Hey Guys,

Like I said in a previous post, I really want to improve my modelling skills, I have all the right tools now and a huge stack, now I just need the skills!

This was the first time that I tried the oil dot fading technique on AFV Clubs M5A1 Early.

Tell me what you think!

Thanks!

Dave

Dave:

Some constructive criticism. After myself still trying to perfect this technique I have ruined a lot of kits trying. What you need is two things. First, add white. This will give the faded look. Secondly, blend your colors more. Use vertical brush strokes to blend. The final advice...keep practicing. I have a kit that is for technique practice only. AFV-news.com has great videos to watch on this technique. Good luck!

Early on I used to make the mistake of oil fading over a gloss coat. All that happens is you end up moving the oil around on the surface, rather than grinding it in like dust or grime.

Try hitting the model with a matt or satin coat, then adding some thin coats of light buff. When this dries, rub with a brush very, very slighty moistened with white spirit.

Jon is correct. Over a gloss coat the oil just moves around. I prefer a matte finish.

I can't comment on your technique as I have yet to try my hand at oil fading, but I will say that I really like the effect you've created here, it's very characterful. Nice work

Hey Dave I agree on the matte finish upon which to use the oils... I have started this kit and am eager to know how it went together? Any major problems?
Oh, and you might want to straighten up the bow .30cal or add some OD under the shield...
Brad

Dave,
Your definitely going in the right direction.
If you don't want to use oils, you could use acrylics.
I place a small drop of Vallejo (70941 Burnt Umber the last time)just strait out of the bottle and dabbed on with a needle. at the angle between the deck and side and brushed it downward with a slightly damp flat brush for a similar effect. The only drawback is you can't hang around or the paint dries.
Tom