1⁄16
Saturday, May 07, 2016 - 12:30 PM UTC
After releasing the M-ATV in 1/16 scale, Trumpeter is now adding info and images of their next large scale modern offering.
Navistar's MaxxPro is a Mine-Resistant Ambush Protected (MRAP) armoured fighting vehicle. Designed to endure improvised explosive device (IED) attacks and ambushes, MaxxPro can withstand ballistic arms fire and mine blasts. Navistar has delivered more than 9,000 MaxxPro vehicles.
The MaxxPro vehicle incorporates the design of a crew capsule with a V-shaped hull, which is mounted on the Navistar International model 7000 chassis. The purpose of the V-hull is to deflect the blast of either a land mine or an IED away from the vehicle. The incorporation of such a design has enabled MaxxPro to survive a 7kg (15lb) land mine blast without any injuries. The vehicle can use standardised and readily available parts to ensure rapid repair and maintenance. The armoured body of the vehicle is bolted together and not welded, which facilitates on-field repairs.
Item No 00931
Item Name US MaxxPro MRAP
Bar Code 9580208009315
Scale 1:16
Item Type Plastic Model Armor Kit
Model Brief Length: 433。6mm Width:198mm
Total Parts 240+
Metal Parts pins , shaft , hinge , screw
Photo Etched Parts 1 piece
Film Parts n/a
Resin Parts n/a
Total Sprues 10 sprues , upper hull , chassis , frame and tires
Released Date 2016-04
More Features
>the kit consists of over 240 parts
>the kit w/refined detail
>multi-slide moulded hull
>Full interior details
>rubber tires
>Photo-eteched parts included
The MaxxPro vehicle incorporates the design of a crew capsule with a V-shaped hull, which is mounted on the Navistar International model 7000 chassis. The purpose of the V-hull is to deflect the blast of either a land mine or an IED away from the vehicle. The incorporation of such a design has enabled MaxxPro to survive a 7kg (15lb) land mine blast without any injuries. The vehicle can use standardised and readily available parts to ensure rapid repair and maintenance. The armoured body of the vehicle is bolted together and not welded, which facilitates on-field repairs.
Item No 00931
Item Name US MaxxPro MRAP
Bar Code 9580208009315
Scale 1:16
Item Type Plastic Model Armor Kit
Model Brief Length: 433。6mm Width:198mm
Total Parts 240+
Metal Parts pins , shaft , hinge , screw
Photo Etched Parts 1 piece
Film Parts n/a
Resin Parts n/a
Total Sprues 10 sprues , upper hull , chassis , frame and tires
Released Date 2016-04
More Features
>the kit consists of over 240 parts
>the kit w/refined detail
>multi-slide moulded hull
>Full interior details
>rubber tires
>Photo-eteched parts included
Click Star to Rate
5 readers have rated this story.
THIS STORY HAS BEEN READ 8,954 TIMES.
Trumpeter Reviews | MORE |
Object 292 by Marcel Drgon | |
B4 Model 1931 203mm Howitzer by Sebastian Schoof | |
T-72B1 MBT by Sebastian Schoof | |
Grille 30 Bar by Gavin Turner | |
Trumpeter AT-T Prime Mover by Sebastian Schoof | of 1 ratings, 100% found this helpful | |
SU 101 SPA by Sebastian Schoof | |
PLA Tank Crew by Jacques Duquette | |
KV-8S by Sebastian Schoof | |
Russian T-62 BDD Mod by Sebastian Schoof | |
Red Army with Winter Gear by Gareth McGorman | of 1 ratings, 100% found this helpful | |
KV-220 by Sebastian Schoof | |
Soviet T-64AV by Sebastian Schoof | |
BMP-3 by Sebastian Schoof | |
Soviet KV-8 by Sebastian Schoof | |
Soviet Object 268 by Jim Starkweather |
Comments