Dear fellow modelers,
I read somewhere that the Allies were hesitant to mount AT guns on lighter vehicles including the Dodge Beep 3/4 ton. So far I have only seen the 37mm AT gun mounted. Was there ever a stripped down version of the 57mm mounted on this vehicle. Given that the same chassis was used to create many versions was there possibly a 57mm AT gun mounted. I know it sounds odd but I'm considering placing my own old Tamiya 6 pounder in the rear of the Beep. Any help would be greatly appreciated. Besides it will appear to be an improvement over having the 6 pounder towed by a Universal Carrier.
Just a thought and thanks,
johncpo in windy SW New Mexico
Hosted by Darren Baker
3/4 Ton Truck mounted 57mm AT Gun
johncpo
New Mexico, United States
Joined: September 03, 2007
KitMaker: 81 posts
Armorama: 55 posts
Joined: September 03, 2007
KitMaker: 81 posts
Armorama: 55 posts
Posted: Thursday, September 13, 2012 - 02:28 AM UTC
bigmal
England - East Midlands, United Kingdom
Joined: February 21, 2011
KitMaker: 211 posts
Armorama: 176 posts
Joined: February 21, 2011
KitMaker: 211 posts
Armorama: 176 posts
Posted: Thursday, September 13, 2012 - 04:12 AM UTC
As far as i know the 6lber AT Gun was only mounted on 3 Tonners, probably due to the recoil generated when firing them, like the Bedford QL and Austin K5 and CMP`S.
Hope this helps.
Malc.
Hope this helps.
Malc.
johncpo
New Mexico, United States
Joined: September 03, 2007
KitMaker: 81 posts
Armorama: 55 posts
Joined: September 03, 2007
KitMaker: 81 posts
Armorama: 55 posts
Posted: Thursday, September 13, 2012 - 04:26 AM UTC
Thanks for the info although I have seen photos of the 37mm AT gun mounted on Jeeps, most likely the recoil was nothing like the 57 as I read it was really bad for the crew. Nothing beats a "what if?" so I'll proceed as soon as my AFV Club Beep arrives from LuckyModels.
The best,
johncpo
The best,
johncpo
pseudorealityx
Georgia, United States
Joined: January 31, 2010
KitMaker: 2,191 posts
Armorama: 1,814 posts
Joined: January 31, 2010
KitMaker: 2,191 posts
Armorama: 1,814 posts
Posted: Thursday, September 13, 2012 - 05:37 AM UTC
They did do a quick testbed using a Ford 3/4 ton chassis.
But it failed in March of 1942...
But it failed in March of 1942...
johncpo
New Mexico, United States
Joined: September 03, 2007
KitMaker: 81 posts
Armorama: 55 posts
Joined: September 03, 2007
KitMaker: 81 posts
Armorama: 55 posts
Posted: Thursday, September 13, 2012 - 05:58 AM UTC
Thanks for the photo, you're right, it would fail, back to the drawing board!
johncpo
johncpo
25PDRFG
England - East Anglia, United Kingdom
Joined: August 09, 2009
KitMaker: 187 posts
Armorama: 181 posts
Joined: August 09, 2009
KitMaker: 187 posts
Armorama: 181 posts
Posted: Thursday, September 13, 2012 - 11:46 AM UTC
Quoted Text
Also on the armourd Matador (Deacon)As far as i know the 6lber AT Gun was only mounted on 3 Tonners, probably due to the recoil generated when firing them, like the Bedford QL and Austin K5 and CMP`S.
Hope this helps.
Malc.