Anyone know of a good online source for 1/35th scale PE german vehicle number stencils? I found a set from Stencilit on line but can't find a US vendor. I would prefer to shop with a site sponsor if that is possible.
Thanks in advance.
Shaun
Hosted by Darren Baker
German AFV number stencils needed

keenan

Joined: October 16, 2002
KitMaker: 5,272 posts
Armorama: 2,844 posts

Posted: Tuesday, May 24, 2005 - 12:57 AM UTC

slodder

Joined: February 22, 2002
KitMaker: 11,718 posts
Armorama: 7,138 posts

Posted: Tuesday, May 24, 2005 - 01:08 AM UTC
There is a vendor on ebay that routinely has stencils.
I thinks its aa_models or aamodels
I thinks its aa_models or aamodels

ex-royal

Joined: May 03, 2003
KitMaker: 1,009 posts
Armorama: 0 posts
Posted: Tuesday, May 24, 2005 - 01:32 AM UTC
Hi Shaun,
Janic Dube at Panzer World carries the Eduard Mask Line Here
in Canada and he is a great guy If its not in stock he will get for you very quickly. Also his prices are the best I have seen, and your US dollar will buy you more here as well. Give him a shout at [email protected]
Hope this helps.
Cheers,
Bryan
Janic Dube at Panzer World carries the Eduard Mask Line Here
in Canada and he is a great guy If its not in stock he will get for you very quickly. Also his prices are the best I have seen, and your US dollar will buy you more here as well. Give him a shout at [email protected]
Hope this helps.
Cheers,
Bryan

keenan

Joined: October 16, 2002
KitMaker: 5,272 posts
Armorama: 2,844 posts

Posted: Tuesday, May 24, 2005 - 01:44 AM UTC
Thanks Scott & Bryan.
I found the Ebay web store and he has the German cross stencils in brass. The Eduard masks are vinyl. I had terrible luck with the set I bought for my Tammy Pershing. I am hoping to get brass so I can reuse them.
Still looking and thanks for the help!
Shaun
I found the Ebay web store and he has the German cross stencils in brass. The Eduard masks are vinyl. I had terrible luck with the set I bought for my Tammy Pershing. I am hoping to get brass so I can reuse them.
Still looking and thanks for the help!
Shaun

Kelley

Joined: November 21, 2002
KitMaker: 1,966 posts
Armorama: 1,635 posts

Posted: Tuesday, May 24, 2005 - 02:46 AM UTC
Hi Shaun, check out R & J at the following link, they carry the Stencilit line.
http://www.rjproducts.com
HTH,
Mike
http://www.rjproducts.com
HTH,
Mike

Parks20

Joined: December 18, 2004
KitMaker: 737 posts
Armorama: 0 posts
Posted: Tuesday, May 24, 2005 - 03:06 AM UTC
Check Verlinden, they make both cross, and number stencils.

keenan

Joined: October 16, 2002
KitMaker: 5,272 posts
Armorama: 2,844 posts

Posted: Tuesday, May 24, 2005 - 03:08 AM UTC
My Visa card and I thnk you Kelly.
Shaun
Good thing the wife is at work...
Shaun
Good thing the wife is at work...

Graugrun

Joined: May 03, 2005
KitMaker: 125 posts
Armorama: 59 posts

Posted: Tuesday, May 24, 2005 - 03:15 AM UTC
Shaun, a different angle but have you checked out MIG's superb dry transfers?
I tried stencils before and theycan be extemely tricky to use. The dry transfers were a pleasure!
Just an idea....
Regards,
Graugrun
I tried stencils before and theycan be extemely tricky to use. The dry transfers were a pleasure!
Just an idea....
Regards,
Graugrun


keenan

Joined: October 16, 2002
KitMaker: 5,272 posts
Armorama: 2,844 posts

Posted: Tuesday, May 24, 2005 - 03:34 AM UTC
Graugrun,
I need to get crosses and number over some pretty roung zimmerit. I don't think dry transfers or decals are going to work very well.
Thanks though.
Shaun
UPDATE:
Ordered the brass stencils from R&J, along with some Zim-It-Rite and the new DML 88. Man it turns out it was a good thing the wife was at work...
I need to get crosses and number over some pretty roung zimmerit. I don't think dry transfers or decals are going to work very well.
Thanks though.
Shaun
UPDATE:
Ordered the brass stencils from R&J, along with some Zim-It-Rite and the new DML 88. Man it turns out it was a good thing the wife was at work...
Posted: Tuesday, May 24, 2005 - 06:17 AM UTC
Quoted Text
UPDATE:
Ordered the brass stencils from R&J, along with some Zim-It-Rite and the new DML 88. Man it turns out it was a good thing the wife was at work...
That will make no difference she's working now when she is home when the mailman delivers the package....










keenan

Joined: October 16, 2002
KitMaker: 5,272 posts
Armorama: 2,844 posts

Posted: Tuesday, May 24, 2005 - 07:29 AM UTC
It's not the package that worries me. It is the Mastercard statement...
:-) :-) :-)
Shaun
:-) :-) :-)
Shaun
![]() |