Friday, August 14, 2020 - 10:11 PM UTC
Rafhart presents the new versions of his bending tool for photoetch parts.
These tools have been designed by a modeller using his experience with other models to improve the functionality and ergonomics.
The largest one is the V3, it is non-symmetrical, has 10 teeth, and a lot of space to work.
Its main features are:
- Base dimensions: 193mm x 100 mm
- Tighten the screws on the springs
- Bending the teeth 10, including one at 45 degrees horizontally
- Possibility of reverse mounting of the upper red part
- 173 mm straight bending lines
- Made of aluminium
V5 has been created for bending small and medium details from photo-etched sheets. Despite its small size, it allows bending on a straight line of 50mm, has 10 teeth. It is designed with modellers of 1/144, 1/72 and 1/48 scale in mind, but it will be appreciated by everyone with limited space on their workbench
Features of the V5:
- Base dimensions: 70mm x 58 mm
- Tighten the screws on the springs
- Bending the teeth 10,
- Possibility of reverse mounting of the upper red part in 4 positions
- 50 mm straight bending lines
- Made of aluminium
The largest one is the V3, it is non-symmetrical, has 10 teeth, and a lot of space to work.
Its main features are:
- Base dimensions: 193mm x 100 mm
- Tighten the screws on the springs
- Bending the teeth 10, including one at 45 degrees horizontally
- Possibility of reverse mounting of the upper red part
- 173 mm straight bending lines
- Made of aluminium
V5 has been created for bending small and medium details from photo-etched sheets. Despite its small size, it allows bending on a straight line of 50mm, has 10 teeth. It is designed with modellers of 1/144, 1/72 and 1/48 scale in mind, but it will be appreciated by everyone with limited space on their workbench
Features of the V5:
- Base dimensions: 70mm x 58 mm
- Tighten the screws on the springs
- Bending the teeth 10,
- Possibility of reverse mounting of the upper red part in 4 positions
- 50 mm straight bending lines
- Made of aluminium
Click Star to Rate
4 readers have rated this story.
THIS STORY HAS BEEN READ 2,585 TIMES.
Comments