_GOTOBOTTOM
Armor/AFV
For discussions on tanks, artillery, jeeps, etc.
REVIEW
French Farm Gate
Henk
Visit this Community
England - South West, United Kingdom
Joined: August 07, 2004
KitMaker: 6,391 posts
Armorama: 4,258 posts
Posted: Thursday, November 16, 2006 - 11:07 PM UTC
This French Farm Gate from MiniArt needs a little bit of work, but the result will be more than worth it. And the inclusion of a beautifull sheet of scale posters makes this a bargain.



French Farm Gate

If you have comments or questions please post them here.

Thanks!
HONEYCUT
Visit this Community
Victoria, Australia
Joined: May 07, 2003
KitMaker: 4,002 posts
Armorama: 2,947 posts
Posted: Saturday, November 18, 2006 - 08:02 AM UTC

This looks to open up good diorama possibilities...
I like the door within a gate look
As good as the posters appear (for other projects maybe) what are their relevance to a farm? Would it be common to see them plastered over the rough walls?
Cheers
Brad
Henk
Visit this Community
England - South West, United Kingdom
Joined: August 07, 2004
KitMaker: 6,391 posts
Armorama: 4,258 posts
Posted: Saturday, November 18, 2006 - 05:42 PM UTC
Hi Brad,

The posters are a typical MiniArt offering, as in that they always include a large number of different posters with all their building kits. Usualy in two different languages, i.e. the language of the occupied country and German ones. The movie and advertising ones are probably less relevant for this subject, but the Germans would not have had any qualms about slapping their propaganda poster where ever they would be seen.
Besides, despite MiniArt's tendencie to give their kits very specific names, this kit could also be used in a village scene, etc.
The posters can of course be used for any other building as well.


Cheers
Henk
Plasticbattle
#003
Visit this Community
Donegal, Ireland
Joined: May 14, 2002
KitMaker: 9,763 posts
Armorama: 7,444 posts
Posted: Sunday, November 19, 2006 - 02:41 AM UTC
Good review Henk. Miniart must be congratulated for always giving something a little extra. All those extra pieces are a goldmine for dio builders.
A tip for those weak corners, where the plastic is "see-through" thin or actauly a hole, is to stuff the back of it with milliput, allowing some to come through and fill outside as well. Its better to do this before assembly as these may give way during painting or handling. When the milliput dries, sand it back to the original shape again on the outside, and the excess on the inside gives needed strength. This will be invisible after painting. I did this on the Ukranian house and it works well.





 _GOTOTOP