1⁄35
Tuesday, May 26, 2015 - 12:28 PM UTC
Eduard has announced a photo etched set for the 1/35th scale IBG Bedford QL series of models.
This release from Eduard looks to tackle quite a few areas of the model from the engine to the cab interior. The engine gets a new fan and firing harness along with some wheels for the starter and engine itself. The body of the truck gets new rear mudguards and a very nice engine grill along with other detail. The cab interior gets a facelift in the form of an improved instrument panel and even foot pedals. Take a good look at the pictures in this news story to see exactly what gets Eduard treatment.

36315 - Bedford QL series – IBG offering – 1/35th scale.
Photos
Click image to enlarge
  • move
  • move
  • move
Click Star to Rate
3 readers have rated this story.
Get Daily Updates
Get a daily email with links to all our latest news, reviews, and features.

Comments

Wellsbourne
Nice addition......also great to see the rear wheels have been fitted correctly, reverse of the fronts......this was a feature on most if not all British 3 tonners. Not sure why, but front and rear track was always different.
MAY 26, 2015 - 02:33 PM
CMOT
George I have heard it was done in case they got stuck and so provided better traction when rocking back and fourth. I cannot say this is 100% true but it sounds like logical thought.
MAY 26, 2015 - 02:45 PM
barkingdigger
Pity they didn't address the terrible hubs! I did two 3D-printed sets (on Shapeways) for them some time ago, with & without flanges, with the indicator paddle as well. Some day I might finish that build...
MAY 26, 2015 - 03:24 PM
russamotto
The set looks great and will really add some nice details. Too bad there is no gas detection panel or wiper blades included. That would have been a nice inclusion to cover parts left out of the original kits.
MAY 26, 2015 - 05:56 PM
Wellsbourne
CMOT......thanks for that info......would seem reasonable......any word on the ex Larkhill 6" howitzer, it is a rare one.
MAY 26, 2015 - 07:22 PM
CMOT
George they are likely trying to figure out how much of the original can still be saved from the tin worm.
MAY 26, 2015 - 08:22 PM
Go to Forum Topic
THIS STORY HAS BEEN READ 6,216 TIMES.
ADVERTISEMENT

Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
Eduard ReviewsMORE
PE set for the ‘Wolf’ W.M.I.K In-Box Review
by Darren Baker
Sunflowers Built Review
by Andy Brazier | of 2 ratings, 100% found this helpful
Wild flowers/Butterflies In-Box Review
by Andy Brazier | of 3 ratings, 100% found this helpful
Grapevine In-Box Review
by Darren Baker | of 2 ratings, 100% found this helpful
IDF Merkava Mk IV Armour In-Box Review
by Darren Baker
IDF Merkava Mk IV basket 36166 In-Box Review
by Darren Baker | of 1 ratings, 100% found this helpful
IDF Merkava Mk IV detail set In-Box Review
by Darren Baker | of 1 ratings, 100% found this helpful
Leopard 1A5 upgrade set In-Box Review
by Darren Baker
German WWII radios In-Box Review
by Darren Baker | of 2 ratings, 100% found this helpful
Camouflage netting US 1940-'60 In-Box Review
by Andy Brazier | of 2 ratings, 100% found this helpful
Leaves Fern/colour In-Box Review
by Andy Brazier | of 6 ratings, 100% found this helpful
Eduard PE for Opel Blitz In-Box Review
by Karel K. | of 2 ratings, 100% found this helpful
Wehrmacht Radio Equipment In-Box Review
by Dave O'Meara | of 11 ratings, 100% found this helpful
Leopard 2A6M Slat Armour In-Box Review
by Jason Bobrowich | of 7 ratings, 100% found this helpful
LVT-2 Amtrac Sets In-Box Review
by Robert Card | of 3 ratings, 100% found this helpful

ADVERTISEMENT