1⁄35
Wednesday, May 27, 2015 - 02:39 AM UTC
The Leopard Workshop announces some exciting news when it comes to gun barrel replacement!
The Leopard Workshop releases new barrel replacements for the Tamiya & Revell Leopard 2A5 and 2A6 kits with their LW018T & LW018R Leopard 2A5/2A6 Gun Barrels.
Designed to be a straight fit to replace the existing kit parts, there are three alternative fume extractors are provided with different textures. Check your references against the model you are building.
Instructions
Remove the casting gates CAREFULLY. The fume extractor has a small hole at the front which needs to be drilled out to 3.2 mm. Drill this from the INSIDE/the rear. The rear has a wider opening to fit the kit mount.
Carefully align the parts. There is a small amount of play in the fume extractor to help you with this.
The sight on the collimator goes on the right side, not the top.
Parts list:
Collimators
• 2A5 (part 5)
• 2A6 (part 6)
Barrels
• for 2A5 (part L44)
• for 2A6 (part L55)
• Fume extractors
• Smooth finish (part D)
• Fine fibreglass texture (part E)
• Rough fibreglass texture (part F)
• Barrel base (part T)
MSRP - €15.00 / $16.30 +shipping
Designed to be a straight fit to replace the existing kit parts, there are three alternative fume extractors are provided with different textures. Check your references against the model you are building.
Instructions
Remove the casting gates CAREFULLY. The fume extractor has a small hole at the front which needs to be drilled out to 3.2 mm. Drill this from the INSIDE/the rear. The rear has a wider opening to fit the kit mount.
Carefully align the parts. There is a small amount of play in the fume extractor to help you with this.
The sight on the collimator goes on the right side, not the top.
Parts list:
Collimators
• 2A5 (part 5)
• 2A6 (part 6)
Barrels
• for 2A5 (part L44)
• for 2A6 (part L55)
• Fume extractors
• Smooth finish (part D)
• Fine fibreglass texture (part E)
• Rough fibreglass texture (part F)
• Barrel base (part T)
MSRP - €15.00 / $16.30 +shipping
Click Star to Rate
2 readers have rated this story.
THIS STORY HAS BEEN READ 7,280 TIMES.
Leopard Workshop Reviews | MORE |
Fahrschulpanzer by kenneth oestergaard | |
Leoaprd 2A4 L44 Barrel by Jason Bobrowich | of 1 ratings, 100% found this helpful | |
Leopard 2A4 Barrel by Jason Bobrowich | of 1 ratings, 100% found this helpful | |
Leopard 1 L7 Barrel by Jason Bobrowich | of 1 ratings, 100% found this helpful | |
Leopard 1 L7 Gun Barrel by Jason Bobrowich | of 1 ratings, 100% found this helpful | |
Leopard L7 Barrel by Jason Bobrowich | of 1 ratings, 100% found this helpful | |
Leopard 2 replacement wheels by kenneth oestergaard | |
Leopard 1 Upgrades by kenneth oestergaard | |
Leopard 2 Road Wheels & Idlers by kenneth oestergaard | |
Leopard road wheels by kenneth oestergaard | |
Leopard 2 Mantlet Plugs by Jason Bobrowich | of 1 ratings, 100% found this helpful | |
Leopard 1 Mantlet Plugs by Jason Bobrowich | of 1 ratings, 100% found this helpful | |
Leopard 1 Road Wheels by Jason Bobrowich | of 1 ratings, 100% found this helpful | |
Danish Leopard 1A5DK UN Decals by Jason Bobrowich | of 1 ratings, 100% found this helpful | |
Danish Leopard 1A5DK1 Decals by Jason Bobrowich | of 1 ratings, 100% found this helpful |
Comments