I am not sure this is the correct forum to submit this question in but I am looking for a website that sells Badger AB accessories. Specifically I need the tips and needles for the Anthem 155 model. Thanks is advance everyone.

Start here:

http://www.badger-airbrush.com/155parts.htm

http://www.hobby-airbrushes.com/en-us/dept_139.html

http://www.hobby-airbrushes.com/en-us/dept_140.html

HTH

Try here, too: http://www.dixieart.com/

Also, I know they sell Badger needles at the Michael's here. You could try one near you as well.

Nic

Thanks Guys. Very appreciated.

Ok folks, I found some good sites, with the help of my fellow armoraniacs, that sell what I am looking for, but the other question I pose to those who know more than I is.....

....do I have to buy a separate needle for the fine, medium and heavy tips that go with the Badger 155 Anthem? Are there different needle sizes that I should be aware of or are all the needles interchangeable? Is there a set that I can buy for each size (Fn, Med, Hvy)?

Thanks in advance.

From what I understand of the Anthem is you use only one needle/nozzle combination. There's no need to change the needle nor nozzles for differing size spray patterns because it's fully adjustable on the AB.

Thanks Ken, Let me check on that and do a little more research.

I have a similar question in regards to the Paasche VL/VLS. What tip numbers provide the finest detail ? In the instructions, they aren't real clear on which ones do what. I would like to purchase some spares "just in case".

Mike, the smaller the number the finer the spray. #1 tip = very fine, # 3 = medium, #5 = large.

That's what I thought, thanks for the confirmation. Now, do I have to change the needles ? They all look the same

Mike, yes, you do need to change the needles if you change the tips. Looks can be deceiving, you may not be able to notice it but, each needle is of a different diameter. The breakdown for each of the tip/needle combinations is as follows:

VL(S)#1 Spray Pattern 1/64"- 1" Light Fluids
VL(S)#3 Spray Pattern 1/32"- 1 1/4" Medium Fluids
VL(S)#5 Spray Pattern 1/16"- 1 1/2" Heavy Fluids