Tuesday, March 23, 2010 - 10:30 PM UTC
Yes there are a fair few in DML's 'Stable', however, an Initial production one, IMO, can only be a good thing.
6600 - Tiger I Initial Production, s.Pz.Abt.502, Leningrad Region 1942/43
Looking at the poster there does appear to have been quite a lot of improvemnts and additions to this model. At the side, edited images of the Poster...
Company Listed Features:
- Newly tooled Pz.Kpfw.VI Ausf.E w/authentic detail
- New tooled Pz.III stowage bin
- Newly tooled hull bottom w/correct drains and hatches for Initial Tigers
- Newly tooled DS tracks w/open guide horns; three lengths included to model either standard or 'mirrored' tracks
- New s.Pz.Abt.502 markings presented by Tiger I specialist David Byrden
- New layout of on-vehicle tools on upper hull
- Track toolbox is newly designed
- Unique side stowage bins and reversed pistol port for s.Pz.Abt.502 Tactical No."100"
- Photo-etched strap on the Gen2 helmet for hanging on the turret handle
- Accurate welded joint at turret chin
- Hull hatches w/interior detail and optional periscope hoods
- Photo-etched mesh screen on top of the engine deck
- One-piece molded cupola w/vision slits
- Clear direct-vision blocks
- Hatch w/interior details
- Screw holes in gun sleeve
- Mantlets w/limits stops and optional rain guard for s.Pz.Abt.502 Tactical No."100"
- Lucky horseshoe for s.Pz.Abt.502 Tactical No."100"
- Interior hull components: fuel tanks, radiators, fans
- Extreme attention to detail correctly replicates the curved cross-section design of the air cooling grills
- Accurate detail of exhaust extension for Tiger I initial Tactical Nos."3", "100" and "123"
- Retooled rear panel w/full Initial Tiger tool stowage
- Improved detail on muffler sealing valves
- Loader's hatch w/interior details
- Barrel recoils as in real firing
- Driver's vision port can be built open/closed
- Spare links for 'mirrored' tracks
- Accurately sized spare track holders
- Detailed full MG w/mounting frame ammunition bag and telescope
- Optional dust cover
- Omitting the front wheel exposes a highly detailed hub
- Accurately detailed slide molded muzzle brake
Looking at the poster there does appear to have been quite a lot of improvemnts and additions to this model. At the side, edited images of the Poster...
Company Listed Features:
- Newly tooled Pz.Kpfw.VI Ausf.E w/authentic detail
- New tooled Pz.III stowage bin
- Newly tooled hull bottom w/correct drains and hatches for Initial Tigers
- Newly tooled DS tracks w/open guide horns; three lengths included to model either standard or 'mirrored' tracks
- New s.Pz.Abt.502 markings presented by Tiger I specialist David Byrden
- New layout of on-vehicle tools on upper hull
- Track toolbox is newly designed
- Unique side stowage bins and reversed pistol port for s.Pz.Abt.502 Tactical No."100"
- Photo-etched strap on the Gen2 helmet for hanging on the turret handle
- Accurate welded joint at turret chin
- Hull hatches w/interior detail and optional periscope hoods
- Photo-etched mesh screen on top of the engine deck
- One-piece molded cupola w/vision slits
- Clear direct-vision blocks
- Hatch w/interior details
- Screw holes in gun sleeve
- Mantlets w/limits stops and optional rain guard for s.Pz.Abt.502 Tactical No."100"
- Lucky horseshoe for s.Pz.Abt.502 Tactical No."100"
- Interior hull components: fuel tanks, radiators, fans
- Extreme attention to detail correctly replicates the curved cross-section design of the air cooling grills
- Accurate detail of exhaust extension for Tiger I initial Tactical Nos."3", "100" and "123"
- Retooled rear panel w/full Initial Tiger tool stowage
- Improved detail on muffler sealing valves
- Loader's hatch w/interior details
- Barrel recoils as in real firing
- Driver's vision port can be built open/closed
- Spare links for 'mirrored' tracks
- Accurately sized spare track holders
- Detailed full MG w/mounting frame ammunition bag and telescope
- Optional dust cover
- Omitting the front wheel exposes a highly detailed hub
- Accurately detailed slide molded muzzle brake
Click Star to Rate
2 readers have rated this story.
THIS STORY HAS BEEN READ 17,065 TIMES.
Dragon Models Reviews | MORE |
Panzer IV Ausf G. by Cody K | |
Bergepanther mit Aufgesetztem by Andrew Jerome | |
IJA Type 97 by Russ Amott | |
M3 Halftrack by Pete Becerra | of 2 ratings, 100% found this helpful | |
Sd.Kfz 251/1D by Jesse | |
IDF Magach 3 w/ ERA by Sebastian Schoof | |
StuG.III Ausf.F by Matthew Lenton | |
M67A2 by Federico Collada | |
King Tiger with Zimmerit 1/35t by Karl Flavell | |
Sdkfz 250/4 mit zwilling MG34 by Karl Flavell | |
M752 LANCE Missile Launcher by Jon Arnold | |
Sd.Kfz 250/7 by DJ Judge | |
T54E1 Build by Shawn | of 1 ratings, 100% found this helpful | |
Vollkettenaufklärer 38(t) by Talal Mashtoub | |
Jagdpanzer IV A-0 by Adam Mann |
Comments