Hi Guys Im anovice Never owned a realAir Brush except a cheap Humbrol which has the spay pattern of a M.G.42. Its ok for a overall base coat but thats it . Could anyone advise on a good workhorse that will allow me to do camo on armour and is easy to get along with. also is a compressor a must ive only used cans so far , looking forward to hearing from you all.

Personal experience says passche and Badger, but others swear by Aztek and Iwata. A good Pasche starts around $50 (US). A full Aztek kit can be had for about $90 (US). A dual action (the trigger controls air flow and paint volume) is the better choice. A compressor really is a must. Though realtively expensive, it is a one time, long term investment. I don't know what would be available to match your electrical system, however.

ThanksLt. I had alook around the web and founda dealer offering Paasche H, or F for a reasonable price. they also had these Brushes with a compressor for £145.00 about $200.00. Thanks once again,Looks like my christmas present is sorted out.

Hi Easy ............
.........I can honestly recommend the Iwata Eclipse series
of airbrushes. Their what I use exclusively.
I have the HP-BCS ( bottom -feed ) and HP-CS ( gravity feed ). which are both double-action AB's. I plan on getting the HP-SBS also.
I use them with the Campbell/Hausfeld FP2003 Compressor/Air-tank.
In my opinion, you can't get a better airbrush for the money. Passche and Badger
also make good reliable AB's.
Some modeler's might tell you to start off with a single-action AB, but I think
it's a bunch of baloney. I started with a double-action( DA ) and I took to it immediately.
You will be able to do a lot more with a DA, especially when it come's to very fine
detail and camouflage in any scale.
The Iwata Eclipse series allow you do spray "hairline" to 1and 2 inch wide pattern's, and
all this without having to change the needle ...............That's right ......one needle does
it all. And you can get very, very fine lines at low or high psi.
Performance — The Eclipse performs with a smooth, responsive trigger which results in controllable fine lines and wide background spray. Its cut-away handle allows for easy access to the needle for flushing the tip and less down time. Paints move effortlessly through the Eclipse, producing a flawless spray pattern. Difficult to spray mediums like enamels, textile colors, thinned acrylics, automotive paints, and ceramic glazes are handled with ease by the Eclipse.
Versatility — One size needle and cone-shaped fluid tip is all that is required for the Eclipse. One size does it all. From fine lines to large backgrounds and thin to heavy paints. Even stippling patterns can be achieved by simply removing the air cap. No need to change heads, one head does it all. Also, all major brands of airbrush jars and jar adaptors are compatible with the Eclipse, so there is no need to replace those dozens of jars you already own. The Eclipse does it all!
Reliability — The Eclipse is machined with the finest grade materials for the closest tolerances, insuring that each part fits and works perfectly. The self-centering fluid tip and hardened stainless steel needle seat together precisely for a secure, long lasting fit. Two internal bushing sites behind the trigger allow the needle to stay centered throughout the airbrush, resulting in perfect alignment of internal working parts and long-standing durability. A tough, triple chrome-plated exterior is impervious to most solvents. Each model is individually hand tested before shipping, guaranteeing consistent, reliable results. The same company that developed the Custom Micron Series gives the Eclipse a distinguished quality that is synonymous with the name Iwata.

I can guarantee you that you will find the Iwata's a high quality airbrush, and one that
you will love using. They are EXCELLENT.
You can get the HP-BCS for $74 and the HP-CS for $89 (at BearAir ) . - And they will last a lifetime if properly cared for and maintained. Here are Iwata's Website & BearAir
MORE RECOMMENDATION'S HERE AT ARMORAMA
https://armorama.kitmaker.net/forums/3245&page=1

IWATA AIRBRUSH WEBSITE
http://www.iwataairbrush.com/
BEARAIR
http://www.bearair.com/

- ralph

Hi Steve. many thanks for your reply, no stones unturned there, I must admit i have never really looked at Iwata I thought they might be a bit advanced for me but I will take a look at them They seem to do everything I would need. Many Thanks. Bye the way I am a real fan of the Screaming Eagles,since watching Band of Brothers on the Telly,Those guys had it tough, much respect.