Not much choice there!!

Out of your selection, personally I would go for Italian, Belgian or Norwegian, also Dachs or Biber. Also personally, I am very glad you are considering joning us.

To run down those who have already joined, these are they in order of volunteering:

1 Kimmo Happonen “Thudius’ - Gepard
2 Bob Wiber ‘bwiber’ - 1A4/A4 or 1A2?
3 Eric Rains ‘errains’ - C2 MEXAS
4 Tom Cromwell ‘barkingdigger’ - 1A2 tractor or Fahrschulpanzer?
5 Kevin Brant ’SgtRam’ - C2
6 Andrew Harris ‘Konigwolf’ - AS1
7 Chris Johnson ‘ ChrisJohnson’ - C2
8 Eric Broderik ‘Cannuk 100a’ - C1 MEXAS
9 Cristian ‘Armoured 76’ - Biber, 1A4 or 1A5 (1.72)
10 Christian Maheu ‘ rotek’ - C1
11 Graham Holmes ‘zedhol’ - C2 with ARV engine pull
12 Todd Hall ‘ PanzerGeek’ - C1
13 Jim Carswell ‘junglejim’ - C2 OPFOR
14 Sune Hojlund Pedersen ‘DKeu8726’ - Gepard
15 John ‘Mechaman’ - C1 Pink Panther
16 Michael Shackleton ‘mshackleton’ - 1A5DK UN
17 Richard Pearce ‘maxim37’ - 1A4
18 Cam Barker ‘Cam’ - C1 or C2
19 Jason Bobrowich ‘LeoCmdr’ - to be decided

I am brand new to Modern armor and Amor modeling in General have only built 1 kit. But I just got a Italeri 1A4 I would like to make Canadian version if possible. and would like to join this Campaign.

Any news on the approval status? I'm itching to start

Sorry no. We're all itching to start but the Campaign Manager hasn't been in touch despite emails to him to ask about progress. Someone told me it can two weeks or more! We're half way there:-)

Thanks! I'll then continue scratching my itching fingers with the Scud kit I'm building for the 500+ campaign

I hope this gets through soon and gets a close start date.

There is one thing I would like to ask....I have a Meng Leopard 1A3/A4...it is about 60% done before I could finish it, I met with an accident and broke my right hand and bruised my ribs a few months ago.....now I am back and I would like to finish up what I have stop....and I would like to join this campaign...thanks

Wow lots of Leopard interest great,Think Mr Bobrowich should make a black recce Leopard,So many projects Jason.

Hi, new to this campaign thing but if it gets going I would like to enter.Not sure which Leopard yet, I have one or two to choose from

Kenny - Message just sent. Should be OK if i can have a look at your model:-)

David - welcome and glad to see you here.

Michael,

Doing some research for photos on the proposed builds and found a set for a build I had started years ago, right after I got your 3 volume set on the Leopard 1. If it isn't to far along I thought I would like to see if I can complete it for this campaign.

The kit used is the old Tamiya one, I know, but it was the one I had on hand at the time. However, with all the changes needed to be made to create the BARV I don't think it is to bad of a choice.

This is the state of the kit at this time....



The side grates are filled with superglue and sanded smooth...



Probably need a week to figure out what all the scribbles mean on the hull, etc. I never remember what I was thinking, sometimes I am not to sure I was.



I do remember that the air ducting was a lot of fun.... in a odd sort of way.

Anyway, I am guessing that this isn't more than 20-25% completed, so should fit within the proposed 50%+/-

Later,
Bob

Bob - you have to finish this whether you enter this or not!! If you do decide to enter it, it will be very welcome. Something completely different:-)

You can always enter more than one model. I just made up that rule!!

But only if he shares measurements & plans, so I can build one too! Beautiful work, Bob - can't wait to see it in full glory.

Gee guys...... no pressure here is there?

I would love to share the drawings, but there aren't really anything that you would call drawings. I did a lot of measuring points on photos and setting up proportional dividers to do the measurements so that I could layout the parts. However, I need to go through the paper stack that is in the box to see how much of that remains. Will share anything I have....

Bob

Hi guys
I have now moved this Campaign to the Campaigns Forum - which is probably where it should have been in the first place!

This is the new link: http://armorama.kitmaker.net/forums/240842&page=1

Please can you all join this thread from now on? I have listed everyone who has shown interest so I hope that the Armorama Campaign Manager might take more notice of our interest.

This Campaign is now official!!!

For all of you who expressed an interest, please sign in on this link: http://armorama.kitmaker.net/modules.php?op=modload&name=Campaigns&file=index&req=showcontent&id=839

As mentioned above, the thread has now moved to the Campaign Forum, so any more volunteers should go here: http://armorama.kitmaker.net/forums/240842&page=1 to post their builds.

Sure I will get hold of picture of it and sent it to you...Cheers