The Set
This set is designed for use with Resicast’s new Universal Carrier Mk I Conversion set 35.1200 and contains enough pieces to equip 2 Mk I carriers. The stowage set is supplied with a 2 page A4 instruction sheet. On page one are 5 clear B & W pictures showing the stowage in place along with instructions on how to obtain the nose up effect and a small B & W picture of the PE fret set. On the rear are 3 clear pictures, again in B & W showing the individual items which are matched to a central listing for easy identification. If you notice in the photos, the box top and the instruction sheet show different kit numbers. Resicast should have this corrected in the near future.
contents
- Rear deck stowage No 1 x 1
- Rear deck stowage No 2 x 1
- Front deck stowage x 1
- Front spare stowage bib x 1
- Inner stowage A x 1
- Inner stowage B x 1
- Inner stowage c x 1
- Spare track x 1
- Biscuit tin x 2
- Ammo box x 2
- 3” mortar ammo box x 2
- Field cookers x 2
- Bag x 2
- Water can for side of vehicle x 2
- Suspension part A x2
- Suspension part B x 2
- Suspension part c x 2
- Suspension part D x 2
The small PE Fret contains: - Handles for POW cans x 12
- POW Holder x 2
- Number Plate x 2
- Number plate stays x 4
conclusion
Parts 1 and 2 are the large stowage pieces for the rear of the carrier. The details are crisp and clear and once the plugs are removed should required only a little clean up. All the other parts seem to be to the same high standard of moulding with no air bubbles present.
A neat addition to the set are the 2 cut down biscuit tin cookers (parts 12), which should prove useful items in any scene or dio. Also included in the kit are two sets of rear replacement suspension for the carrier, to allow modellers to achieve that nose up effect of a well loaded carrier.
Comments