i understand that the HP-C can accomodate a different needle than it's stock one so as to allow it to spray .2mm lines. What I need to know is what else has to be changed on the AB to accomodate this needle?

Hey GF, if you have the standard HP-C (the non Plus model), you cannot convert to 0.2mm.
If you do have the HP-C Plus, you only need to change the nozzle.

Just be sure to double check with an authorized dealer for part number for you particular model.

Hi, Kencelot, You can help me. For the Iwata HP-BS plus model, I don´t know if it is possible to put another size to the needle, because by default is 0.2 mm , but I don´t know if I can to change it?

Thanks

Hi, anyone can help me? thanks.

According to http://www.arttalk.com/iwata/hp-c.htm the HP-C is convertable

The Parts are listed @ Dixie Art as optional too
url]http://www.dixieart.com/IwataPartsListHP.html[/url]

Miguel,

http://www.arttalk.com/iwata/hp-bs.htm

Thanks Matt, Let me see. My airbrush is the Iwata HP-BS plus. I suppose the BS simple is similar or not?
Thanks

I don't see a HP-BS plus but i do see a HP-SB plus listed
http://www.arttalk.com/iwata/iwatapromo.htm#IWATA%20HP-SBPlus

Thank you very much Matt for the information. I see the model I suppose that the 0.3 mm needle is possible to install. Thanks