Does anyone own a Paasche H model AB? If so, do they like it? I can't seem to get mine to paint fine lines without splatter and now the adjustment nozzle on the needle is so loose that it turns when I am using it! I know that I am thinning my paint and have set the pressure correctly. I am thinking about getting another AB instead of buying replacement parts for it but I want some of your suggestions before I decide what to do. I have read on a thread that cheaper AB's needle are made with poor material so the paint clogs up quicker on the tip of the needle. Is this model of Paasche considered cheap?==)

Thanks,
Aaron C.

IF you refer9ing to this one:


i have it and id works just fine, i drawed lines up to 3mm thin (just play more practice with pressure/thining)

i agree its not perfect but if you want perfection, dont use a middle class AB, buy some beast

Mirko

I never had issues with the H model I had...
Is the needle itself Bent? or is the Nozzle cracked?
Is the hole in the bottle cap plugging?

Although the H is pretty inexpensive it is still one of the better single action external mix airbrushes available. I have one along with some "high end" Iwatas but I often go back to the Paasche because it performs well and is easy to clean.

What type of paint are you using and what air pressure do you usually use? Also, what tip are you using? I have seen some really fine lines using the #1 tip, 10-12 psi air pressure and well thinned paint.

With regards to loose nozzle, try using a small amount of teflon tape on the threads. You should only be able to turn the needle by hand so it sounds like there must be excess wear. Try the tape trick until you can find a replacement needle/nozzle.