_GOTOBOTTOM
AFV Painting & Weathering
Answers to questions about the right paint scheme or tips for the right effect.
aztek nozzles
goatmonkey
Visit this Community
Connecticut, United States
Joined: June 10, 2005
KitMaker: 34 posts
Armorama: 0 posts
Posted: Saturday, May 13, 2006 - 03:51 AM UTC
i don't want to start anything here. i know some people like the aztek and some people think it's evil incarnate. i don't want to argue one way or the other, i just happen to use the thing. that said, here's the question...

for those that know the nozzles well, what exactly is the difference between the nozzles? i know that there's the large/small nozzles, the plastic/metal needles and the spatter nozzle is in a category of it's own. what exactly does the metal needle give you vs the plastic? how is the 'acrylic' nozzles different from those not designated as acrylic?

i mostly use acrylic so i usually end up using the red nozzle for things like camo, orange for general base coat coverage and yellow for clear-coat. i'll also use the tan metal-needled nozzle to sray ink for preshading. would anyone like to suggest a different strategy?

any input would be appreciated. thanks in advance!
viper29_ca
Visit this Community
New Brunswick, Canada
Joined: October 18, 2002
KitMaker: 2,247 posts
Armorama: 1,138 posts
Posted: Saturday, May 13, 2006 - 05:19 AM UTC
Hey there Paul,

Although I really can answer your questions as to what tip is used for what paint, but I personally use the tan nozzel for my fine work, whether I am using acrylic or enamel paint, and usually use the grey one for general coverage stuff.

I do know that the tan nozzle will give you the finest line of the bunch...and I have had mine down as fine as a pencil line(mind you there is alot of playing around with the correct paint to thinner ratio, air pressure and distance from the model), but it can be done.
Mojo
Visit this Community
Ontario, Canada
Joined: January 11, 2003
KitMaker: 1,339 posts
Armorama: 637 posts
Posted: Saturday, May 13, 2006 - 04:40 PM UTC
Hey Paul,
I use the tan nozzle for just about everything I paint.. I use acrylics exclusively now. Adjusting ratios and pressures depending on what I want....I have played round with the other tips, and found that for the most part, they will give you a different width of pattern. I have sparyed enamls through an acrylic nozzle and had no difference..Just a pain in the [auto-censored] to clean... Hope it helps..


Dave
capnjock
Visit this Community
United States
Joined: May 19, 2003
KitMaker: 860 posts
Armorama: 411 posts
Posted: Sunday, May 14, 2006 - 07:00 PM UTC
I use the black nozzle as it doesn't seem to clog up as fast for me as the gray or tan nozzles do. I use acrylic only. I know that there is a list somewhere that explains the differences of all the nozzles. Hope it helps
capnjock
jlmurc
Visit this Community
England - East Anglia, United Kingdom
Joined: August 29, 2005
KitMaker: 1,267 posts
Armorama: 969 posts
Posted: Sunday, May 14, 2006 - 07:39 PM UTC
If it would help, some time ago I made up an identification sheet for the different spray heads. PM you email and I will send it.

John
BoogalooJ
Visit this Community
Ontario, Canada
Joined: July 18, 2005
KitMaker: 230 posts
Armorama: 105 posts
Posted: Sunday, May 14, 2006 - 08:31 PM UTC
I found this site online. It seems to have all the info you need.
http://homepage.mac.com/srogers4/hobbies/models/airbrush/nozzles.html

Jamie
Halfyank
Visit this Community
Colorado, United States
Joined: February 01, 2003
KitMaker: 5,221 posts
Armorama: 1,245 posts
Posted: Sunday, May 14, 2006 - 10:07 PM UTC
I personally have found that I don't get good results using any of the other nozzles for my Aztek brush, except the black and white ones. I only spray acrylics. I'm not sure of exactly why this is, but I know that's what I've found. Between the white and the black the white does seem to put out a lot more paint, in a wider spray, while the black one seems to be able to do a finer line.

 _GOTOTOP