Armor/AFV
For discussions on tanks, artillery, jeeps, etc.
For discussions on tanks, artillery, jeeps, etc.
Hosted by Darren Baker, Mario Matijasic
Looking for ideas for what to 3D Print
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Saturday, January 21, 2017 - 12:21 PM UTC
And finally, after much crashing and unresponsiveness, the VIC-2 SINCGARS model is back up! I don't know if it will print successfully but it is available. Hopefully I've fixed the problem that stopped it from printing.
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Sunday, January 22, 2017 - 02:48 AM UTC
M85 Barrels finished designing. Will be available in a set of 3.
If anyone believes that something isn't correct please mention it so I can fix it immediately.
If anyone believes that something isn't correct please mention it so I can fix it immediately.
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Wednesday, January 25, 2017 - 02:08 PM UTC
I've started again on the AN/VRC-12 and I'm nearly finished with it. I've also started on a 'secret' project that I'm sure you will like. Pictures of both incoming later today (1/26).
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Friday, January 27, 2017 - 06:16 AM UTC
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Monday, February 06, 2017 - 11:54 PM UTC
The M85 barrels were kicked back when someone purchased one. Thin walls on the muzzle are the reason. It should be an easy fix but I'm afraid that the opening in the barrel may need to be closed I can attempt closing the opening leaving an indentation for anyone who wants to attempt driving it open but that is more of a last-resort solution.
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Thursday, February 09, 2017 - 03:49 PM UTC
The M68 barrels have been updated and I think should be printable now.
dinovision79
Joined: August 27, 2007
KitMaker: 41 posts
Armorama: 37 posts
KitMaker: 41 posts
Armorama: 37 posts
Posted: Thursday, February 09, 2017 - 05:18 PM UTC
Good day Mike,
you mention some time ago, that you have to coke bottles done, any chance they'd be available?
Thank s
Denes
you mention some time ago, that you have to coke bottles done, any chance they'd be available?
Thank s
Denes
ArtyG37B
Joined: August 13, 2009
KitMaker: 420 posts
Armorama: 416 posts
Posted: Thursday, February 09, 2017 - 09:46 PM UTC
Hi Mike,
is it possible to make a set of just RT 524's? say 4 in a set?
is it possible to make a set of just RT 524's? say 4 in a set?
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Friday, February 10, 2017 - 08:27 AM UTC
Quoted Text
Good day Mike,
you mention some time ago, that you have to coke bottles done, any chance they'd be available?
Thank s
Denes
At the time they were finished but I had trouble exporting the model to the correct file format. I recently edited the model to hopefully shave off a bit of expense. I'll get it exported tonight.
Quoted Text
Hi Mike,
is it possible to make a set of just RT 524's? say 4 in a set?
Sure. Shouldn't take long to do.
Removed by original poster on 02/11/17 - 16:25:43 (GMT).
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Saturday, February 11, 2017 - 02:51 PM UTC
Both the bottles and the RT-524 sets are now available.
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Monday, February 13, 2017 - 09:38 PM UTC
I'm going through some preparations to begin drawing up some ruggedized laptops like the Panasonic Toughbook and Dell XFR series.
dinovision79
Joined: August 27, 2007
KitMaker: 41 posts
Armorama: 37 posts
KitMaker: 41 posts
Armorama: 37 posts
Posted: Monday, February 13, 2017 - 09:58 PM UTC
Hi Mike, could you share another view of the bottles?
Thanks!
Thanks!
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Monday, February 13, 2017 - 11:46 PM UTC
Unfortunately the Shapeways render engine isn't working so I can't change the picture in the shop.
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Thursday, February 16, 2017 - 03:04 PM UTC
I completed a set of MGM-51A Shillelagh missiles not too long ago. It will include 10 complete missiles, 4 "in-flight" missiles and 4 end caps. For the in-flight missiles the stabilizing fins are separate. I haven't taken any captures or done any rendering of the model yet.
somtec
Joined: December 01, 2005
KitMaker: 421 posts
Armorama: 325 posts
Posted: Friday, February 17, 2017 - 01:20 AM UTC
Hi May I suggest a muzzle brake for the idf m51 Sherman for replacement of the academy or dragon muzzle brakes.
davejr
Joined: October 30, 2005
KitMaker: 91 posts
Armorama: 80 posts
Posted: Friday, February 17, 2017 - 08:02 PM UTC
How about m-54 cab conversion for the italeri 925 trucks with correct wheels
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Friday, February 17, 2017 - 10:18 PM UTC
Quoted Text
Hi May I suggest a muzzle brake for the idf m51 Sherman for replacement of the academy or dragon muzzle brakes.
I can definitely attempt it. I find some dimensions online so I'll a take a go at it sometime.
Quoted Text
How about m-54 cab conversion for the italeri 925 trucks with correct wheels
I can try it. Biggest challenge would be the hood and compatibility with the Italeri kit because I don't have it on hand.
Removed by original poster on 02/18/17 - 17:35:13 (GMT).
davejr
Joined: October 30, 2005
KitMaker: 91 posts
Armorama: 80 posts
Posted: Friday, February 17, 2017 - 10:37 PM UTC
I could loan a italeri kit to you lol i actually have a chassi built with a real model cab attached.
amoz02t
#192
Joined: November 25, 2009
KitMaker: 1,383 posts
Armorama: 1,281 posts
Posted: Friday, February 17, 2017 - 11:19 PM UTC
Quoted Text
I'm going through some preparations to begin drawing up some ruggedized laptops like the Panasonic Toughbook and Dell XFR series.
Like the VT Miltope Rugged Laptop TSC-750? Gunny reviews here...
https://www.youtube.com/watch?v=dUHWf86ICvk
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Saturday, February 18, 2017 - 02:08 AM UTC
Quoted Text
I could loan a italeri kit to you lol i actually have a chassi built with a real model cab attached.
No need. I just need to find enough pictures.
Quoted Text
Like the VT Miltope Rugged Laptop TSC-750? Gunny reviews here...
https://www.youtube.com/watch?v=dUHWf86ICvk
Yes. I didn't find that computer during my during my searches for ruggedized laptops.
MikeyBugs95
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Friday, March 03, 2017 - 04:36 AM UTC
Has anyone been wanting a CheyTac M200 Intervention lately?
matt
Campaigns AdministratorJoined: February 28, 2002
KitMaker: 5,957 posts
Armorama: 2,956 posts
Posted: Friday, March 03, 2017 - 05:23 AM UTC
Quoted Text
Has anyone been wanting a CheyTac M200 Intervention lately?
I'd be in for a set.
JPTRR
Managing Editor
#051
Joined: December 21, 2002
KitMaker: 7,772 posts
Armorama: 2,447 posts
Posted: Friday, March 03, 2017 - 07:28 AM UTC
I haven't read much of the previous 29 pages so I apologize if someone has already come up with this, but today I had an idea.
How about scanning and printing 1/48 and 1/72 railway subjects? This book shows that before and after Allied liberation, that railways in continental Europe had rolling stock from all over Europe: German & French Railways WW II
Especially with the well-detailed 1/72 models out now, a diorama of a wartime rail yard is practice. Maybe 1/48, too. No need to go for a new scale of HO-1/87 to create such a scene.
How about scanning and printing 1/48 and 1/72 railway subjects? This book shows that before and after Allied liberation, that railways in continental Europe had rolling stock from all over Europe: German & French Railways WW II
Especially with the well-detailed 1/72 models out now, a diorama of a wartime rail yard is practice. Maybe 1/48, too. No need to go for a new scale of HO-1/87 to create such a scene.
 |
WEB HOSTING BY
Copyright ©2021 Armorama and Kitmaker Network, a subsidiary of Silver Star Enterprises
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.