Built Review
T-34/76 1942 Factory 112
T-34/76 1942 Factory 112 full interior
  • move

by: Ted Hayward [ TED_HAYWARD ]


The latest T-34 kit from AFV Club offers an alternative to those who loved the previous kit with its full interior, but didn’t care for the clear exterior. The kit offers an opaque exterior with casting and weld-bead detail in gray styrene.


The only difference between this and the first T-34/76 kit is the replacement of the clear exterior turret and hull parts with gray styrene. All other details remain the same.


The T-34/76 was simplicity itself, and construction of the kit, even with full interior detail, is straight-forward.The working suspension is the first to be built, by inserting the coil spring assemblies into their housings in the inner hull walls. One end is connected to a pin on each torsion arm, which pivots by having its shaft trapped with a cap on the inside of the hull. The whole assembly is clever and simple.

The next six steps of the instructions are devoted to building the interior of the hull. About the only omission is the centrally-located turret wiring link, positioned between the ammo bins on the hull floor - not difficult to scratch-build.
The outstanding feature of this kit is its fully-detailed V2 diesel engine/transmission assembly. Covering two pages of the instructions, building the engine/transmission compartment is a kit in itself! I was very impressed with the flywheel/cooling fan assembly. Super-detailers may want to add the twelve fuel injection lines from fine wire, and hollow-out the exhaust pipes. The engine compartment is nicely finished with a separate access hatch and cooling slats (which can be positioned in the open position).

The road wheels with their separate tires, moulded in black styrene, are next to go on, held to their axles with hubcaps. The kit-supplied vinyl tracks are extremely supple –so much so, that one must take care not to melt them with over-use of cement. That’s right, they are joined and held-down to the road wheel tops with regular cement, not CA instant or “super”, glue. Nice touches to the exterior hull include tiny separately-moulded tie-down loops and a multi-part tool box.

Decals to depict 4 vehicles –one of the Polish 1st Army (1945), are provided. They are thin and crisp.

parting shots

As a former welder, I can safely say that AFV Club has done their usual job of depicting convincing weld beads for the new exterior parts of this kit. These are subjective things, as real weld beads are human-applied, no two being identical, even if applied by the same welder, to the same vehicle, on the same day. The cast detail of the turret is convincing, but will need to be re-worked after joining the turret halves, perhaps with Mr. Surfacer or similar. The cast detail is on the exterior surfaces of the turret and hull only.

According to the definitive guide on the T-34, “Mythical Weapon” (Airconnection Publishing, by Robert Michulec), this kit measures-up very accurately to scale drawings provided.

Note: A limited number of kits also will include a print of the box art.

Follow the step-by-step build of my T-34/76 in my Build Log.
Highs: Very well detailed and complete interior, now with convincing exterior detail.
Lows: Incorrect air-cleaner configuration has not been rectified. Vinyl tracks are adequate, but I much prefer the individual, workable links.
Verdict: Answers the pleas for those who loved AFV Club's full-interior T-34 kit, without the clear exterior.
Percentage Rating
  Scale: 1:35
  Mfg. ID: AF 35143
  Suggested Retail: US 43.95
  PUBLISHED: Feb 12, 2011

Our Thanks to AFV Club!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Ted Hayward (ted_hayward)

From B.C., Canada. Living in Taiwan for past several years. I've been building kits for as long as memory serves -armor, aircraft, cars. Big fan of 1/16th scale armor kits. Currently serving as poster boy for working with CA adhesives in a well-ventilated area. My first kit was the positively awful ...

Copyright ©2021 text by Ted Hayward [ TED_HAYWARD ]. All rights reserved.


Just a small correction - the major hull welds on a T-34 were machine-welded, not done manually.
FEB 12, 2011 - 04:52 AM

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move