¹⁄72

Dan Taylor Modelworls has informed Armorama of two upgrade releases for the S-Model A13 Cruiser Mk III they have released.

Dan Taylor Modelworls have been producing a nice series of products in 1/72nd scale with their figure releases being the items that have caught my attention the most. The latest couple of releases from Dan Taylor Modelworls are for the S-Model A13, Cruiser Mk III in the form of a detail set for the turret and a new set of running gear. Below is the text provided by Dan Taylor Modelworls

C-76082 ‘A13 Running Gear’. The set provides etched brass walls for the hull sides with the suspension slots so that the model may be depicted on rough ground. The wheels and track are provided as resin replacements - the track is link-and-length and the drive and idler wheels have track pre-fitted.

C-76083 ‘Cruiser Mk III Upgrade Kit’. Our set enhances the kit using a mix of etched brass and resin parts. Brass has been used to create turret side faces with full rivet detail. This includes the support bracket for the smoke dischargers which can be built without the dischargers installed. There is also the side, front and rear detail on the air filters, dust guards, licence plate, bow plate, driver's vision slots (for the compartment sides) and a full driver's hatch designed to be built open. In resin you get eight lifting eyes, two fire extinguishers, two smoke dischargers, a gunner's periscope, and the odd little triangle things that fit inside the front track guards. Not shown here, but provided in the kit, is a pair of loader's hatches so it can be displayed open.
Both sets come with fully illustrated instruction sheets.

C-76082 - A13 Running Gear - £7.50
C-76083 - Cruiser Mk III Upgrade Kit - £7.50