Thursday, June 09, 2011 - 08:02 PM UTC
Echelon have announced a second set of 1/35th Scale decals for the Matilda in Australian service.
ALT352020 - Australian Matildas (Part 2)
Second installment of Australian Matildas covering a number guntanks and close support tanks of 1st Australian Tank Battalion which saw operating in New Guinea.
Differing Arms of Service (AOS) and unit markings in terms of size, pattern & style. As usual, you'll be seeing crocodiles facing both ways. Unique and colourful personalised artworks are just some of the highlights of this set. Not to mention another few versions of fording markings (italicised and non-italicised) that cannot be found on other Matilda sets. All faithfully capture down to each detail.
This set covers 10 marking options total. If modellers choose to mask and colour the red fording lines, there should be markings enough for all 10 tanks.
Still available is ALT352019 - Australian Matildas (Part 1)
This covers the a number of versions, ranging from normal guntanks and close support tanks to "frogs" and a dozer fitted tank. This set covers mainly three specific units: 1st & 2/9th Australian Armoured Regiment and 2/1st Australian Armoured Brigade Reconnaissance Squadron.
For these, and MANY more subjects, check out: Echelon 's Website (LINK)
Please mention Armorama when contacting Retailers!
Second installment of Australian Matildas covering a number guntanks and close support tanks of 1st Australian Tank Battalion which saw operating in New Guinea.
Differing Arms of Service (AOS) and unit markings in terms of size, pattern & style. As usual, you'll be seeing crocodiles facing both ways. Unique and colourful personalised artworks are just some of the highlights of this set. Not to mention another few versions of fording markings (italicised and non-italicised) that cannot be found on other Matilda sets. All faithfully capture down to each detail.
This set covers 10 marking options total. If modellers choose to mask and colour the red fording lines, there should be markings enough for all 10 tanks.
Still available is ALT352019 - Australian Matildas (Part 1)
This covers the a number of versions, ranging from normal guntanks and close support tanks to "frogs" and a dozer fitted tank. This set covers mainly three specific units: 1st & 2/9th Australian Armoured Regiment and 2/1st Australian Armoured Brigade Reconnaissance Squadron.
For these, and MANY more subjects, check out: Echelon 's Website (LINK)
Please mention Armorama when contacting Retailers!
Click Star to Rate
No one has rated this yet.
THIS STORY HAS BEEN READ 6,781 TIMES.
Echelon Reviews | MORE |
Aussie Abrams Decals by Carmen Manning | of 3 ratings, 67% found this helpful | |
Danish Leopard 1A5DK Decals by Jason Bobrowich | of 3 ratings, 100% found this helpful | |
Panther Ausf D and A Markings by Scott Espin | of 4 ratings, 100% found this helpful | |
Canadian Leopard C2A1 MEXAS by Jason Bobrowich | of 6 ratings, 100% found this helpful | |
UNIFIL French Leclerc T6 by Jason Bobrowich | of 3 ratings, 100% found this helpful | |
Royal Wiltshire Yeomanry Sherman IIIs (Syria 1943) by Jim Rae | |
MCD enhancement set (for USMC M1A1HC models) by Pawel Krupowicz | of 1 ratings, 100% found this helpful | |
LECLERC Series 2 RT5 & T6 decals by Pawel Krupowicz | of 1 ratings, 100% found this helpful | |
OIF US Army M1A1HC Abrams decals Part 4 by Pawel Krupowicz | of 1 ratings, 100% found this helpful | |
US Army 3rd ID M1A1HA tank decals (OIF) - Part 2 by Pawel Krupowicz | |
US Army 3rd ID M1A1HA tank decals (OIF) - Part 3 by Pawel Krupowicz | |
US Army 3rd ID M1A1HA Abrams - 1-64 Armor - Part 3 by Pete Becerra | |
US Army 3rd ID M1A1HA Abrams - 1-64 Armor - Part 2 by Pete Becerra | |
US Army & USMC Patches, Insignias, and Ranks by Pete Becerra | of 1 ratings, 100% found this helpful | |
Swedish Strv.122 tank decal sets by Pawel Krupowicz | of 1 ratings, 100% found this helpful |
Comments