i need to paint bricks on a verlinden diorama kit for the first time. I was wondering if anyone had a good red brick colour chart, or reference or whatever that would help me out. Or just a list of colours from any model paint manufacturer that i could use, that other modellers use
thanks!!
-Brett
AFV Painting & Weathering
Answers to questions about the right paint scheme or tips for the right effect.
Answers to questions about the right paint scheme or tips for the right effect.
Hosted by Darren Baker, Matthew Toms
Red brick colours?
brearc
Ontario, Canada
Joined: November 06, 2006
KitMaker: 12 posts
Armorama: 8 posts
Joined: November 06, 2006
KitMaker: 12 posts
Armorama: 8 posts
Posted: Sunday, December 10, 2006 - 07:36 AM UTC
MTDriver
England - East Midlands, United Kingdom
Joined: April 01, 2006
KitMaker: 119 posts
Armorama: 38 posts
Joined: April 01, 2006
KitMaker: 119 posts
Armorama: 38 posts
Posted: Sunday, December 10, 2006 - 01:01 PM UTC
Hi Brett,I have just painted a brick signal box for a friend,and used LifeColor LC32 Matt Rust 1.I then added yellow and red to pick out individual bricks.After this I overcoated the lot with Tamiya X-26 Clear Orange that gave it a nice hue and glossed it at the same time in preperation for the washes and filters.These are acrylic colours,but any rusty/light brown paints would suit,but vary individual bricks by mixing reds and yellows into the base coat.I would apply a darkish wash to the courses,I know mortar is a light colour,but the dark wash looks better and less toylike.I also applied an opaque greenish colour around the base of the walls to depict damp/moss,but do this in a subtle manner as you don't want it too stark looking.After it is all dry,apply a flat coat to dull it all down.
HTH....Dave.
HTH....Dave.
Phant3
Ohio, United States
Joined: November 28, 2006
KitMaker: 36 posts
Armorama: 29 posts
Joined: November 28, 2006
KitMaker: 36 posts
Armorama: 29 posts
Posted: Sunday, December 10, 2006 - 06:48 PM UTC
Hi Brett,
Most "red" bricks are actually a brownish red color that varies from brick to brick. I would start out with a base coat of Tamiya Hull Red XF-9, and follow with a good variety of yellow, brown, and red pastel chalks ground into a fine powder. Mixing and matching a few bricks here and a few there to get random colors. Just lightly brush the powder on where you want it with an old brush. Then for the mortar I would go with something like panzer yellow lightened up with white, and use light grey pastels again to vary it. Perhaps a few streaks of very thin dark brown oil paint streaks to add age where any metal peices may be imbedded in the wall. Finish with a light coat of Polly S flat.
Model on,
Clair
Most "red" bricks are actually a brownish red color that varies from brick to brick. I would start out with a base coat of Tamiya Hull Red XF-9, and follow with a good variety of yellow, brown, and red pastel chalks ground into a fine powder. Mixing and matching a few bricks here and a few there to get random colors. Just lightly brush the powder on where you want it with an old brush. Then for the mortar I would go with something like panzer yellow lightened up with white, and use light grey pastels again to vary it. Perhaps a few streaks of very thin dark brown oil paint streaks to add age where any metal peices may be imbedded in the wall. Finish with a light coat of Polly S flat.
Model on,
Clair
Yeti01012001
England - North West, United Kingdom
Joined: July 28, 2005
KitMaker: 360 posts
Armorama: 334 posts
Joined: July 28, 2005
KitMaker: 360 posts
Armorama: 334 posts
Posted: Sunday, December 10, 2006 - 08:29 PM UTC
B
Same as the other guys say, I used the Tamiya red hall colour and then mix it with yellows, red, oranges and paint the odd brick a different colour.
You can either use a black, white or brown oil washes for the mortar.
Here is one of my examples not the best example round, but will give you an idea
Same as the other guys say, I used the Tamiya red hall colour and then mix it with yellows, red, oranges and paint the odd brick a different colour.
You can either use a black, white or brown oil washes for the mortar.
Here is one of my examples not the best example round, but will give you an idea