Thursday, November 14, 2013 - 06:03 AM UTC
RP Toolz has taken note of the comments passed on their previous punch and die set that was reviewed on Armorama and made some improvements. That is not all as there is an all new punch and die set and a roller tool.
RP Toolz has made some changes to their punch and die set to make its use and reliability better. Not content with that they have also released an hexagonal punch and die set and a roller tool as well. The original punch and die set was designed to allow the easy manufacture of rivet heads and I use it on any scrap plastic sheet that I have and then keep the rivet heads in small containers marked up with the size ready for easy use. The new punch and die set is for replicating bolt heads in 6 sizes. The roller is of course for creating tubes or curved bends in photo etched parts.
Punch & Die tool set
Hexagonal Punch & Die tool set
The new Roller tool
Punch & Die tool set
Hexagonal Punch & Die tool set
The new Roller tool
Click Star to Rate
2 readers have rated this story.
THIS STORY HAS BEEN READ 6,785 TIMES.
RP Toolz Reviews | MORE |
Mitre Cutter by Mario Matijasic | |
Scale Leaf Cutters by Darren Baker | |
Rivets Maker by Neil Gardiner | |
Punch and Die Set by Darren Baker | |
New 13cm PE Bender by Darren Baker | of 4 ratings, 100% found this helpful | |
13cm Photo Etch Bender by James Bella | of 6 ratings, 100% found this helpful | |
Grab Handle Bender by Darren Baker | of 3 ratings, 100% found this helpful | |
Photo Etch Benders by Darren Baker | of 8 ratings, 100% found this helpful |
Comments