_GOTOBOTTOM
Campaigns
Where Armorama group builds can be discussed, organized, and updates posted.
Tank Destroyers - who started building?
Martinnnn
Visit this Community
Zuid-Holland, Netherlands
Joined: April 26, 2004
KitMaker: 5,435 posts
Armorama: 2,762 posts
Posted: Wednesday, May 04, 2005 - 03:49 AM UTC
Tank Destroyers,

Time for a first combat report. Which units started fighting already? Who has got a Tank Destroyer on it's workbench?

I'm currently busy with the calculations etc I need for the dimensions of my Archer tank destroyer. I will scratchbuilt the conversion on a Dragon Valentine hull.

So, where are you at?

Martin
DutchBird
#068
Visit this Community
Zuid-Holland, Netherlands
Joined: April 09, 2003
KitMaker: 1,144 posts
Armorama: 526 posts
Posted: Wednesday, May 04, 2005 - 04:42 AM UTC
I have not started yet... I do have a TD on my bench (a Jagdpanther) but it is headed for the Ardennes.

I am not even at the research stage, as my possible reference has not arrived yet.
Sabot
Joined: December 18, 2001
KitMaker: 12,596 posts
Armorama: 9,071 posts
Posted: Wednesday, May 04, 2005 - 04:55 AM UTC
I've got a lot done on the construction of my Hetzer.
Blade48mrd
Visit this Community
Washington, United States
Joined: September 03, 2004
KitMaker: 1,185 posts
Armorama: 810 posts
Posted: Wednesday, May 04, 2005 - 04:56 AM UTC
Martinnnn -

I've getting the hull prepped for the Cavilier "Zim" set and base coat (dunklelgelb) for my Dragon JagdPanther (Early) version. Still gathering and researching for diorama which will be an "ambush" theme in tree-line (France 1944). So just started, but anxiously getting into the theme for this Campaign.

Blade48mrd
BigBrother
Visit this Community
Michigan, United States
Joined: April 01, 2005
KitMaker: 88 posts
Armorama: 0 posts
Posted: Wednesday, May 04, 2005 - 04:59 AM UTC

The DML 1/35th Ferdinand is on the table...I can hear the engine idling in the box, but no gluing has comenced yet. Build will be OTB! (IT WILL IT WILL) so it should go OK. Gotta finish other campaigns first....... (No Pressure)
SpiritsEye
Visit this Community
Singapore / 新加坡
Joined: May 09, 2004
KitMaker: 1,041 posts
Armorama: 533 posts
Posted: Wednesday, May 04, 2005 - 05:03 AM UTC
I've already started on Academy's Hellcat

Delbert
#073
Visit this Community
Pennsylvania, United States
Joined: October 05, 2002
KitMaker: 2,659 posts
Armorama: 1,512 posts
Posted: Wednesday, May 04, 2005 - 05:13 AM UTC
I've got a little work done on the Academy M10 GMC... cleaned up the running gear.... painted most of it and the roadwheels.....starting a bit on the interier......

Holding the battle line at the moment.. will prob start to advance deeper into enemy lines later this week..

Vadster
Visit this Community
Tennessee, United States
Joined: June 28, 2004
KitMaker: 987 posts
Armorama: 444 posts
Posted: Wednesday, May 04, 2005 - 05:28 AM UTC
I have about 3/4 of one side of tracks assembled for my Jagdpanzer and that's it! :-)

So again, I would like to know (sorry Sabot, I'm stupid) where should onep sot their - in progress- stuff? DRAGONWAGON posted is in this forum. I had had asked this question previously (here's where you come in, Sabot) about where to post these & well I was still left wondering which forum to post them in? Here is the thread I am referring to:

https://armorama.kitmaker.net/forums/50108&page=1

Martinnnn
Visit this Community
Zuid-Holland, Netherlands
Joined: April 26, 2004
KitMaker: 5,435 posts
Armorama: 2,762 posts
Posted: Wednesday, May 04, 2005 - 05:35 AM UTC
Good good sounds like we've made a good start!

Carry on!

Martin
Martinnnn
Visit this Community
Zuid-Holland, Netherlands
Joined: April 26, 2004
KitMaker: 5,435 posts
Armorama: 2,762 posts
Posted: Wednesday, May 04, 2005 - 05:47 AM UTC

Quoted Text

I have about 3/4 of one side of tracks assembled for my Jagdpanzer and that's it! :-)

So again, I would like to know (sorry Sabot, I'm stupid) where should onep sot their - in progress- stuff? DRAGONWAGON posted is in this forum. I had had asked this question previously (here's where you come in, Sabot) about where to post these & well I was still left wondering which forum to post them in? Here is the thread I am referring to:

https://armorama.kitmaker.net/forums/50108&page=1




I always post my in-progress pics in the Campaign Command forum. I've never used a gallery for that, only for finished stuff!

Martin
INDIA11A
Visit this Community
Ontario, Canada
Joined: January 09, 2005
KitMaker: 577 posts
Armorama: 446 posts
Posted: Wednesday, May 04, 2005 - 05:50 AM UTC
Just enlisted, Started on an Italeri M36B1. Working on turret and suspension. 'Gunner" "500, Reference lone tree Panther, Hyper AP" "On, Ready" "FIRE!" "TGT DESTROYED"
Martinnnn
Visit this Community
Zuid-Holland, Netherlands
Joined: April 26, 2004
KitMaker: 5,435 posts
Armorama: 2,762 posts
Posted: Wednesday, May 04, 2005 - 05:55 AM UTC

Quoted Text

Just enlisted, Started on an Italeri M36B1. Working on turret and suspension. 'Gunner" "500, Reference lone tree Panther, Hyper AP" "On, Ready" "FIRE!" "TGT DESTROYED"



Great shot soldiers! Keep going!

out
thebear
Visit this Community
Quebec, Canada
Joined: November 15, 2002
KitMaker: 3,960 posts
Armorama: 3,579 posts
Posted: Wednesday, May 04, 2005 - 06:43 AM UTC
Well I haven't signed up for this build yet but I've got all the wheels sanded and most of the drivers compartment ready to be painted on My AFV Club 251/22 ...
I'm starting to wonder about this kit a bit ...They make you drill two holes in the floor but never add anything to these holes ...They don't tell you to add the MP 40 and ammo racks to the drivers side ..(I assume it was there anyway) They tell you to mount the radio antennae but don't tell you where to put the radio..(I don't think it would be left at the co-drivers station since there is no one there on this model ...I might just rotate it so it is at least facing the driver...) Help!. I'm sure they must have moved the spare armor-proof glass somewhere else ,but they don,t tell you to add them...They don't warn you that you should remove the molded on lips for placing pieces on other 251 models on the inside of the fighting compartment sidewalls. I'm building this kit out of the box ..well as close as I possibly can for me ..

Rick
DRAGONWAGON
Visit this Community
Noord-Brabant, Netherlands
Joined: February 05, 2003
KitMaker: 1,041 posts
Armorama: 501 posts
Posted: Wednesday, May 04, 2005 - 09:48 AM UTC
Hi Martin,

Check my posting earlier this day....
Yes, I've started!!!

Cheers, John.
GunTruck
Visit this Community
California, United States
Joined: December 01, 2001
KitMaker: 5,885 posts
Armorama: 3,799 posts
Posted: Wednesday, May 04, 2005 - 09:56 AM UTC
Even though I'm up to my neck in projects - I started on time too!

Photos to follow soon...

Gunnie
05Sultan
#037
Visit this Community
California, United States
Joined: December 19, 2004
KitMaker: 2,870 posts
Armorama: 1,458 posts
Posted: Wednesday, May 04, 2005 - 10:02 AM UTC
Some bits for the M36B1 are still trickling in,gotta dig out the crew and support figs to rough 'em in.Dio base/scene getting a clearer vision.Caffeine Up!Adrenaline Up!Clear the decks for action and beat to quarters,if you will,Mr. Smithers.........
Red4
Visit this Community
California, United States
Joined: April 01, 2002
KitMaker: 4,287 posts
Armorama: 1,867 posts
Posted: Wednesday, May 04, 2005 - 10:05 AM UTC
The Tamiya M10 is progessing rapidly. I will have more than enough time to get some more started and finished as well. Pak40, and SU100. Gotta go. Targets are popping up fast. Q-out.
3442
Visit this Community
Quebec, Canada
Joined: March 23, 2004
KitMaker: 2,412 posts
Armorama: 1,174 posts
Posted: Wednesday, May 04, 2005 - 10:35 AM UTC
procrastinating isnt only somethign iam good at in school ive jsut need to finish my little vignette

Frank
Diablo
Visit this Community
Gelderland, Netherlands
Joined: February 01, 2004
KitMaker: 1,699 posts
Armorama: 433 posts
Posted: Wednesday, May 04, 2005 - 11:01 AM UTC
still going strong,with the jagdpanther.where can i post construction pics??? still not clear to me .i need to know.and what i also need to know is if the side armor skirts/plates are a must or an option,i have seen pics of them but there not in the box..or is it an early/late kind of thing.i can make the 1944 or the 1945 type it says so in the manual,have no clue on this one.............................thanks in advance.
warthog
Visit this Community
Metro Manila, Philippines
Joined: July 29, 2002
KitMaker: 1,460 posts
Armorama: 1,080 posts
Posted: Wednesday, May 04, 2005 - 12:12 PM UTC
I already finished putting on the zimm for my Elefant as well as the suspension and other minor details. I'm leaving the roadwheels and tracks last because I plan to build a dio about a damages elefant....

Cheers
keenan
Visit this Community
Indiana, United States
Joined: October 16, 2002
KitMaker: 5,272 posts
Armorama: 2,844 posts
Posted: Wednesday, May 04, 2005 - 01:16 PM UTC
Yeah, I started...
Building the Italeri RSO w/pak... Man, I should have starting the gap filling with small appliances instead of green putty. The lower hull was bad enough but the insides of the wooden sides all have ejector pin marks. If I wanted to sand off and rescribe detail I would be building winged things...
FIDO, I guess...

Shaun
Grumpyoldman
Staff MemberConsigliere
KITMAKER NETWORK
Visit this Community
Florida, United States
Joined: October 17, 2003
KitMaker: 15,338 posts
Armorama: 7,297 posts
Posted: Wednesday, May 04, 2005 - 06:16 PM UTC
Shaun and I are doing the same kit.....
GEE..... Haven't gotten as far as he has, I'm still filling and sanding the lower hull........
Hopefully you'll keep me informed of all the problems you run into, saving me the fun of discovery..... :-) :-) :-)
Angela
Visit this Community
Visayas, Philippines
Joined: September 01, 2004
KitMaker: 853 posts
Armorama: 514 posts
Posted: Wednesday, May 04, 2005 - 06:40 PM UTC
Starting on my Nashorn's hull, especially the lower parts where modifications and detailing are not necessary. I decided to leave off scratchbuilding the interior for now.

Haven't touched the AM parts yet given by Blade48mrd and Defcon yet.

Angela
Littorio
Visit this Community
England - South East, United Kingdom
Joined: September 15, 2004
KitMaker: 4,728 posts
Armorama: 504 posts
Posted: Wednesday, May 04, 2005 - 06:59 PM UTC
Started on my AFV Club Achilles IIc, hull interior completed working on the boggies. This is one nice build (so far).
My other campaigns have hit the back shelf as I'm now refinding the pleasure of building armour after a long break of building just aircraft.

Can anyone tell me what clothing Canadian tank destroyer crew would be wearing in 1945, and what figures are suitable out there?

Ciao
dogload
Visit this Community
England - North East, United Kingdom
Joined: November 03, 2004
KitMaker: 585 posts
Armorama: 0 posts
Posted: Wednesday, May 04, 2005 - 07:06 PM UTC
I've started sorting out the running gear from an Academy M10, though I don't know yet whether it is going to end up on the M10, the duckbill or if I'll dive into an AFV Achilles... hmmm... definitely an M10 of some kind going to be happening sometime though!
MC
 _GOTOTOP