A newbie's question so hopefully it's in the right place.
What's the best technique for painting paint chips on armour: I'm thinking either a very small brush or a toothpick and what are the best colours to use?
Thanks
AFV Painting & Weathering
Answers to questions about the right paint scheme or tips for the right effect.
Answers to questions about the right paint scheme or tips for the right effect.
Hosted by Darren Baker, Matthew Toms
Paint Chips
Richard_E
England - East Anglia, United Kingdom
Joined: January 06, 2003
KitMaker: 52 posts
Armorama: 39 posts
Joined: January 06, 2003
KitMaker: 52 posts
Armorama: 39 posts
Posted: Tuesday, May 02, 2006 - 04:05 AM UTC
18Bravo
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Tuesday, May 02, 2006 - 05:34 AM UTC
There's a wide variety of techniques you'll find have been discussed on here, and can do a key word search.
The ones most people are familiar with:
Salt Method
Rubber Mask
Painting Them On
Using An Artist's Pencil
Using Graphite
30 year old model RR trick-paint rust underneath, scratch new paint off with a wire before it fully dries.
Similar trick-paint rust underneath. Paint main color and let it cure. Hit model with sandpaper-great for softskins and car models.
And my own accidental discovery from about ten years ago-hot thinner.
Colors vary depending on the age of the rust, from a bright orange, to a brown, to an almost black.
The ones most people are familiar with:
Salt Method
Rubber Mask
Painting Them On
Using An Artist's Pencil
Using Graphite
30 year old model RR trick-paint rust underneath, scratch new paint off with a wire before it fully dries.
Similar trick-paint rust underneath. Paint main color and let it cure. Hit model with sandpaper-great for softskins and car models.
And my own accidental discovery from about ten years ago-hot thinner.
Colors vary depending on the age of the rust, from a bright orange, to a brown, to an almost black.
irish
Pennsylvania, United States
Joined: October 21, 2005
KitMaker: 170 posts
Armorama: 146 posts
Joined: October 21, 2005
KitMaker: 170 posts
Armorama: 146 posts
Posted: Tuesday, May 02, 2006 - 06:38 AM UTC
I have attempted to model paint chips using several techniques:
1. Hand paint with an 18/0 brush
2. Sponge
3. Masking solution
I personally think the hand painted chips give the most realistic effect, but it takes a little practice. A good explanation of using the sponge technique can be found in "Modelling the IS Heavy Tank"-Osprey Publishing, Author- Nicola Cortese, ISBN- 1-841767573. MIG Jimenez's Book- FAQ gives a great explanation for the hand painted techniques among other things. In my opinion, his models are the best I've seen.
irish
1. Hand paint with an 18/0 brush
2. Sponge
3. Masking solution
I personally think the hand painted chips give the most realistic effect, but it takes a little practice. A good explanation of using the sponge technique can be found in "Modelling the IS Heavy Tank"-Osprey Publishing, Author- Nicola Cortese, ISBN- 1-841767573. MIG Jimenez's Book- FAQ gives a great explanation for the hand painted techniques among other things. In my opinion, his models are the best I've seen.
irish