Built Review
Heer Shoulder Boards- Panzer
Heer Shoulder Boards for Panzer troops
  • move

by: Bill Cross [ BILL_C ]


Military markings are a distinct, important and characteristic way of distinguishing branches of service, rank and function within these exceedingly hierarchical organizations.

In other words, how can you know how to tell the Sergeant from the Major, other than just saluting everything except fire plugs?

The challenge for modelers in 1/35th scale is rendering these markings clearly. Painting them on is entirely impossible, at least for mere mortals. And with most of us accumulating stashes that will last several lifetimes of kitbuilding, why bother? Decals unfortunately are a nightmare because they're so difficult to get small items like patches cut closely-enough to avoid silvering, or to locate them on the tiny surfaces of 1/35th figures.

Archer Fine Transfers has come to our rescue with their uniform markings series. For an Elefant crew build I recently completed, they frankly made the difference between ho-hum and spectacular.

In the case of the Wehrmacht, soldiers wore a combination of shoulder "boards" (really thick fabric loops), collar tabs and various insignia on their cloth caps (helmets had different emblems on their sides). The insignia evolved over the course of the war, and the Waffen SS and Luftwaffe had separate insignia from the Heer ("army"). Archer has both sets of Early War and Late War markings for most branches of Wehrmacht units.

To finish my Elefant crew, I needed both the shoulder boards and uniform patch sets (also reviewed by me here) that included the cap cockades and Wehrmacht eagle insignia. Each figure would have shoulder boards, deaths head Panzerwaffe collar tabs and either the small cockade (a dot, really) or the Reichscockade with surrounding wreath.

what you get

As with most all of Archer's other transfers, the set is packaged in a glassine envelope that includes:

1 sheet of dry transfers with 96 shoulder boards (enough for 48 figures)
a guide for which boards go with which ranks
a small piece of wet transfer paper

the review

Every once in awhile, I have a "come to Jesus" moment in this hobby that makes everything I knew before seem irrelevant, when everything suddenly seems so much easier and difficult problems of realism are solved.

This is one of those moments.

I simply can't find words to say how great these transfers are-- and what a difference they make to my figure building.

The transfers themselves are superbly-printed, as if 1-1 shoulder boards had been shrunk down to 1/35th. The application method with Archer's wet transfer paper makes applying the them easier than water-slide decals. And the results are so realistic, it's almost scary (see my lame photos at right).

Surprisingly, even veteran modelers are nervous about using dry transfers. And with items this tiny, I can understand why. But Archer actually discourages using these uniform patches dry, recommending instead the wet transfer paper (they will even send you a free sheet of WTP to try it).

The application process is surprisingly easy. I was nervous the first time, but it went so well, I can't imagine ever building another figure without these transfers. You begin by applying the dry transfer to the wet transfer paper. This is accomplished by rubbing the back of the transfer film with a #2 pencil or other dull pointed object. Make sure the transfer film lifts away from the decal before pulling up or you might tear the image.

A step-by-step illustrated tutorial is on Archer's website.

You then cut around the transfer, submerge it in warm water for 5 seconds, finally "floating" in onto the spot where you want it on the figure. A little decal setting solution helps, both in getting it to adhere and then drying it out. The transfer is so thin, it will bond with the surface as though painted-on.

Once the transfer has dried in-place, it's a good idea to overspray with a light coating of clear acrylic (very light if you're using a spirts-based clear like a lacquer).


What can I say? I'm a believer, praise Archer Fine Transfers.

Thanks to Archer Fine Transfers for providing review samples. Please mention you saw this review on Armorama when purchasing from a vendor or ordering directly from Archer.
Highs: Superb. Simply the best option for finishing 1/35th scale figures.
Lows: None. Yes, they're pricy, but perfection comes at a cost.
Verdict: Highest recommendation. You simply don't want to model Wehrmacht figures without these.
Percentage Rating
  Scale: 1:35
  Mfg. ID: FG35051A
  Suggested Retail: $12.95
  PUBLISHED: Apr 01, 2011

Our Thanks to Archer Fine Transfers!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item  |  View Vendor Homepage  |  More Reviews  

About Bill Cross (bill_c)

Self-proclaimed rivet counter who gleefully builds tanks, planes and has three subs in the stash.

Copyright 2021 text by Bill Cross [ BILL_C ]. All rights reserved.


Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move