The MIG Productions set I received for review is quite unusual, as it allows a modeler to... destroy a tank. Not a real tank of course but a model one. Obviously anyone can destroy a model tank - there are many ways to do that, using a hammer is just one of them. MIG set allows modeler to build a model of burned out T-55 tank. Again - you can burn your Tamiya kit, without buying any resin parts. But would it look like a model of burned out tank? No. It would just look like a burned out model of a tank (assuming that you put the flame out before the model turns into a piece of unrecognizable charred and melted plastic) and this is not the same! With MIG Productions set you can easily turn the beautiful, highly accurate and expensive Tamiya T-55 kit into a model of completely burned out wreck. Tempting, isn't it?...
The set comes in a cardboard box with a photo of finished model, built and painted by Miguel Jimenez himself. Inside a box we get instruction sheet with several more photos of Miguel's excellent T-55, which are a great reference for painting and detailing the model. On the box we find information that the set contains the engine parts licensed from Calibre35 company. But what we get in the kit is not the same product as the one that can be bought from Calibre35 - engine parts were modified, so now they show engine damaged by fire, not an operational unit. All cream resin parts in the MIG set are packed in three zip-bags and the box is filled with styrofoam chips to protect them from damage. Small instruction sheet is printed on a high quality smooth paper in full color. On one side of it are mentioned photos of finished model and on the other side are photos of unpainted resin parts attached to Tamiya model with numbers allowing for easy identification of each shown part.
The set is comprised of 35 resin parts and 20 of them are burned road wheels without tires. Next seven parts make up an engine compartment with damaged powerpack inside and compartment covers. We also get four oil and fuel tanks, all bent and deformed by heat. There is also damaged searchlight without a glass lens provided. Last three parts are gun mantlet without dirt cover, the internal support part for it, and finally a gun barrel without a fume extractor. Gun mantlet parts may be familiar to some modelers, as they are available from MIG separately as the set number MP35-050.
Using all parts from the MIG set in one model would mean building one really COMPLETELY burned out tank. All 10 double road wheels without tires and gun barrel without fume extractor mean that the tank was in the middle of the true inferno! This means that it would probably be a good idea to use parts from MIG set to build two models - not so entirely destroyed, but looking more consistent with what can be seen on photos of T-55 tanks destroyed in Iraq. That would mean buying two Tamiya's excellent T-55 models with the intent to turn them into wrecks... I think it takes a special kind of modeler to do that! ;-)
Resin parts are very well molded. Only on wheel parts I found numerous air bubbles and flash. Most air bubbles should be easy to fill and the rest should be simple to hide with heavy weathering, which is required in this case to make the model look realistic. Flash in the wheels is almost inevitable in this kind of resin parts and it is easy to remove. Fuel tank part have very thin weld lines / rims around them and these delicate strips of resin were partially separated from main resin parts in a few places. I didn't have any problems however to fix this by liberal application of thin super glue along the rim. Most parts in the set should be quite easy to separate from resin pouring blocks, but there are some parts with could cause some problems. For example engine compartment top cover is cast on a thin resin film, which has to be sanded off. There is also one other small part on the same film, which has to be freed from it by sanding. Compartment walls and floor part is molded with a lot of excess resin on the bottom and there is also no other way to get rid of it but sanding.
Unfortunately I do not have Tamiya T-55 kit (yet?...), so I was not able to test fit resin parts to the kit.
FINAL VERDICT
The only problem I see with this MIG Productions set is that you need to sacrifice Tamiya T-55 model to use it. For some modelers it can be too difficult (both financially and emotionally) to buy this excellent and expensive kit and then turn it into a wreck. Of course once finished and properly weathered such model can be a centerpiece of a diorama and in many aspects be more interesting than many "operating conditions" tank models. So if you are ready to use Tamiya T-55 to build a replica of destroyed tank, you won't find a better product than MIG Productions set to help you achieve this goal. Recommended!
Many thanks to MIG Productions for the review sample!
