Parts don't fit well so I need some putty to make model look better.
I changed a shovel and added helve for pickaxe. It wasn’t in box but I noticed it at pictures.
For painting and marking I'm going to use Polish scheme.
Campaigns
Where Armorama group builds can be discussed, organized, and updates posted.
Where Armorama group builds can be discussed, organized, and updates posted.
Hosted by Darren Baker, Richard S.
Wheels and Tires
Aniol
Joined: May 29, 2003
KitMaker: 205 posts
Armorama: 166 posts
Posted: Tuesday, August 07, 2007 - 02:03 AM UTC
That is my SKP's I Humber Scout Car.
Parts don't fit well so I need some putty to make model look better.
I changed a shovel and added helve for pickaxe. It wasn’t in box but I noticed it at pictures.
For painting and marking I'm going to use Polish scheme.
Parts don't fit well so I need some putty to make model look better.
I changed a shovel and added helve for pickaxe. It wasn’t in box but I noticed it at pictures.
For painting and marking I'm going to use Polish scheme.
Rbarcon
Joined: September 13, 2005
KitMaker: 34 posts
Armorama: 9 posts
Posted: Tuesday, August 07, 2007 - 03:08 AM UTC
Hi, this is what i am doing for the campaign.
a Scout Car.
Roberto
a Scout Car.
Roberto
NebLWeffah
Joined: October 13, 2004
KitMaker: 1,683 posts
Armorama: 1,248 posts
Posted: Tuesday, August 07, 2007 - 03:45 AM UTC
Hi kids...
Just signed up for this campaign. I'm going to enter my Canadian Army Cougar. I think I'm going to show it as a UN vehicle in Bosnia but not sure yet, Here's a couple of WIP pics....
It's the Best Value Models kit from Azimut and has some resin parts, the Revell LAV 25 (shortened) hull and the AFV Club Scorpion turret. More later...
Bob
Just signed up for this campaign. I'm going to enter my Canadian Army Cougar. I think I'm going to show it as a UN vehicle in Bosnia but not sure yet, Here's a couple of WIP pics....
It's the Best Value Models kit from Azimut and has some resin parts, the Revell LAV 25 (shortened) hull and the AFV Club Scorpion turret. More later...
Bob
f1matt
Joined: August 13, 2006
KitMaker: 1,021 posts
Armorama: 805 posts
Posted: Sunday, August 12, 2007 - 05:23 PM UTC
Well here is my AFV Club Stryker. She's wearing paint and stowage now but my camera died. Will post some updated pics when I can. The stowage is from Blast (sets 1 and 2) along with some from the ol' spares box. I might add a couple of crew figures too.
USArmy2534
Joined: January 28, 2004
KitMaker: 2,716 posts
Armorama: 1,864 posts
Posted: Monday, August 13, 2007 - 12:03 AM UTC
Bob, Your Cougar is looking great. It looks like its quite a conversion
Matt, man I would love to get my hands on that kit....and a few hours of spare time. Hope your camera revives soon.
Jeff
Matt, man I would love to get my hands on that kit....and a few hours of spare time. Hope your camera revives soon.
Jeff
spongya
Associate Editor
Joined: February 01, 2005
KitMaker: 2,365 posts
Armorama: 1,709 posts
Posted: Monday, August 13, 2007 - 07:41 AM UTC
I still haven't been able to start my build. The Eduard PE hasn't arrived yet from Luckymodels -and I ordered it at the end of May...
f1matt
Joined: August 13, 2006
KitMaker: 1,021 posts
Armorama: 805 posts
Posted: Tuesday, August 14, 2007 - 07:11 PM UTC
Well thanks to my sister's camera I can update my wip pics. This is how my AFV Club Stryker looks as of right now. I guess I must have painted it the right colour as it blends in well with the background. Camo really works! Still a ways to go but getting there.
Rbarcon
Joined: September 13, 2005
KitMaker: 34 posts
Armorama: 9 posts
Posted: Tuesday, August 14, 2007 - 11:57 PM UTC
Quoted Text
Well thanks to my sister's camera I can update my wip pics. This is how my AFV Club Stryker looks as of right now. I guess I must have painted it the right colour as it blends in well with the background. Camo really works! Still a ways to go but getting there.
nice work! but pay attention to the front line it must be sanded to complete a perfect line, the rest is perfect for me
Roberto
f1matt
Joined: August 13, 2006
KitMaker: 1,021 posts
Armorama: 805 posts
Posted: Wednesday, August 15, 2007 - 05:50 AM UTC
That front line is actually gonna be covered by another piece yet to be added so you won't see it when its all done. Overall, the kit fits together really well. AFV Club did a great job with this one. 
SGTJKJ
#041
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Friday, August 17, 2007 - 12:10 AM UTC
I have now finished my BTR-80 in Russian 3 colour camouflage with shark teeth markings. I kept the weathering light to show of the shark teeth markings 
It is the Zvezda 1/35 kit that comes together quite well and with reasonable detail. The figure is a Russian crew figure from the spares box.
I am quite satisfied with the result.
It is really a well run campaign so far and It has been great fun to participate in the campaign.
It is the Zvezda 1/35 kit that comes together quite well and with reasonable detail. The figure is a Russian crew figure from the spares box.
I am quite satisfied with the result.
It is really a well run campaign so far and It has been great fun to participate in the campaign.
gbkirsch
Joined: June 04, 2005
KitMaker: 627 posts
Armorama: 455 posts
Posted: Saturday, August 18, 2007 - 10:45 AM UTC
Quoted Text
Wow, its great to see all these great models being built. Gary your BTR turned out great. Do you happen to know what the Arabic says?
Jeff, I don't know exactly what it says but I believe I read somewhere the Syrians celebrate their Martyrs and name the vehicles after those fellows. I believe I bought the decals off Ebay from Decalcomaniancs.
Thanks for your comments and the best to Gary (Troubble27) and his family...
Gary
Tankleader
Joined: April 29, 2003
KitMaker: 718 posts
Armorama: 684 posts
Posted: Saturday, August 18, 2007 - 02:41 PM UTC
Hello All,
Here is my Trumpeter Stryker in fictional markings.
Tanks
Andy
Here is my Trumpeter Stryker in fictional markings.
Tanks
Andy
JeepLC
Joined: June 20, 2007
KitMaker: 510 posts
Armorama: 469 posts
Posted: Saturday, August 18, 2007 - 05:09 PM UTC
I wish the Marines got some... guess i'll be happy with the LAV. Maybe i'll drive a new MRAP. Great job on the kit it looks really good.
-Mike
-Mike
wanagun
#145
Joined: June 22, 2006
KitMaker: 471 posts
Armorama: 383 posts
Posted: Tuesday, August 21, 2007 - 05:51 AM UTC
here is my entry. Ford GPA Germnay 1945
USArmy2534
Joined: January 28, 2004
KitMaker: 2,716 posts
Armorama: 1,864 posts
Posted: Tuesday, August 21, 2007 - 08:44 AM UTC
Scott, a mighty fine entry. Check your PM.
Jeff
Jeff
spongya
Associate EditorJoined: February 01, 2005
KitMaker: 2,365 posts
Armorama: 1,709 posts
Posted: Tuesday, August 21, 2007 - 09:05 AM UTC
God bless Eduard. I downloaded the instructions from their webpage. I built up everything in the Rover, up to the point of the extra PE parts, and now I'm waiting again for the Eduard set to arrive.
NebLWeffah
Joined: October 13, 2004
KitMaker: 1,683 posts
Armorama: 1,248 posts
Posted: Tuesday, August 21, 2007 - 09:31 AM UTC
Here's a few more WIP shots of my Cougar....
Model master gunship gray in a rattle can for a primer coat. Still some details left to go and then the painting starts. Lots of fun, this one...
Bob
Model master gunship gray in a rattle can for a primer coat. Still some details left to go and then the painting starts. Lots of fun, this one...
Bob
SGTJKJ
#041
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Tuesday, August 21, 2007 - 06:47 PM UTC
Bob, that looks great! It will be a fine entry into the campaign.
I am looking forward to see it with the final paint coat on.
I am looking forward to see it with the final paint coat on.
USArmy2534
Joined: January 28, 2004
KitMaker: 2,716 posts
Armorama: 1,864 posts
Posted: Wednesday, August 22, 2007 - 01:41 PM UTC
I agree, Bob that is amazing. I especially like the Moon camo scheme, it'd hide well there 
Ok, so I need some help guys. I need to make a campaign ribbon, but I am having a creativity block, plus school is rearing its huge head, so here i the deal: I'm opening it up to everyone here. It needs to be 50x20 pixels. The one that we think best looks embues the.....essence of the campaign is the one I'll use. So go to it.
Jeff
Ok, so I need some help guys. I need to make a campaign ribbon, but I am having a creativity block, plus school is rearing its huge head, so here i the deal: I'm opening it up to everyone here. It needs to be 50x20 pixels. The one that we think best looks embues the.....essence of the campaign is the one I'll use. So go to it.
Jeff
USArmy2534
Joined: January 28, 2004
KitMaker: 2,716 posts
Armorama: 1,864 posts
Posted: Wednesday, August 22, 2007 - 02:01 PM UTC
Here are the ribbons from the first two campaigns Top one was created by the former MrRoo (ala Cliff Hutchings...anyone heard anything from him or is his name still taboo?) from the first Move It and the other was by me from Move It Again. Just in case it helps:
Jeff
Jeff
paulanama
Joined: November 06, 2006
KitMaker: 3 posts
Armorama: 2 posts
KitMaker: 3 posts
Armorama: 2 posts
Posted: Wednesday, August 22, 2007 - 10:28 PM UTC
Quoted Text
Ok so its official, we are good to go. We start June 1st and end December 1st. Feel free to post anything necessary here.
https://armorama.kitmaker.net/modules.php?op=modload&name=Campaigns&file=index&req=showcontent&id=195
Jeff
Hi Jeff,
I'm gonna hook up with this one...my first campaign. Gotta start sometime. I think I'm gonna work on something quick since I got a late start...probably pretty much OOTB. Might do a an Italeri jeep with some brass thrown in for the Ma Duece. Should be a quick build no???
f1matt
Joined: August 13, 2006
KitMaker: 1,021 posts
Armorama: 805 posts
Posted: Thursday, August 23, 2007 - 05:29 PM UTC
I wouldn't worry too much about getting done. Still got lot's of time left. I personally have only seen Tamiya's Jeep done up. Curious to see Italeri's. Good luck with your build.
paulanama
Joined: November 06, 2006
KitMaker: 3 posts
Armorama: 2 posts
KitMaker: 3 posts
Armorama: 2 posts
Posted: Friday, August 24, 2007 - 04:24 PM UTC
Hi Matt,
Thanks for the well wishes...I'm ready to start...blew the dust off the Italeri box and found my stash of Collectors Brass accessories that I misplaced ( funny how one loses track of things when they stuff it in "safe" places) . Will post pics as soon as I'm done and when I figure out how to exactly do that???
Thanks for the well wishes...I'm ready to start...blew the dust off the Italeri box and found my stash of Collectors Brass accessories that I misplaced ( funny how one loses track of things when they stuff it in "safe" places) . Will post pics as soon as I'm done and when I figure out how to exactly do that???
f1matt
Joined: August 13, 2006
KitMaker: 1,021 posts
Armorama: 805 posts
Posted: Friday, August 24, 2007 - 06:23 PM UTC
Well as far as posting pics it's pretty staright forward. First you have to store your pics online somewhere. I just put mine at the kitmaker site. Just click on the photos link near the top of the page. Upload your pictures there and then when you want to post a picture just copy the UBB code that is at the bottom of the picture and paste that in your reply . At least that's how I do it and it has worked so far. Hope some of that makes sense.
sroth88
Joined: August 13, 2007
KitMaker: 109 posts
Armorama: 63 posts
Posted: Tuesday, August 28, 2007 - 12:39 PM UTC
I am doing the German Horch1a with the Flak38. I have started the build ready to spray some paint. 
https://gallery.kitmaker.net/data/19364/thumbs/German_Horch_1.JPG
 |
WEB HOSTING BY
Copyright ©2021 Armorama and Kitmaker Network, a subsidiary of Silver Star Enterprises
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.