posts
Armorama: 35 posts
Posted: Monday, February 21, 2005 - 10:24 AM UTC
Hi,

Nitro thinner is thought for laquer paints based on a mixture of nitrocellulose, synthetic resins and softener . It is as many thinners an mixtures of different organic solvents.
It is also used as an universal thinner for many non water based paints.

Stefan
 _GOTOTOP